tempShow

Use the tempShow command to display temperature readings of blade temperature sensors. The command displays the following information:

  • Sensor ID (an index number)
  • Slot number
  • Sensor index (when command issued with the --detail option)
  • Sensor state (OK or absent)
  • Temperature in both Centigrade and Fahrenheit
The following is an example of tempShow output:
PS-X8-4:FID128:admin> tempshow
Sensor ID|Slot   |Sensor Index|State          |Centigrade     |Fahrenheit   |
-----------------------------------------------------------------------------
1        |0      |0           |OK             |26             |78           |
(output truncated)

The following observations can be made about this command output:

  • The absent state reflects that the blade slot is empty.
  • The sensor index is mainly for support use.
  • Multiple sensors are commonly averaged to determine thresholds used for managing fan speeds or for determining a high temperature condition that may require that the blade be shut off.