Connecting to a Fibre Channel Port
The Fibre Channel ports are compatible with FC LC-type fiber-optic SFP transceivers and cables (see the Removing and Installing Cables into SFP Transceivers section). You can use these ports to connect to the SAN or for in-band management. For information about configuring the switch for in-band management, see the IBM NX-OS version 8.4(1) Configuration Guide.
Each transceiver must match the transceiver at the other end of the cable, and the cable must not exceed the stipulated cable length for reliable communications. SFP transceivers can be ordered either separately or with the IBM SAN32C-6 switch.
Class 1 laser product.
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments.
Wear an ESD wrist strap connected to the chassis when handling transceivers. Keep optical connectors covered when not in use, and do not touch connector ends. The fiber-optic connectors must be free of dust, oil, and other contaminants.