IBM Storage Scale RAID messages

This section lists the IBM Storage Scale RAID messages.

For information about the severity designations of these messages, see Message severity tags.

6027-1850 [E]
NSD-RAID services are not configured on a node nodeName. Check the nsdRAIDTracks and nsdRAIDBufferPoolSizePct configuration attributes.
6027-1851 [A]
Cannot configure NSD-RAID services. The nsdRAIDBufferPoolSizePct of the pagepool must result in at least 128MiB of space.
6027-1852 [A]
Cannot configure NSD-RAID services. nsdRAIDTracks is too large, the maximum on this node is value.
6027-1853 [E]
Recovery group recoveryGroupName does not exist or is not active.
6027-1854 [E]
Cannot find declustered array arrayName in recovery group recoveryGroupName.
6027-1855 [E]
Cannot find pdisk pdiskName in recovery group recoveryGroupName.
6027-1856 [E]
Vdisk vdiskName not found.
6027-1857 [E]
A recovery group must contain between number and number pdisks.
6027-1858 [E]
Cannot create declustered array arrayName; there can be at most number declustered arrays in a recovery group.
6027-1859 [E]
Sector size of pdisk pdiskName is invalid.
6027-1860 [E]
Pdisk pdiskName must have a capacity of at least number bytes.
6027-1861 [W]
Size of pdisk pdiskName is too large for declustered array arrayName. Only number of number bytes of that capacity will be used.
6027-1862 [E]
Cannot add pdisk pdiskName to declustered array arrayName; there can be at most number pdisks in a declustered array.
6027-1863 [E]
Pdisk sizes within a declustered array cannot vary by more than number.
6027-1864 [E]
[E] At least one declustered array must contain number + vdisk configuration data spares or more pdisks and be eligible to hold vdisk configuration data.
6027-1866 [E]
Disk descriptor for diskName refers to an existing NSD.
6027-1867 [E]
Disk descriptor for diskName refers to an existing pdisk.
6027-1869 [E]
Error updating the recovery group descriptor.
6027-1870 [E]
Recovery group name name is already in use.
6027-1871 [E]
There is only enough free space to allocate number spare(s) in declustered array arrayName.
6027-1872 [E]
Recovery group still contains vdisks.
6027-1873 [E]
Pdisk creation failed for pdisk pdiskName: err=errorNum.
6027-1874 [E]
Error adding pdisk to a recovery group.
6027-1875 [E]
Cannot delete the only declustered array.
6027-1876 [E]
Cannot remove declustered array arrayName because it is the only remaining declustered array with at least number pdisks eligible to hold vdisk configuration data.
6027-1877 [E]
Cannot remove declustered array arrayName because the array still contains vdisks.
6027-1878 [E]
Cannot remove pdisk pdiskName because it is the last remaining pdisk in declustered array arrayName. Remove the declustered array instead.
6027-1879 [E]
Cannot remove pdisk pdiskName because arrayName is the only remaining declustered array with at least number pdisks.
6027-1880 [E]
Cannot remove pdisk pdiskName because the number of pdisks in declustered array arrayName would fall below the code width of one or more of its vdisks.
6027-1881 [E]
Cannot remove pdisk pdiskName because of insufficient free space in declustered array arrayName.
6027-1882 [E]
Cannot remove pdisk pdiskName; unable to drain the data from the pdisk.
6027-1883 [E]
Pdisk pdiskName deletion failed: process interrupted.
6027-1884 [E]
Missing or invalid vdisk name.
6027-1885 [E]
Vdisk block size must be a power of 2.
6027-1886 [E]
Vdisk block size cannot exceed maxBlockSize (number).
6027-1887 [E]
Vdisk block size must be between number and number for the specified code.
6027-1888 [E]
Recovery group already contains number vdisks.
6027-1889 [E]
Vdisk name vdiskName is already in use.
6027-1890 [E]
A recovery group may only contain one log home vdisk.
