Installing the Switch on the Rack-Mount Support Brackets

About this task

This section provides general instructions for installing the switch on top of the rack-mount support brackets. For detailed installation instructions, see the Installing the switch on the Shelf Brackets.
  • Installing the Switch on the Rack-Mount Support Brackets
  • Installing the Switch on the Shelf Brackets
Warning: This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Note: Note Before you install, operate, or service the system, see the IBM Systems Environmental Notices and User Guide, Z125-5823 for important safety information.
To install the switch on top of the rack-mount support brackets, follow these steps.
  1. Verify that the rack-mount support brackets are level and securely attached to the rack-mounting rails, the support rack-mount support brace is securely attached to the brackets, and the rack is stabilized.
  2. Slide a mechanical lift under the switch and lift the switch up onto the rack-mount support brackets, ensuring it is squarely positioned.
  3. Attach the switch to the rack-mounting rails. See Installing the Switch.
CAUTION:
We recommend grounding the chassis, even if the rack is already grounded. There is a grounding pad with two threaded M4 holes on the chassis for attaching a grounding lug.