Selection criteria keywords
Use selection criteria keywords with the INCLUDE or EXCLUDE keywords to specify the items to include or exclude from Advanced Allocation Management processing.
Note the following items in the syntax descriptions:
- The underlined portion of the keyword indicates the minimally acceptable abbreviation.
- $NULL indicates that the particular selection criterion was not specified.
- op represents the comparison operands (EQ, NE, LT, GT, LE, and GE).
- The default that is listed is the default for the Advanced Allocation Management keyword, not the default that is assigned to the particular attribute by the operating system, unless otherwise specifically noted.
- Where applicable, the JCL, IDCAMS, and Data, Management, and Storage Class equivalents are listed. For the Data, Management, or Storage Class equivalents, the field name from the appropriate ISMF panel that is used to define the class is listed.
- user_var indicates a user-defined variable.
- The use of numeric suffixes is permitted.
- ACCBIAS
(VSAM only.) The ACCBIAS keyword specifies the assigned VSAM System Managed Buffering specification. - ADISP
The ADISP keyword specifies the abnormal termination disposition for a data set. - BLKSIZE
(Non-VSAM only.) The BLKSIZE keyword specifies the defined block size for a data set. - BUFSPC
(VSAM only.) The BUFSPC keyword specifies the defined buffer space specification for a data set. - CISZ
(VSAM only.) The CISZ keyword specifies the defined control interval size for a VSAM cluster. - CISZ_DATA
(VSAM only.) The CISZ_DATA keyword specifies the defined control interval size for the data component of a VSAM cluster. - CISZ_INDEX
(VSAM only.) The CISZ_INDEX keyword specifies the defined control interval size for the index component of a VSAM cluster. - CONTIGUOUS
(Non-VSAM disk data sets only.) The CONTIGUOUS keyword specifies whether the CONTIG option was specified when allocating a new data set. - DATACLAS
The DATACLAS keyword specifies the SMS data class that is assigned to a data set. - DDNAME
The DDNAME keyword specifies a ddname that is assigned to a data set. - DEFERMOUNT
(Tape devices only.) The DEFERMOUNT keyword specifies whether the DEFER option was specified for the UNIT keyword. - DEVICECLASS
The DEVICECLASS keyword specifies the type of device that is assigned to the data set. - DIRBLKS
(PDS and PDS/E data sets only.) The DIRBLKS keyword specifies the number of directory blocks that are assigned to a PDS or PDS/E data set. - DSNAME
The DSNAME keyword specifies a data set name. - DSNAME_DATA
(VSAM data sets only.) The DSNAME_DATA keyword specifies the data set name of the data component of a VSAM cluster. - DSNAME_INDEX
(VSAM data sets only.) The DSNAME_INDEX keyword specifies the data set name of the index component of a VSAM cluster. - DSNAME_LASTNODE
The DSNAME_LASTNODE keyword specifies the last qualifier of a data set name. - DSNAME_QUALIFIER
The DSNAME_QUALIFIER keyword specifies one of the qualifiers of a data set name. - DSNAME_TYPE
The DSNAME_TYPE keyword specifies the type of data set. - DSORG
The DSORG keyword specifies the data set organization for non-VSAM data sets and the record organization for VSAM data sets. - EATTR
The EATTR keyword specifies the assigned Extended Attribute value for a data set. z/OS® uses the Extended Attributes value to assign eligibility for use of cylinder-managed space on an Extended Address Volume (EAV). - ERASE
(VSAM data sets only.) The ERASE keyword specifies whether the VSAM ERASE option was specified. - EXPDATE
The EXPDATE keyword specifies an expiration date for a data set. - EXTADDR
(VSAM data sets only.) The EXTADDR keyword specifies the Extended Addressability attribute for a VSAM cluster. - FILESEQNO
