Flush-Front Mounting

Observe the following notes when performing this procedure:
  • The device must be turned off and disconnected from the fabric during this procedure.
  • The illustrations in this document show a 1U device, but the instructions are the same for a 2U device.
  • The illustrations for this procedure show a two-post rack with narrow posts (3- to 5-inch) as an example.
  • The illustrations in the rack installation procedures are for reference only and may not show the actual device.
CAUTION:
Use the screws specified in the procedure. Using longer screws can damage the device.

Complete the following tasks to install the device in the rack: