Messages
The table below lists the messages generated by TAPEDEL.
Note: For
information on messages associated with the user interface, refer
to TAPCMD.
Message number | Message text | Return code |
---|---|---|
EUM0002E | Unauthorized <text> from <reqID>. | 20 |
EUM0005E | Invalid value - <value> - for <parm>. | 24 |
EUM0007E | Error returned from <routine> - RC <return code>. | 30 |
EUM0010I | <cmnd> message <reqnum> required from <user ID>. | N/A |
EUM0011E | Unknown command <req> in request <req#> from <reqID>. | 16 |
EUM0022E | Pool ID <pool> is not a valid pool name. | 24 |
EUM0024E | Pool ID <pool> does not exist. | N/A |
EUM0031E | Required parameter <parm> not specified. | 24 |
EUM0032E | Invalid parameter <parm>. | 24 |
EUM0034E | Error <return code> linking <mdsk>. | 34 |
EUM0035E | Authorization error <return code> linking <mdsk>. | 34 |
EUM0036E | Error <return code> accessing <vaddr>. | 34 |
EUM0037E | Error <return code> locating file <file name>. | 26 |
EUM0038E | Error <return code> reading file <file name>. | 26 |
EUM0039E | File <file name> cannot be processed due to a version mismatch. | 26 |
EUM0040E | File <file name> cannot be processed due to a record type error. | 26 |
EUM0041E | Invalid delimiter for <parm>. | 24 |
EUM0042E | No values found in file <file name>. | 24 |
EUM0043E | Invalid value <val> found in file <file name>. | 24 |
EUM0044E | The length of <parm> is less than the system minimum <min>. | 24 |
EUM0045E | The length of <parm> exceeds the system maximum <max>. | 24 |
EUM0046E | The length of <parm> exceeds the maximum of <max>. | 24 |
EUM0049E | Volume <vol> is in private pool <pool ID>. | 20 |
EUM0051E | User <user ID> is not authorized to alter the system inventory. | 20 |
EUM0054E | Volume <vol> is not in <pool name>. | 28 |
EUM0055E | Volume <vol> is ineligible - status <volstat>. | 28 |
EUM0056E | User <user ID> is not authorized to alter pool <pool ID>. | 20 |
EUM0057E | Volume <vol> was not deleted because only external volumes can be deleted when the pool is not SYS. | N/A |
EUM0065E | Volume <vol> is not in the system inventory. | 28 |
EUM0075E | Unexpected return code from <command> - RC <return code>. | 30 |
EUM0077E | Volume index error: INV=<invvol> VOL=<indxvol> IND=<indxval>. | 30 |
EUM0083I | <cmnd> request <reqnum> complete – RC <rc>. | N/A |
EUM0084I | <cmnd> request <reqnum> error – RC <rc>. | N/A |
EUM0125I | Volume <volume name> in pool <pool name> not in inventory. | 30 |
EUM0146E | Source and target pool media types do not match. | 24 |
EUM0148E | Source and target are the same pool. | 24 |
EUM0156E | Invalid index entry for volume <volume name> | 30 |
EUM0161I | Volume <vol> not processed - not in source pool. | N/A |
EUM0162I | Volume <vol> not processed - status USED is invalid for pool sys. | N/A |
EUM0163I | Volume <vol> not processed - EXTERNAL tape is invalid for pool sys. | N/A |
EUM0164I | Volume <vol> not processed - wrong media type for target pool. | N/A |
EUM0165I | Volume <vol> not processed - in use. | N/A |
EUM0166I | Source pool not deleted. | N/A |
EUM0167I | Request completed with volume errors. | N/A |
EUM0171E | Error <return code> processing file <file>. | 30 |
EUM0172E | Error <return code> writing file <file>. | 30 |
EUM0174E | Volume count is negative. | 30 |
EUM0175E | Volume count is not numeric. | 30 |
EUM0176E | Index error processing <req#> request. | 30 |
EUM0181I | Volume <vol> not processed - invalid index. | 30 |
EUM0187E | Invalid file info passed for pool <pool>. | 30 |
EUM0188I | File info is <text>. | N/A |
EUM0206I | Expired volumes in pool <pool1> retained - free pool <pool2> not found. | N/A |
EUM0207I | Expired volumes in pool <pool1> retained - free pool <pool2> has wrong media. | N/A |
EUM0221E | <type> request <req#> from <rqstID> was rejected by the installation exit processing. | 20 |
EUM0329E | <msg> | N/A |
EUM0349E | Request <req#> could not be processed by the installation command exit. | 20 |
EUM0352E | <req> request <reqnum> from <rqstID> was rejected because the response from the installation command exit timed out. | 20 |
EUM0392W | The used tape percentage in pool <powner pname> has reached <pct> percent
of the tape maximum. or The used tape percentage in pool <powner pname> has reached <pct> percent of the tape total. |
N/A |
