Message reference
This reference lists and describes each message that is generated by the IBM® Storage Protect Operations Center. Messages are listed in ascending
alphanumeric order.
ANRG0089E The following server command was issued, and the server requests a confirmation reply for this command: command ANRG0090E The server does not recognize the following command: command ANRG0091E The syntax of the following command is not valid: command ANRG0092E An internal error occurred on the IBM Storage Protect server. ANRG0093E The server ran out of memory while processing the request. ANRG0094E At least one of the IBM Storage Protect database logs is full. ANRG0095E The IBM Storage Protect server database is full. ANRG0096E The IBM Storage Protect server has no more storage space. ANRG0097E Your administrator ID does not have sufficient authority to complete the specified action. ANRG0098E The IBM Storage Protect server object that you are trying to access does not exist on the server. ANRG0099E The IBM Storage Protect server object that you are trying to access is being used by another session or process. ANRG0100E The IBM Storage Protect server object that you are trying to remove is referenced by another object that is defined to the server. ANRG0101E The IBM Storage Protect server object that you are trying to access or remove is not available. ANRG0102E An I/O error occurred while the IBM Storage Protect server was processing the request. For more information, see the operating system event or error log. ANRG0103E The specified action failed because the transaction cannot be committed on the IBM Storage Protect server. ANRG0104E The specified action failed because of a resource lock conflict. ANRG0105E The specified action failed because of a mode conflict. ANRG0106E The specified action failed because the IBM Storage Protect server cannot start a new thread. ANRG0107E The IBM Storage Protect server is not licensed to complete the specified action. If a license was purchased, register the license using the command-line interface. ANRG0108E The specified destination is not valid. Enter a different destination or update the configuration with a valid destination, and try the action again. ANRG0109E The specified input file cannot be opened. Verify the file name and directory permissions before trying the action again. ANRG0110E The specified output file cannot be opened. Verify the file name and directory permissions before trying the action again. ANRG0111E An error occurred in writing to the specified output file. Verify that enough space is available in the file system. For more information, check the operating system event or error log. ANRG0112E The specified administrator is not defined to this IBM Storage Protect server. ANRG0113E The SQL statement cannot be processed. ANRG0114E The action is not supported for the specified object. ANRG0115E The table was not found in the IBM Storage Protect server database. ANRG0116E The specified file space name is not compatible with the file space type. ANRG0117E The specified TCP/IP address is not valid. Verify the address and try the action again. ANRG0118I No objects were found that match the search conditions. ANRG0119E Your administrative ID on this IBM Storage Protect server is locked. ANRG0120E The connection to the IBM Storage Protect server was lost while completing the action. ANRG0121E Your administrator name or password is not valid for the specified IBM Storage Protect server. ANRG0122E Your password expired on the specified IBM Storage Protect server. ANRG0123E The IBM Storage Protect server cannot accept new sessions. ANRG0124E A communication failure occurred while processing the request. Try the action again at a later time. ANRG0126E The administrative API encountered an internal error while processing the request. ANRG0129E The following command contains one or more parameters that are not valid: command ANRG0131E The authority level of the administrator on the specified IBM Storage Protect server cannot be determined. ANRG0133E An object with the name that you specified already exists on the IBM Storage Protect server. Enter a different name. ANRG0134E The version of the specified IBM Storage Protect server is not supported by the Operations Center. ANRG0137E An error has occurred. The specified action cannot be completed. ANRG0140E The IBM Storage Protect server cannot process a command that has more than 1500 characters. The command that you entered exceeds the maximum length. Correct the command, and enter it again. ANRG0160E The Operations Center cannot connect to the specified server. Before trying the action again, verify that the server information was entered correctly, the server is running, and there are no network or firewall issues. ANRG0161E The administrator ID that was used to log in to the Operations Center is locked on the specified server. Unlock the administrator ID or log in with a different ID and try the action again. ANRG0162E The server name that you entered does not match the name that is set for the specified server: server name. Enter the correct server name and try the action again. ANRG0163E The specified server has already been added to the Operations Center. ANRG0164E To use the Operations Center to manage the specified server, you must upgrade the server to IBM Storage Protect version 6.3.4 or later. ANRG0165E The administrator ID that was used to log in to the Operations Center does not have system authority on the specified server. Change the authority level or log in with a different administrator ID