6027-1891 [E]
Cannot create vdisk before the log home vdisk is created.
6027-1892 [E]
Log vdisks must use replication.
6027-1893 [E]
The declustered array must contain at least as many non-spare pdisks as the width of the code.
6027-1894 [E]
There is not enough space in the declustered array to create additional vdisks.
6027-1895 [E]
Unable to create vdisk vdiskName because there are too many failed pdisks in declustered array declusteredArrayName.
6027-1896 [E]
Insufficient memory for vdisk metadata.
6027-1897 [E]
Error formatting vdisk.
6027-1898 [E]
The log home vdisk cannot be destroyed if there are other vdisks.
6027-1899 [E]
Vdisk vdiskName is still in use.
6027-3000 [E]
No disk enclosures were found on the target node.
6027-3001 [E]
Location of pdisk pdiskName of recovery group recoveryGroupName is not known.
6027-3002 [E]
Disk location code locationCode is not known.
6027-3003 [E]
Disk location code locationCode was specified more than once.
6027-3004 [E]
Disk location codes locationCode and locationCode are not in the same disk carrier.
6027-3005 [W]
Pdisk in location locationCode is controlled by recovery group recoveryGroupName.
6027-3006 [W]
Pdisk in location locationCode is controlled by recovery group id idNumber.
6027-3007 [E]
Carrier contains pdisks from more than one recovery group.
6027-3008 [E]
Incorrect recovery group given for location.
6027-3009 [E]
Pdisk pdiskName of recovery group recoveryGroupName is not currently scheduled for replacement.
6027-3010 [E]
Command interrupted.
6027-3011 [W]
Disk location locationCode failed to power off.
6027-3012 [E]
Cannot find a pdisk in location locationCode.
6027-3013 [W]
Disk location locationCode failed to power on.
6027-3014 [E]
Pdisk pdiskName of recovery group recoveryGroupName was expected to be replaced with a new disk; instead, it was moved from location locationCode to location locationCode.
6027-3015 [E]
Pdisk pdiskName of recovery group recoveryGroupName in location locationCode cannot be used as a replacement for pdisk pdiskName of recovery group recoveryGroupName.
6027-3016 [E]
Replacement disk in location locationCode has an incorrect type fruCode; expected type code is fruCode.
6027-3017 [E]
Error formatting replacement disk diskName.
6027-3018 [E]
A replacement for pdisk pdiskName of recovery group recoveryGroupName was not found in location locationCode.
6027-3019 [E]
Pdisk pdiskName of recovery group recoveryGroupName in location locationCode was not replaced.
6027-3020 [E]
Invalid state change, stateChangeName, for pdisk pdiskName.
6027-3021 [E]
Unable to change identify state to identifyState for pdisk pdiskName: err=errorNum.
6027-3022 [E]
Unable to create vdisk layout.
6027-3023 [E]
Error initializing vdisk.
6027-3024 [E]
Error retrieving recovery group recoveryGroupName event log.
6027-3025 [E]
Device deviceName does not exist or is not active on this node.
6027-3026 [E]
Recovery group recoveryGroupName does not have an active log home vdisk.
6027-3027 [E]
Cannot configure NSD-RAID services on this node.
6027-3028 [E]
There is not enough space in declustered array declusteredArrayName for the requested vdisk size. The maximum possible size for this vdisk is size.
6027-3029 [E]
There must be at least number non-spare pdisks in declustered array declusteredArrayName to avoid falling below the code width of vdisk vdiskName.
6027-3030 [E]
There must be at least number non-spare pdisks in declustered array declusteredArrayName for configuration data replicas.
6027-3031 [E]
There is not enough available configuration data space in declustered array declusteredArrayName to complete this operation.
6027-3032 [E]
Temporarily unable to create vdisk vdiskName because more time is required to rebalance the available space in declustered array declusteredArrayName.
