Hyper-V messages
GVM5900E The operation failed with return code return code
GVM5901E An internal error occurred: type of error
GVM5902E A connection with the IBM Storage Protect server could not be established.
Explanation
The server might not be running.
User response
Check the network connection with the server machine. Verify that the server is running and try to log in again.
GVM5903W Are you certain that you want to delete this data?
Explanation
You cannot recover the data after it is deleted. Ensure that the data is not needed before you delete it.
User response
Click OK to delete the data or click Cancel to cancel this action.
GVM5904W The connection with the IBM Storage Protect server has timed out.
Explanation
Possible causes include a long-running operation, a problem on the server, or a communications problem.
User response
If the operation is long-running, the operation might be complete or it might soon be complete. Before trying the operation again, determine if the expected result occurred. Check the activity log of the IBM Storage Protect server for errors related to the operation. Using a SSL port without selecting SSL can cause this error.
GVM5905W The VM VM name exists, are you going to over-write it?
GVM5906W The VM VM name is running, make sure the system is powered down, then hit OK to continue.
GVM5907I A server connection with the name server name has been successfully created. Click OK to continue.
GVM5908W There is no IBM Storage Protect server definition found.
Explanation
A connection for a IBM Storage Protect server must be defined before any server operations or queries are performed.
User response
- Click the Configuration tab.
- Click the Edit Configuration Settings action link.
- Click the IBM Storage Protect Server Credentials tab.
GVM5909I The VM VM name is spanned into multiple datastores. It can only be restored to its original location.
GVM5910E An error occurred while writing to the server's database file, tsmserver.props
Explanation
The server definition could not be written to the tsmserver.props file.
User response
The file must reside in the install directory of the Data Protection for Virtual Environments. Before you try the action again, verify that the file exists and that the file is not write protected.
GVM5911E A connection with the vCenter server could not be established.
Explanation
The server might not be running.
User response
This might indicate a network problem. Ensure that the server is running and the machine is accessible. Try the action again.
GVM5912I A connection with the vCenter server has been established.
GVM5913E The VMCLI inquire configuration command failed, the following messages describe the error.
Explanation
The Derby database might not be running.
User response
Correct the problem. Try the action again.
GVM5914I The VMCLI inquire configuration command completed successfully.
GVM5915E Failed to determine which product or products are installed.
Explanation
See message.
User response
Correct the problem. Try the action again.
GVM5916I Successfully determined which product or products are installed.
GVM5917E Multiple restore points have been selected, but they are not located in the same datacenter.
Explanation
Selecting restore points from different datacenters is not permitted. The restore points must all be located in the same datacenter.
User response
Select the restore points from the same datacenter or select just a single restore point.
GVM5918E Multiple restore points have been selected, but they are not from the same backup.
Explanation
Selecting restore points from different backups is not permitted. The restore points must all be located in the same backup.
User response
For restores from IBM Storage Snapshot, all restore points must come from the same backup. You cannot restore multiple VMs that come from of different backups.
GVM5919E A key configuration file is missing: vmcliConfiguration.xml.
Explanation
The file vmcliConfiguration.xml is required for the GUI to operate, but has not been found during GUI session startup. This is an unusual problem, it may be due to an install issue or manual editing of the file.
User response
Make sure the file is located in the correct directory, has correct access permissions, and has valid syntax for its content. Retry accessing the GUI.
GVM5920E Invalid mode tag in file vmcliConfiguration.xml.
Explanation
The xml tag mode in file vmcliConfiguration.xml is required for the GUI to operate, but is missing or has an incorrect value. This may be due to an install issue or manual editing of the file.
User response
Make sure the tag is specified with a valid value. Retry accessing the GUI.
GVM5921E Invalid enable_direct_start tag in file vmcliConfiguration.xml.
Explanation
The xml tag enable_direct_start in file vmcliConfiguration.xml is required for the GUI to operate, but is missing or has an incorrect value. This may be due to an install issue or manual editing of the file.