(Tape data sets only.) The FILESEQNO keyword specifies a file sequence number of a data set. - FRLOG
(VSAM data sets only.) The FRLOG keyword specifies whether VSAM batch logging was specified for a VSAM data set. - FSPC_CA
(VSAM data sets only.) The FSPC_CA keyword specifies the freespace percentage for the control area of a VSAM data set. - FSPC_CI
(VSAM data sets only.) The FSPC_CI keyword specifies the freespace percentage for the control interval of a VSAM data set. - GROUPID
The GROUPID keyword specifies a security group (such as a RACF® or equivalent security product) identifier. - GUARSPACE
The GUARSPACE keyword specifies the Guaranteed Space attribute for the data set as defined in the SMS storage class. - ILOAD
(VSAM data sets only.) The ILOAD keyword specifies the initial load option that is specified for a VSAM data set. - JOBACCTn
(VSAM and non-VSAM.) The JOBACCTn keyword specifies one of the first fifteen Job Accounting field specifications. - JOBCLASS
The JOBCLASS keyword specifies a single character JES job class. - JOBNAME
The JOBNAME keyword specifies the name of the job, started task, or TSO user ID that is associated with the task that is processing a data set. - JOBTYPE
The JOBTYPE keyword specifies the type of address space. - KEY_LEN
(Key sequenced VSAM data sets only.) The KEY_LEN keyword specifies the key length of a key-sequenced VSAM data set. - KEY_OFF
(Key sequenced VSAM data sets only.) The KEY_OFF keyword specifies the offset of the key in a key-sequenced VSAM data set. - LOGGING
(VSAM RLS data sets only.) The LOGGING keyword specifies the type of logging performed for the sphere of a VSAM RLS data set. - LOGSTREAM_ID
(SMS-managed VSAM data sets only.) The LOGSTREAM_ID keyword specifies the name of a logstream data set for an SMS-managed VSAM data set. - LRECL
The LRECL keyword specifies the record length of a data set. - MAXSPACE
The MAXSPACE keyword specifies the maximum potential space on the first volume of a data set. - MGMTCLAS
(SMS-managed data sets only.) The MGMTCLAS keyword specifies the SMS management class that is assigned to an SMS data set. - MOUNT_USAGE
(Non-SMS, non-VSAM data sets only.) MOUNT_USAGE specifies the mount usage type of the current volume at the time an Advanced Allocation Management function is performed. - NDISP
The NDISP keyword specifies the normal termination disposition for a data set. - NUMVOLS
The NUMVOLS keyword specifies the number of volumes that are defined to a VSAM cluster. - NUMVOLS_DATA
The NUMVOLS_DATA keyword specifies the number of volumes to be defined for the data component of a VSAM cluster. - NUMVOLS_INDEX
The NUMVOLS_INDEX keyword specifies the number of volumes to be defined for the index component of a VSAM cluster. - OWNERID
The OWNERID keyword specifies the owner identification for the data set as stored in the catalog. - PQTY
The PQTY keyword specifies the primary quantity value that is assigned to the data set. - PQTY_DATA
(VSAM data sets only.) The PQTY_DATA keyword specifies the primary quantity value that is assigned to the data component of a VSAM data set. - PQTY_INDEX
(VSAM data sets only.) The PQTY_INDEX keyword specifies the primary quantity value that is assigned to the index component of a VSAM data set. - PROCSTEPNAME
The PROCSTEPNAME keyword specifies a procedure step name. - PROGRAM
The PROGRAM keyword specifies the job-step program name that is active when a particular Advanced Allocation Management function is performed. - PSPACE_KB
The PSPACE_KB keyword specifies the requested or actual primary space that is allocated to a data set in kilobytes. - PSPACE_MB
The PSPACE_MB keyword specifies the requested, or actual, primary space that is allocated to a data set in megabytes. - RECFM