6027-3034 [E]
The input pdisk name (pdiskName) did not match the pdisk name found on disk (pdiskName).
6027-3035 [A]
Cannot configure NSD-RAID services. maxblocksize must be at least value.
6027-3036 [E]
Partition size must be a power of 2.
6027-3037 [E]
Partition size must be between number and number.
6027-3038 [E]
AU log too small; must be at least number bytes.
6027-3039 [E]
A vdisk with disk usage vdiskLogTip must be the first vdisk created in a recovery group.
6027-3040 [E]
Declustered array configuration data does not fit.
6027-3041 [E]
Declustered array attributes cannot be changed.
6027-3042 [E]
The log tip vdisk cannot be destroyed if there are other vdisks.
6027-3043 [E]
Log vdisks cannot have multiple use specifications.
6027-3044 [E]
Unable to determine resource requirements for all the recovery groups served by node value: to override this check reissue the command with the -v no flag.
6027-3045 [W]
Buffer request exceeds the non-stealable buffer limit. Check the configuration attributes of the recovery group servers: pagepool, nsdRAIDBufferPoolSizePct, nsdRAIDNonStealableBufPct.
6027-3046 [E]
The nonStealable buffer limit may be too low on server serverName or the pagepool is too small. Check the configuration attributes of the recovery group servers: pagepool, nsdRAIDBufferPoolSizePct, nsdRAIDNonStealableBufPct.
6027-3047 [E]
Location of pdisk pdiskName is not known.
6027-3048 [E]
Pdisk pdiskName is not currently scheduled for replacement.
6027-3049 [E]
The minimum size for vdisk vdiskName is number.
6027-3050 [E]
There are already number suspended pdisks in declustered array arrayName. You must resume pdisks in the array before suspending more.
6027-3051 [E]
Checksum granularity must be number or number.
6027-3052 [E]
Checksum granularity cannot be specified for log vdisks.
6027-3053 [E]
Vdisk block size must be between number and number for the specified code when checksum granularity number is used.
6027-3054 [W]
Disk in location locationCode failed to come online.
6027-3055 [E]
The fault tolerance of the code cannot be greater than the fault tolerance of the internal configuration data.
6027-3056 [E]
Long and short term event log size and fast write log percentage are only applicable to log home vdisk.
6027-3057 [E]
Disk enclosure is no longer reporting information on location locationCode.
6027-3058 [A]
GSS license failure - IBM Storage Scale RAID services will not be configured on this node.
6027-3059 [E]
The serviceDrain state is only permitted when all nodes in the cluster are running daemon version version or higher.
6027-3060 [E]
Block sizes of all log vdisks must be the same.
6027-3061 [E]
Cannot delete path pathName because there would be no other working paths to pdisk pdiskName of RG recoveryGroupName.
6027-3062 [E]
Recovery group version version is not compatible with the current recovery group version.
6027-3063 [E]
Unknown recovery group version version.
6027-3064 [I]
Allowable recovery group versions are:
6027-3065 [E]
The maximum size of a log tip vdisk is size.
6027-3066 [E]
A recovery group may only contain one log tip vdisk.
6027-3067 [E]
Log tip backup vdisks not supported by this recovery group version.
6027-3068 [E]
The sizes of the log tip vdisk and the log tip backup vdisk must be the same.
6027-3069 [E]
Log vdisks cannot use code codeName.
6027-3070 [E]
Log vdisk vdiskName cannot appear in the same declustered array as log vdisk vdiskName.
6027-3071 [E]
Device not found: deviceName.
6027-3072 [E]
Invalid device name: deviceName.
6027-3073 [E]
Error formatting pdisk pdiskName on device diskName.
6027-3074 [E]
Node nodeName not found in cluster configuration.
6027-3075 [E]
The --servers list must contain the current node, nodeName.
6027-3076 [E]
Remote pdisks are not supported by this recovery group version.
