switchShow
The
switchShow command can be especially helpful in monitoring the health of the
device. This command displays status, identification, and configuration information on the chassis
and installed blades and ports. The following example shows output from this command.Note: The
following
switchShow output has been truncated to reduce duplicate
information.chassisX8-4:admin> switchshow
switchName: x8-4-62-140
switchType: 202.0
switchState: Offline
switchMode: Native
switchRole: Disabled
switchDomain: 1 (unconfirmed)
switchId: fffc01
switchWwn: 10:00:10:ba:b0:1e:10:40
zoning: OFF
switchBeacon: OFF
FC Router: OFF
HIF Mode: OFF
Allow XISL Use: OFF
LS Attributes: [FID: 128, Base Switch: No, Default Switch: Yes, Ficon Switch: No, IP Storage Switch: No,
Address Mode 0]
==========================================================================
Index Slot Port ICL Address Media Speed State Proto
Sl/Cage/Ch
==========================================================================
17 1 17 -/-/- 011100 -- N128 No_Module FC Disabled
18 1 18 -/-/- 011200 -- N128 No_Module FC Disabled
19 1 19 -/-/- 011300 -- N128 No_Module FC Disabled
20 1 20 -/-/- 011400 -- N128 No_Module FC Disabled
21 1 21 -/-/- 011500 -- N128 No_Module FC Disabled
22 1 22 -/-/- 011600 -- N128 No_Module FC Disabled
23 1 23 -/-/- 011700 -- N128 No_Module FC Disabled
(output truncated)