Normative references

Edit online

The following standards contain provisions that, through reference in this text, constitute provisions of this publication. These documents are subject to change and may be revised, replaced, or supplemented. Consult the latest available revisions or supplements.

Equivalent EIA test procedures as specified in CCITT G.651 or G.652 can be used.

All FOTPs are EIA/TIA-455-XXX.

  • FOTP-27 Methods for Measuring Outside (Uncoated) Diameter of Optical Waveguide Fibers
  • FOTP-30 Frequency Domain Measurement of Multimode Optical Fiber Information Transmission Capacity
  • FOTP-45 Microscopic Method for Measuring Fiber Geometry of Optical Waveguide Fibers
  • FOTP-47 Output Far-Field Radiation Pattern Measurement
  • FOTP-48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
  • FOTP-51 Pulse Distortion Measurement of Multimode Glass Optical Fiber Information Transmission Capacity
  • FOTP-54 Mode Scrambler Requirements for Overfilled Launching Conditions to Multimode Fibers
  • FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers
  • FOTP-80 Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
  • FOTP-107 Return Loss for Fiber Optic Components
  • FOTP-127 Spectral Characteristics of Multimode Lasers
  • FOTP-164 Single-Mode Fiber, Measurement of Mode Field Diameter by Far-Field Scanning
  • FOTP-167 Mode Field Diameter Measurement - Variable Aperture Method in the Far-Field
  • FOTP-168 Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode Optical Fibers by Spectral Group Delay Measurement in the Time Domain
  • FOTP-170 Cable Cutoff Wavelength of Single-Mode Fiber by Transmitted Power
  • FOTP-171 Attenuation by Substitution Measurement - for Short-Length Multimode Graded-Index and Single-Mode Optical Fiber Cable Assemblies Short-Length Multimode Graded-Index and Single-Mode Optical Fiber Cable Assemblies
  • FOTP-176 Measurement Method of Optical Fiber Geometry by Automated Grey-Scale Analysis
  • FOTP-177 Numerical Aperture Measurement of Graded-Index Optical Fibers

Copies can be obtained by writing to:

     Director of Technical Programs
     Information and Telecommunication Technologies
     Electronic Industries Association
     2001 Eye Street N.W.
     Washington, D.C.   20066