(Non-VSAM data sets only.) The RECFM keyword specifies the record format for a non-VSAM data set. - RELEASESPACE
(Non-VSAM data sets.) The RELEASESPACE keyword specifies whether space release was specified. - RETPD
The RETPD keyword specifies the retention period for a data set. - REUSE
(VSAM data sets only.) The REUSE keyword specifies whether the VSAM REUSE option was specified. - SDISP
The SDISP keyword specifies the status disposition for a data set. - SHROPT_XRGN
(VSAM data sets only.) The SHROPT_XGRN keyword specifies the SHAREOPTIONS for cross-region sharing. - SHROPT_XSYS
(VSAM data sets only.) The SHROPT_XSYS keyword specifies the SHAREOPTIONS for cross-system sharing. - SMS_MANAGED
The SMS_MANAGED keyword specifies whether the data set is under SMS control. - SPACEUNITS
The SPACEUNITS keyword specifies the allocation unit type for a data set. - SPACEUNITS_DATA
(VSAM data sets only.) The SPACEUNITS_DATA keyword specifies the allocation units for the data component of a VSAM data set. - SPACEUNITS_INDEX
(VSAM data sets only.) The SPACEUNITS_INDEX keyword specifies the allocation units for the index component of a VSAM data set. - SPANNED
(VSAM data sets only.) The SPANNED keyword specifies whether the SPANNED option is defined for a VSAM data set. - SQTY
The SQTY keyword specifies the secondary quantity value that is assigned to the data set. - SQTY_DATA
(VSAM data sets only.) The SQTY_DATA keyword specifies the secondary quantity value that is assigned to the data component of a VSAM data set. - SQTY_INDEX
(VSAM data sets only.) The SQTY_INDEX keyword specifies the secondary quantity value that is assigned to the index component of a VSAM data set. - STEPACCTn
(VSAM and non-VSAM data sets.) The STEPACCTn keyword specifies one of the first fifteen Step Accounting field specifications. - STEPNAME
The STEPNAME keyword specifies the step name that is assigned to a job step. - STORCLAS
The STORCLAS keyword specifies an SMS storage class that is assigned to an SMS data set. - STORGRP
The STORGRP keyword specifies an SMS storage group that is assigned to an SMS data set. - SUBSYS
The SUBSYS keyword specifies a subsystem name that is assigned to an Advanced Allocation Management address space. - SYSID
The SYSID keyword specifies an OS/390® or z/OS system ID. - SYSPLEXNAME
The SYSPLEXNAME keyword specifies the z/OS name that is assigned to the sysplex. - TAPE_COMP
(Tape data sets only.) The TAPE_COMP keyword specifies the defined data compaction setting for a tape data set. - TAPE_LABEL
(Non-VSAM tape data sets only.) The TAPE_LABEL keyword specifies the type of tape label that is used for a data set. - TEMPDS
The TEMPDS keyword specifies whether the data set is temporary. - UNIT_AFFINITY
The UNIT_AFFINITY keyword specifies whether UNIT affinity is defined for a data set. - UNIT_COUNT
The UNIT_COUNT keyword specifies the number of units that are assigned to the data set. - UNIT_NAME
The UNIT_NAME keyword specifies the generic or esoteric unit names. - UNIT_TYPE
The UNIT_TYPE keyword specifies the type of unit on which a data set is allocated. - USERID
The USERID keyword specifies a user ID (such as a RACF or equivalent security product user ID). - VOLCT
The VOLCT keyword specifies the number of volumes that are defined to the data set. - VOLSER_ANY
The VOLSER_ANY keyword specifies any volume serial number. - VOLSER_CURRENT
The VOLSER_CURRENT keyword specifies a volume serial number of the current volume that is being processed when a particular function is being performed. - VOLSER_FIRST
The VOLSER_FIRST keyword specifies a volume serial number of the first volume of the data set. - VSAM_SEPARATE
(VSAM data sets only.) VSAM_SEPARATE specifies whether the index and data components of a VSAM data set are on separate volumes.
Parent topic: Rule definition syntax