Client node tuning recommendations
IBM Spectrum® Scale node configuration is optimized for running IBM Spectrum Scale RAID functions.
ESS cluster node configuration is optimized for running IBM Spectrum Scale RAID functions. Protocols, other gateways, or
any other non-ESS services must not be run on ESS management server nodes or I/O server nodes. In a
cluster with high IO load, avoid using ESS nodes as cluster manager or filesystem manager. For
optimal performance the NSD client nodes accessing ESS nodes should be properly configured. ESS
ships with gssClientConfig.sh script located in
/usr/lpp/mmfs/samples/gss/ directory. This script can be used to configure the
client as
follows:
/usr/lpp/mmfs/samples/gss/gssClientConfig.sh <Comma Separated list of
client nodes or nodeclass>
You can run the following to see configuration parameter settings without setting
them:
/usr/lpp/mmfs/samples/gss/gssClientConfig.sh -D
After running this script, restart GPFS on the affected nodes for the optimized configuration settings to take effect.
Important: Do not run
gssClientConfig.sh unless you fully understand the impact of each setting on the
customer environment. Make use of the
-D
option to decide if all or some of the
settings might be applied. Then, individually update each client node settings as required.