User response
Make sure the tag is specified with a valid value. Retry accessing the GUI.
GVM5922E Invalid URL tag for the specified mode tag in file vmcliConfiguration.xml.
Explanation
In file vmcliConfiguration.xml, the URL tag corresponding to the specified mode tag is required for the GUI to operate, but is missing or has an incorrect value. This may be due to an install issue or manual editing of the file.
User response
Make sure the correct URL tag is specified with a valid value for the specified mode. Retry accessing the GUI.
GVM5923E Invalid VMCLIPath tag in file vmcliConfiguration.xml.
Explanation
The xml tag VMCLIPath in file vmcliConfiguration.xml is required for the GUI to operate, but is missing or has an incorrect value. This may be due to an install issue or manual editing of the file.
User response
Make sure the tag is specified with a valid value. Retry accessing the GUI.
GVM5924E Invalid interruptDelay tag in file vmcliConfiguration.xml.
Explanation
The xml tag interruptDelay in file vmcliConfiguration.xml is required for the GUI to operate, but is missing or has an incorrect value. This may be due to an install issue or manual editing of the file.
User response
Make sure the tag is specified with a valid value. Retry accessing the GUI.
GVM5925E The VM name entered VM name conflicts with an existing VM. Please enter a different name.
GVM5926E An error occurred while processing the request to the Web server. If this error persists, check the network connection with the Web server and verify that the Web server is running.
Detail: exception
exception message
GVM5927E A request to the server took too long to complete. If this error persists, check the network connection with the Web server and verify that the Web server is running.
GVM5928E An error occurred while processing the response from the Web server.
Detail: error
GVM5929E An error occurred while making the Web server request. If this error persists, check the network connection with the Web server and verify that the Web server is running.
Error: message
GVM5930E No matching device class found. Please return to source page and reselect.
GVM5931E No matching proxy node found. Please return to source page and reselect.
GVM5932E No proxy ESX hosts available.
GVM5933I Password set successfully.
GVM5934E Set password failed.
Error: message
Explanation
The password may be incorrect or the server is not running.
User response
Verify the password is correct then try the action again. Or check the network connection with the server machine and verify that the server is running then try the action again.
GVM5935E
Get managed domain failed.
Error: message
GVM5936E Multiple restore points have been selected, but they are not the same backup type.
Explanation
Selecting restore points of different types is not allowed. The restore points must all be located on either a IBM Storage Protect server or in the IBM Storage Snapshot repository.
User response
Select the same type of restore points or select just a single restore point.
GVM5937E Backup ID is null.
Explanation
An internal error occurred.
User response
Refresh the table and perform the action again.
GVM5938E Task ID is null.
Explanation
An internal error occurred.
User response
Refresh the table and perform the action again.
GVM5939E Could not open a pop-up window.
Explanation
An internal error occurred.
User response
Try the action again.
GVM5940E Virtual machine name is null.
Explanation
An internal error occurred.
User response
Refresh the table and perform the action again.
GVM5941E Datastore does not exist.
Explanation
An internal error occurred.
User response
Refresh the table and perform the action again.
GVM5942I No selection was made, the whole virtual machine will be attached.
Explanation
No selection was made.
User response
Continue with the action or cancel the action.
GVM5943I Domain set successfully.
GVM5944E
Set domain failed.
Error: message
Explanation
The server might not be running.
The permissions on the file directory may be incorrect.
User response
Check the network connection with the server machine. Verify that the server is running and try the action again.
Check the permissions of the directory indicated in SystemErr.log if error indicates incorrect permissions.
GVM5945E
The schedule requires use of the following datacenters that are not in the active domain.
Datacenters:
list
Action: This schedule may not be updated, instead either update the domain construct to include the datacenters, or create a new schedule without dependence on these datacenters.
Detail: The schedule definition is as follows:
Schedule Summary summary
GVM5946E The schedule requires use of the following datacenters that are not known to the system.
Datacenters: list
Action: This schedule may not be updated, instead create a new schedule without dependence on these datacenters.
