Secure Service Container parameter descriptions
The profile tree view contains the SSC page. When the Secure Service Container partition is activated, the sequence of events varies, depending which boot selection you specified on the SSC page of the image profile.
- Boot selection
-
- Secure Service Container installer
- Select this option if you want the partition start process to initialize the Secure Service Container Installer so you can install an appliance. This boot selection is the only option when you start a newly configured Secure Service Container partition for the first time. With this option, the Secure Service Container Installer is started automatically. When the start process competes, you can access the Secure Service Container Installer through your choice of browser.
- Secure Service Container
- Select this option if you want the partition start process to effectively restart an installed appliance. If you previously used the Secure Service Container Installer to successfully install a firmware or software appliance, this boot selection becomes the default selection in the image profile for the Secure Service Container partition. In this case, the Secure Service Container Installer is rebooted, and the installed appliance is restarted in the Secure Service Container partition on this and all subsequent reboots, until you change the boot selection in the image profile.
- Administrator user ID
- Enter the user ID to be used as the default administrator user ID.
- Administrator password
- Enter the password for the administrator user ID. An administrator password can have a minimum of 8 characters and a maximum of 256 characters.
- Confirm administrator password
- Re-enter the password exactly as you typed it for the administrator password field.
- Host name
- Enter the host name for the partition.
- Network Adapters
- Select a network adapter and select an action from the drop-down menu.
- IPv4 gateway
- Use the network adapter table to view and change an IPv4 address and detail settings for the selected network adapters.
- IPv6 gateway
- Use the network adapter table to view and change an IPv6 address and detail settings for the selected network adapters.
- DNS Servers
- Use the DNS servers table to add, edit, or remove the IP address for the IPv4 or IPv6 address.