The enclosure ID, comprised of two seven-segment numbers, is located on the back of each controller next to the indicator lights. It provides a unique identifier for each enclosure in the disk storage configuration.
The controller automatically sets the enclosure ID number. You can change the setting through the storage management software if necessary. Both controller enclosure ID numbers are identical under normal operating conditions.
The allowable ranges for enclosure ID settings are 0-99. Do not set the enclosure ID to 00 or any number less than 80. The disk controller enclosure ID is normally set to a value of 85 at the factory.
Figure 1 shows the enclosure ID.
Figure 1. Disk
controller seven-segment enclosure ID
| Number | Description |
|---|---|
| 1 | Enclosure ID |