Detail: The schedule definition is as follows:
Schedule Summary: summary
GVM5947E
The schedule requires use of the following hosts that are not known to the system.
Hosts:
list
Action: This schedule may not be updated, instead create a new schedule without dependence on these hosts.
Detail: The schedule definition is as follows:
Schedule Summary: summary
GVM5948E
The schedule requires use of the following datastores that are not known to the system.
Datastores: list
Action: This schedule may not be updated, instead create a new schedule without dependence on these datastores.
Detail: The schedule definition is as follows:
Schedule Summary: summary
GVM5949E
The schedule requires use of the following virtual machines that are not known to the system.
Virtual Machines: list
Action: This schedule may not be updated, instead create a new schedule without dependence on these virtual machines.
Detail: The schedule definition is as follows:
Schedule Summary: summary
GVM5950I
Password set successfully.
Warning: message
Explanation
The password was set successfully with a warning.
User response
Follow the action described in the warning message.
GVM5951E An error occurred while making the Web server request. If this error persists, check the network connection with the Web server and verify that the Web server is running.
Error: error
GVM5952E The following command requires confirmation from the server: Command
Explanation
A command was issued, and a reply was expected. Some commands require a confirmation, which you cannot issue through the Data Protection for Virtual Environments GUI.
User response
Issue the command from the command line.
GVM5953E The following command is unknown to the server: Command
Explanation
An unknown command was issued to the server. The command might not be valid on the server version and platform or the command syntax might be incorrect.
User response
Verify that the command is valid for the server version and platform, and verify that the command syntax is correct.
GVM5954E The syntax of the following command is incorrect: Command.
Explanation
See message.
User response
Correct the syntax and issue the command from the command line. The activity log of the IBM Storage Protect Server shows all the commands issued before and after this command.
GVM5955E An internal server error occurred.
Explanation
See message.
User response
Try the command again. If this does not work, contact customer support. You might be asked to provide tracing information and information about the actions performed before the failure occurred.
GVM5956E The server ran out of memory while processing the request. Close any unnecessary processes on the IBM Storage Protect server and try the operation again.
Explanation
See message.
User response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5957E The database recovery log is full.
Explanation
See message.
User response
Before trying the action again, extend the recovery log or back up the IBM Storage Protect server database. Contact the administrator of the IBM Storage Protect server.
GVM5958E The server database is full.
Explanation
See message.
User response
Before trying the action again, extend the server database. Contact the administrator of the IBM Storage Protect server.
GVM5959E The server is out of storage space.
Explanation
See message.
User response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5960E You are not authorized to perform this action. An administrator with system authority can change your authority level to allow you to perform this action.
GVM5961E The object that you are attempting to access does not exist on the server.
GVM5962E The object that you are attempting to access is currently in use by another session or process. Retry the action at a later time.
GVM5963E The object that you are attempting to remove is referenced by another object defined to the server. Remove the other object before removing this one.
GVM5964E The object that you are attempting to access or remove is not available.
Explanation
See message.
User response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5965E The server encountered an I/O error while processing the request. For more information, see the operating system event or error log.
GVM5966E The action failed because the transaction could not be committed.
Explanation
See message.
User response
Retry the action at a later time. Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5967E The action failed because of a resource lock conflict.
Explanation
See message.
User response
Retry the action at a later time. Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5968E The action failed because of a mode conflict.
Explanation
See message.
User response
Retry the action at a later time. Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5969E The action failed because the server could not start a new thread.
Explanation
See message.
User response
Retry the action at a later time. Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5970E The server is not licensed to perform this action. If a license was purchased, use the command line to register the license.
GVM5971E The specified destination is not valid.
Explanation
See message.
User response
Enter a different destination or update the configuration with a valid destination, and try the action again.
GVM5972E The specified input file cannot be opened. Verify the file name and directory permissions, then try the action again.
GVM5973E The specified output file cannot be opened. Verify the file name and directory permissions, then try the action again.