EUM0393W | The free count exceeds the tape count for pool <powner pname>. | N/A |
EUM0395W | The tape count exceeds the tape maximum for pool <powner pname>. | N/A |
EUM0396W | The <value> for pool <powner pname> is invalid. | N/A |
EUM0402I | Tape pool <powner pname> has no tapes and no free pool. | N/A |
EUM0403I | Tape pool <powner pname> has a maximum tape value of zero. | N/A |
EUM0472W | Mount message ID <ID> for pool <pool> is not valid. The system mount message ID will be used if it is defined. | N/A |
EUM0496W | Exception ID <ID> for pool <pool> is not defined to the system. | N/A |
EUM0523E | No volumes for DSN <name> in record <num>. | 30 |
EUM0524E | The volume count for DSN <name> exceeds the maximum of <max> in record <num> of file <file>. | 30 |
EUM0525E | The record length for <type> record <num> exceeds the maximum of <max>. | 30 |
EUM0526E | The record number - <num> - for the <type> record is not numeric. | 30 |
EUM0527E | The record number <num> for the <type> record is beyond EOF. | 30 |
EUM0528E | The record number <num> for the <type> record is negative. | 30 |
EUM0535E | An invalid <name> field was detected in record <num> of file <file>. | 30 |
EUM0541E | Qualifier number <num> of the data set name is not valid. | 24 |
EUM0542E | The length of volume <vol> exceeds the system maximum of <max> in record <num> of file <file>. | 30 |
EUM0543E | The length of volume <vol> is less than the system minimum of <min> in record <num> of file <file> | 30 |
EUM0544E | Data set name <name> in record <num> of file <file> failed the validity check. | 30 |
EUM0558E | Volume <vol> in record <num> of file <file> is not defined to the system. | 30 |
EUM0559W | The record type has been changed to <val> for record <num> in file <file>. | 30 |
EUM0560W | The record version has been changed to <val> for record <num> in file <file>. | 30 |
EUM0566E | The use-status of volume <vol> is not <val>. | 30 |
EUM0584I | Pending volumes have been released for DSN occurrence <text>. | N/A |
EUM0589I | Data set <name> associated with volume <vol> will be deleted. | N/A |
EUM0601E | The FILE parameter requires a file name and file type. | 24 |
EUM0606E | Volume <vol> is in the system pool but it is associated with data set <dsname>. | 30 |
EUM0607E | Volume <vol1> is in pool <pool1> but volume <vol2> is in pool <pool2>. The volumes are associated with data set <dsname>. | 20 |
EUM0610E | An invalid record pointer -<recnum> - was passed from the calling routine. | 30 |
EUM0613E | Data set volume <vol> is not in the system inventory. The volume is associated with data set <dsname>. | 30 |
EUM0614E | Data set volume <vol> has an index problem. The volume is associated with data set <dsname>. | 30 |
EUM0722E | <req> request <req#> could not be sent to node <name>. | 26 |
EUM0734E | The <req> command was not accepted because catalog node <name> is quiesced. | 20 |
EUM0735E | The <req> command was not accepted because local node <name> is quiesced. | 20 |
EUM0736E | The <req> command was not accepted because Tape Manager is quiesced. | 20 |
EUM0812E | The <req> command was not accepted because External Security Manager authorizations cannot be performed – RC <rc>. | 20 |
EUM0817E | User <reqID> failed the External Security Manager check for the <req> command. | N/A |
EUM0831E | Unable to authorize user <reqID> for <req> request <req#> – the details were logged. | 20 |
EUM0875E | An invalid value -<val>- was specified for a volume range. | 24 |
EUM0913E | Only one space-delimited minus sign ( - ) can be specified in the volume parameter. | 24 |
EUM0914E | The volume parameter cannot contain a hyphen that is preceded by a character and followed by a space. | 24 |
EUM0915E | The volume parameter cannot contain a hyphen that is preceded by a space and followed by a character. | 24 |
EUM0916E | The volume parameter cannot contain a hyphen prior to the first volume operand. | 24 |
EUM0917E | The <parm> parameter is not a valid QRY parameter | 24 |
EUM0918E | When QRY is specified QEND must also be specified. | 24 |
EUM0919E | The minimum length required to match the pattern <pattern> exceeds the system maximum length of <max> for <parm>. | 24 |
EUM0920I | Query processing returned RC <rc>. See the TAPEQRY command for messages and return codes. | |
EUM0921I | <cmd> processing was not performed because LIST was specified as a QRY operand. |