Verifying Correct Operation

About this task

Perform the following steps to verify correct operation of the device.

Procedure

  1. Check the LEDs to verify that all components are functional.
  2. Verify the correct operation of the device by entering the following commands from the workstation.
    Command Description
    psShow Displays the power supply status and information.
    fanShow Displays the fan status and information.
    switchShow Displays the switch status and information.
    tempShow Displays the temperature status and information.
    historyShow Displays the device history.
    errDump Displays any errors.

    The switchShow command provides the following information about the device and ports status. 

    ras210:admin> switchshow
witchName:	ras210
switchType:	178.0
switchState:	Online   
switchMode:	Native
switchRole:	Subordinate
switchDomain:	210
switchId:	fffec2
switchWwn:	10:00:44:18:71:47:ff:e6
zoning:		ON (WB_RAS159_32G_LSAN)
switchBeacon:	OFF
FC Router:	OFF
HIF Mode:	OFF
LS Attribute:	[Inherited FID: 128]

 Index Port Address  Media Speed   State       Proto
==================================================
   0   0   010000   id    N16	  Online      FC  F-Port  10:00:8c:7c:ff:5f:42:00 
   1   1   010100   id    N16	  Online      FC  F-Port  10:00:8c:7c:ff:5f:42:01 
   2   2   010200   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
   3   3   010300   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
   4   4   010400   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
   5   5   010500   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
   6   6   010600   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
   7   7   010700   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
   8   8   010800   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
   9   9   010900   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
  10  10   010a00   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
  11  11   010b00   --    N32     No_Module   FC  (POD license not assigned or reserved yet)
  12  12   010c00   --    --      Offline     VE
  13  13   010d00   --    --      Offline     VE
  14  14   010e00   --    --      Offline     VE
  15  15   010f00   --    --      Offline     VE
      ge0           id    1G      Offline     FCIP  Copper  Disabled (Unsupported blade mode)
      ge1           id    1G      Offline     FCIP  Copper  Disabled (Unsupported blade mode)
      ge2           id    1G      No_Light    FCIP
      ge3           id    1G      No_Light    FCIP
      ge4           id    1G      No_Light    FCIP
      ge5           id    1G      No_Light    FCIP
      ge6           id    1G      No_Sync     FCIP
      ge7           id    1G      No_Sync     FCIP

<Output truncated>