Complete the following steps to attach the extension
brackets to the device. You can use medium and long extension brackets
for this task.
Procedure
Select the proper length bracket extension for your rack depth.
Position the right bracket extension along the side of the device as shown in Figure 1.
Insert four 8-32 x 5/16-in. flathead screws through the vertically aligned holes in the bracket
extension and then into the holes on the side of the device. Use the upper and lower screw holes,
leaving the center holes empty.
Repeat Steps 2 and 3 to attach the left bracket extension to
the left side of the device.
Tighten all 8-32 x 5/16-in. screws to a torque of
15 in-lb (17 cm-kg).
Figure 1. Attaching the Bracket Extensions to the Device