and try the action again. ANRG0166E The Operations Center cannot connect to the specified server. Verify that the server is running and that there are no network or firewall issues. Verify that your administrator ID is registered on the specified server with the same password and authority level. You can verify your authority level by using the server console, an administrative client, or a different administrator ID. ANRG0167E The specified server is a storage agent or other IBM Storage Protect resource that cannot be managed by the Operations Center. Verify that the server information was entered correctly. ANRG0168E The server name that is defined on the hub server does not match the name that is set for the specified spoke server: server name. To create a new server definition, issue the DEFINE SERVER command on the hub server. To change the server name, issue the SET SERVERNAME command on the spoke server. ANRG0169E The monitoring administrator ID administrator ID that is used by the Operations Center is locked on the hub server: server name. Do you want to unlock the administrator ID now? ANRG0170E There is not enough free space available in the hub server database. Increase the size of the database on the hub server. ANRG0171E There is not enough free space available in the spoke server database. Increase the size of the database on the spoke server. ANRG0172I Updating numberOfServers spoke servers ANRG0173I Spoke server spokeServerName was updated successfully. ANRG0174W Spoke server spokeServerName was not updated. ANRG0175W numberfailedSpokeServers of numberTotalSpokeServers spoke servers were not updated. Ensure that the spoke servers are running, and that there are no network issues, and try the update again. ANRG0176E The Operations Center cannot connect to the hub server: server name. Click Close to log out of the Operations Center. ANRG0177E The password for the monitoring administrator ID administrator ID expired. The password was updated on the hub server and numberchangedSpokeServers of numberTotalSpokeServers spoke servers. Ensure that the spoke servers are running, and that there are no network issues, and click Update Passwords to try the action again. ANRG0178E The monitoring administrator ID administrator ID is not available on the hub server or its password has changed. The administrator ID that was used to log in to the Operations Center does not have sufficient authority to correct this situation. Log out of the Operations Center and log in with an administrator ID that has system-level authority. ANRG0179E The Secure Sockets Layer (SSL) certificate that is needed to connect to the hub server has expired or was not found in the truststore file. ANRG0180E The Operations Center is configured to use Secure Sockets Layer (SSL), but the Use SSL option was not selected . ANRG0181E The truststore file that should be located in the following directory cannot be found: file path ANRG0182I The password for the monitoring administrator ID administrator ID was changed on the hub server. You do not need to use or manage this password. ANRG0183I The Operations Center changed the monitoring configuration of the hub server to resolve a problem. Spoke server settings were not changed, so you must ensure that any spoke servers are configured correctly. ANRG0202E The JavaScript Object Notation (JSON) that the IBM Storage Protect server is analyzing is not in the correct format. Ensure that the server returns valid JSON. ANRG0203E The IBM Storage Protect server is shutting down. Any transactions that are in progress are rolled back when you restart the server. ANRG0204E Capacity information cannot be shown because the data is invalid. This issue can occur if the system clock is set to a future time. ANRG0205E To create a VMware schedule, at least one client in the policy domain must be configured as the target of a data mover. ANRG0206E The wizard cannot access the target replication server target_server_name. Verify that the server is running and accessible, and that your administrator name and password are valid. ANRG0207E client_name already exists on target replication server target_server_name. Either specify a different client name or clear the Replication check box and enable replication after you add the client. ANRG0208E The policy domain domain_name does not exist on the target replication server target_server_name. The wizard cannot enable replication. ANRG0211E The selected file is not a valid image file. Upload a JPEG, GIF, or PNG file at 60 x 30 pixels. ANRG0212E The Operations Center was unable to establish a WebSocket connection with the browser. Ensure that your browser supports the WebSocket protocol, and that the Operations Center can start a service in your browser. Ensure that the TLS certificate is not expired. ANRG0213E The Operations Center cannot connect to the specified NAS file server to complete this action. Verify that the NAS file server is running and that there are no network or firewall issues. ANRG0214W The connection to the IBM Storage Protect server was not successful because a security certificate is required ANRG0215E The spoke server cannot be running a later version than the hub server. ANRG0216W The Operations Center cannot connect to the following spoke servers by using the administrator ID administrator ID. On these spoke servers, ensure that the administrator ID is not locked and that its password is not expired. spoke server name ANRG0217E The server connections created with the current passcode have expired. You must click logoff and then log in.