6027-3077 [E]
There must be at least number pdisks in recovery group recoveryGroupName for configuration data replicas.
6027-3078 [E]
Replacement threshold for declustered array declusteredArrayName of recovery group recoveryGroupName cannot exceed number.
6027-3079 [E]
Number of spares for declustered array declusteredArrayName of recovery group recoveryGroupName cannot exceed number.
6027-3080 [E]
Cannot remove pdisk pdiskName because declustered array declusteredArrayName would have fewer disks than its replacement threshold.
6027-3084 [E]
VCD spares feature must be enabled before being changed. Upgrade recovery group version to at least version to enable it.
6027-3085 [E]
The number of VCD spares must be greater than or equal to the number of spares in declustered array declusteredArrayName.
6027-3086 [E]
There is only enough free space to allocate n VCD spare(s) in declustered array declusteredArrayName.
6027-3087 [E]
Specifying Pdisk rotation rate not supported by this recovery group version.
6027-3088 [E]
Specifying Pdisk expected number of paths not supported by this recovery group version.
6027-3089 [E]
Pdisk pdiskName location locationCode is already in use.
6027-3090 [E]
Enclosure control command failed for pdisk pdiskName of RG recoveryGroupName in location locationCode: err errorNum. Examine mmfs log for tsctlenclslot, tsonosdisk and tsoffosdisk errors.
6027-3091 [W]
A command to control the disk enclosure failed with error code errorNum. As a result, enclosure indicator lights may not have changed to the correct states. Examine the mmfs log on nodes attached to the disk enclosure for messages from the tsctlenclslot, tsonosdisk, and tsoffosdisk commands for more detailed information.
6027-3092 [I]
Recovery group recoveryGroupName assignment delay delaySeconds seconds for safe recovery.
6027-3093 [E]
Checksum granularity must be number or number for log vdisks.
6027-3094 [E]
Due to the attributes of other log vdisks, the checksum granularity of this vdisk must be number.
6027-3095 [E]
The specified declustered array name (declusteredArrayName) for the new pdisk pdiskName must be declusteredArrayName.
6027-3096 [E]
Internal error encountered in NSD-RAID command: err=errorNum.
6027-3097 [E]
Missing or invalid pdisk name (pdiskName).
6027-3098 [E]
Pdisk name pdiskName is already in use in recovery group recoveryGroupName.
6027-3099 [E]
Device with path(s) pathName is specified for both new pdisks pdiskName and pdiskName.
6027-3800 [E]
Device with path(s) pathName for new pdisk pdiskName is already in use by pdisk pdiskName of recovery group recoveryGroupName.
6027-3801 [E]
[E] The checksum granularity for log vdisks in declustered array declusteredArrayName of RG recoveryGroupName must be at least number bytes.
6027-3802 [E]
[E] Pdisk pdiskName of RG recoveryGroupName has a logical block size of number bytes; the maximum logical block size for pdisks in declustered array declusteredArrayName cannot exceed the log checksum granularity of number bytes.
6027-3803 [E]
[E] NSD format version 2 feature must be enabled before being changed. Upgrade recovery group version to at least recoveryGroupVersion to enable it.
6027-3804 [W]
Skipping upgrade of pdisk pdiskName because the disk capacity of number bytes is less than the number bytes required for the new format.
6027-3805 [E]
NSD format version 2 feature is not supported by the current recovery group version. A recovery group version of at least rgVersion is required for this feature.
6027-3806 [E]
The device given for pdisk pdiskName has a logical block size of logicalBlockSize bytes, which is not supported by the recovery group version.
6027-3807 [E]
NSD version 1 specified for pdisk pdiskName requires a disk with a logical block size of 512 bytes. The supplied disk has a block size of logicalBlockSize bytes. For this disk, you must use at least NSD version 2.
6027-3808 [E]
Pdisk pdiskName must have a capacity of at least number bytes for NSD version 2.
