Step 2. Removing the internal drive

Edit online
Figure 1. Removing cables from the internal drive
Removing cables from the internal drive
  1. Unplug the SAS interface cable and the ethernet interface cable ( 1  and  2  in Figure 1) from the drive. Disconnecting the internal SAS interface cable disconnects both the SAS interface and electrical power from the drive.
    Attention: DO NOT UNPLUG THE INTERNAL POWER CABLE.
  2. Press the latch assembly to release the drive.
    Figure 2. Releasing the drive from the chassis
    Releasing the drive from the chassis
  3. Slide the internal drive forward towards the front of the chassis to clear the front bezel.
    Figure 3. Sliding the drive forward
    Sliding the drive forward