Enter a hex value (X'00' through X'7F') for the LP. This parameter
identifies the LP and is used as the third and fourth hexadecimal digit of the operand stored by the
Store CPU ID Instruction for each logical core in the LP. The partition identifier must be unique
for each active LP.
Mode
Select an LP operating mode from this scrollable list - General,
Linux-Only, SSC, z/VM, or Coupling facility mode.
Clock type assignment
Select a time source for setting the logical partition's time-of-day
(TOD) clock:
Standard time of day
Select this option to set the logical partition's clock to the
same time set for the CPC's time source (either the CPC TOD clock
or an external time reference, such as the STP).
Logical partition time offset
Select this option to set the logical partition's clock using an offset from the time of day
supplied by its time source. Then use the Time Offset window to set the offset.
Ensure that the image profile data conforms to the current maximum
LICCC configuration
Select this option to ensure that the image profile data conforms
to the current maximum Licensed Internal Code Configuration Control
(LICCC) configuration.