6027-3809 [I]
Pdisk pdiskName can be added as NSD version 1.
6027-3810 [W]
[W] Skipping the upgrade of pdisk pdiskName because no I/O paths are currently available.
6027-3811 [E]
Unable to action vdisk MDI.
6027-3812 [I]
Log group logGroupName assignment delay delaySeconds seconds for safe recovery.
6027-3813 [A]
Recovery group recoveryGroupName could not be served by node nodeName.
6027-3814 [A]
Log group logGroupName could not be served by node nodeName.
6027-3815 [E]
Erasure code not supported by this recovery group version.
6027-3816 [E]
Invalid declustered array name (declusteredArrayName).
6027-3817 [E]
Invalid log group name (logGroupName).
6027-3818 [E]
Cannot create log group logGroupName; there can be at most number log groups in a recovery group.
6027-3819 [I]
Recovery group recoveryGroupName delay delaySeconds seconds for assignment.
6027-3820 [E]
Specifying canHoldVCD not supported by this recovery group version.
6027-3821 [E]
Cannot set canHoldVCD=yes for small declustered arrays.
6027-3822 [I]
Recovery group recoveryGroupName working index delay delaySeconds seconds for safe recovery.
6027-3823 [E]
Unknown node nodeName in the recovery group configuration.
6027-3824 [E]
The defined server serverName for recovery group recoveryGroupName could not be resolved.
6027-3825 [E]
The defined server serverName for node class nodeClassName could not be resolved.
6027-3826 [A]
Error reading volume identifier for recovery group recoveryGroupName from configuration file.
6027-3827 [A]
Error reading volume identifier for vdisk vdiskName from configuration file.
6027-3828 [E]
Vdisk vdiskName could not be associated with its recovery group recoveryGroupName and will be ignored.
6027-3829 [E]
A server list must be provided.
6027-3830 [E]
Too many servers specified.
6027-3831 [E]
A vdisk name must be provided.
6027-3832 [E]
A recovery group name must be provided.
6027-3833 [E]
Recovery group recoveryGroupName does not have an active root log group.
6027-3836 [I]
Cannot retrieve MSID for device: devFileName.
6027-3837 [E]
Error creating worker vdisk.
6027-3838 [E]
Unable to write new vdisk MDI.
6027-3839 [E]
Unable to write update vdisk MDI.
6027-3840 [E]
Unable to delete worker vdisk vdiskName err=errorNum.
6027-3841 [E]
Unable to create new vdisk MDI.
6027-3843 [E]
Error returned from node nodeName when preparing new pdisk pdiskName of RG recoveryGroupName for use: err errorNum
6027-3844 [E]
Unable to prepare new pdisk pdiskName of RG recoveryGroupName for use: exit status exitStatus.
6027-3845 [E]
Unrecognized pdisk state: pdiskState.
6027-3846 [E]
Pdisk state change pdiskState is not permitted.
6027-3847 [E]
[E] The serviceDrain state feature must be enabled to use this command. Upgrade the recovery group version to at least version to enable it.
6027-3848 [E]
The simulated dead and failing state feature must be enabled to use this command. Upgrade the recovery group version to at least version to enable it.
6027-3849 [E]
The pdisk pdiskName of recovery group recoveryGroupName could not be revived. Pdisk state is pdiskState.
6027-3850 [E]
Location locationCode contains multiple disk devices. You cannot use this command to replace disks in the specific location.
6027-3851 [E]
Command interrupted by recovery group recoveryGroupName failover.
6027-3852 [A]
Cannot configure NSD-RAID services. The nsdRAIDBufferPoolSizePct attribute of the pagepool must result in at least nsdRAIDMasterBufferPoolSize (number) bytes + 128 MiB of space.
6027-3853 [W]
Buffer request (name) exceeds the master reserved buffer limit (number). Check the configuration attributes of the recovery group servers: nsdRAIDMasterBufferPoolSize.
6027-3854 [E]
Recovery group configuration manager takeover failed: scheduled scheduled stopping stopping
6027-3855 [E]
rgcmRefreshConfig error. Duplicated NID nsdID (vdiskName) found in recoveryGroupName.
6027-3856 [E]
Recovery group configuration manager takeover failed: err errorNum
6027-3857 [E]
Log group logGroupName of recovery group recoveryGroupName could not be served.
6027-3858 [E]
Recovery group configuration manager failed to start. err errorNum
6027-3859 [E]
Trim to device not supported by this recovery group version. Upgrade the recovery group version to at least version to enable it.
6027-3860 [E]
Recovery group descriptor for PDisk pdiskName of recovery group recoveryGroupName could not be written because volatile write caching is enabled on this drive.
6027-3861 [E]
Recovery group descriptor for PDisk pdiskName of recovery group recoveryGroupName not be written err=errNum.
6027-3862 [E]
Trim to declustered array arrayName of recovery group recoveryGroupName is not supported for hardware type hardwareType
6027-3863 [E]
Recovery group recoveryGroupName stops serving after exceeding retry limit nsdRAIDMaxRecoveryRetries.
6027-3864 [E]
[E] Slot location is missing from pdisk pdiskName device(s) deviceName of declustered array arrayName in recovery group recoveryGroupName with hardware type hardwareType.
6027-3865 [E]
[E] nFailures empty slot locationstring found in recovery group recoveryGroupName. Make sure \ disk drives and slot location mapping are configured properly.
6027-3866 [E]
Log group logGroupName of recovery group recoveryGroupName not reachable. Verify recovery group health and try again.
6027-3867 [E]
Log vdisks cannot be exported as NVMe-oF target.
6027-3868 [E]
Log group affinity node feature must be enabled before creating a new log group with affinityNode option. Upgrade recovery group version to at least rgVersion to enable it.
6027-3869 [E]
Log group affinityNode option can only be used for creating log vdisk of a non-root log group.
6027-3870 [E]
Specifying daHospitalParmeters is supported starting in recovery group version rgVersion.
6027-3871 [E]
Declustered array bit error rate settings are supported starting in recovery group version rgVersion.
6027-3872 [E]
Invalid format for hospital stanza parameters stanzaParameters for declustered array declusteredArrayName of RG recoveryGroupName.
6027-3873 [E]
Bit error rate settings have been permanently disabled for declustered array declusteredArrayName of RG recoveryGroupName.
6027-3874 [E]
Cannot remove declustered array arrayName because it is the only remaining declustered array designated at recovery group creation time with at least number pdisks eligible to hold vdisk configuration data.
6027-3875 [E]
Pdisk size diskSize is larger than diskSize.
6027-3876 [E]
The attempt to start IBM Spectrum Scale RAID partition trim has failed for pdisk pdiskName of rg recoveryGroupName because of insufficient memory.
6027-3877 [E]
Pdisks in declustered array declusteredArrayName of recovery group recoveryGroupName do not support compression.
6027-3878 [E]
Failed to retrieve physical capacity of pdisks in declustered array declusteredArrayName of recovery group recoveryGroupName.
6027-3879 [E]
Space monitoring should be enabled for declustered array declusteredArrayName of recovery group recoveryGroupName.
6027-3880 [E]
At least one declustered array must contain pdisks pdisks and vdisk configuration data spares or more disks, and the array must be eligible store the vdisk configuration data.
6027-3881 [E]
The attempt to start IBM Storage Scale RAID partition trim has failed for pdisk pdiskName of rg recoveryGroupName because of insufficient memory.
6027-3882 [E]
Adding pdisk name pdiskName to recovery group recoveryGroupName as a replacement fails because that pdisk does not already exist in the recovery group.
6027-3883 [E]
Error returned from node nodeName when preparing and validating new pdisk pdiskname of RG recoveryGroupName for use: errorNum

Parent topic: Messages