GVM5974E An error occurred while writing to the specified output file.
Explanation
See message.
User response
Check the file system to ensure that there is enough space. Check the operating system event or error log for more information.
GVM5975E The specified administrator is not defined to this server.
Explanation
See message.
User response
Ensure that the administrator name was entered correctly. Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5976E The SQL statement could not be processed.
Explanation
An exception occurred while processing the SQL statement. Possible exceptions include divide-by-zero, math overflow, temporary table storage space unavailable, and data-type errors.
User response
Correct the SQL query and try again.
GVM5977E This operation is not allowed with this object.
Explanation
See message.
User response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5978E The table was not found in the server database.
Explanation
See message.
User response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5979E The specified file space name is not compatible with the filespace type.
Explanation
Unicode file space names are incompatible with non-unicode names.
User response
Enter a file space name of the correct type and try the action again.
GVM5980E The specified TCP/IP address is not valid. Verify the TCP/IP address and try the action again.
GVM5981E No objects were found that match the search conditions.
GVM5982E Your administrative ID on this server is locked. An administrator with system authority can unlock your ID.
GVM5983E The connection to the server was lost while performing the action.
Explanation
See message.
User response
This might indicate a network problem. Ensure that the server is running and the machine is accessible. Retry the action.
GVM5984E Your ID or password is not valid for this server.
Explanation
See message.
User response
Enter a valid ID or password for your IBM Storage Protect Server.
GVM5985E Your password expired on this server.
Explanation
Your IBM Storage Protect password has expired.
User response
Reset your password on the IBM Storage Protect Server or contact your IBM Storage Protect Server administrator to reset it.
GVM5986E The server cannot accept new sessions. If sessions are disabled for this server, issue the ENABLE SESSIONS command from the command line.
GVM5987E A communications failure occurred while processing the request. Retry the action at a later time.
GVM5988E The administrative API encountered an internal error while processing the request.
GVM5989E The administrative API cannot process the command document sent from the server.
Explanation
The XML command document could not be parsed. Either the file could not be read, or the file is corrupted.
User response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5990E The following command contains one or more invalid parameters: command.
Explanation
The Data Protection for Virtual Environments GUI tried to run a command, but the call to the API contained one or more invalid parameters.
User response
Check the parameters in the command. If you entered text in a field, you might find the error in the parameters and correct it. Viewing the activity log might help to determine the cause of the problem. Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5991E The administrative API encountered invalid parameters while processing the request.
Explanation
A command was run through the administrative API, but one of the parameters to an API method was invalid.
User response
This is typically an internal error, but it can be caused by unusual parameters. For example, characters such as: < > & can cause the problem. Check the parameters in the command. If you entered text in a field, you might find the error in the parameters and correct it.
GVM5992E The administrator's authority level on this server cannot be determined.
Explanation
See message.
User response
Use a different administrator ID. Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM5993E An object with the name that you specified already exists on the server. Enter a different name.
GVM5994E The version of the server is not supported by the Data Protection for Virtual Environments GUI.
GVM5995E An internal error has occurred.
Explanation
The operation failed after encountering an internal error.
User response
Retry the operation. If this does not work, contact customer support. You might be asked to provide tracing information and information about the actions performed before the failure occurred.
GVM5996E The operation failed, please go to the log for more details.
GVM5997E Wrong format of the end date and time. Please enter the end date and time format as yyyyMMddHHmmss.
GVM5998E Sorry, the description of the backup task was not created in a file. Please try again.
Explanation
On the general page of the backup wizard, you can describe your backup task in general.
GVM5999E The ESXHOST name you entered is too long. Please change to a shorter one.
GVM6000E Wrong Backup ID. Please try again.
GVM6001E An error occurred when processing the backup object file. Please try again later.
Explanation
When you click submit in the backup wizard, the object list will be stored in a file. When processing this file, an error occurred.
GVM6002E No backup object is selected. You must choose a source node to backup.
Explanation
To initiated a backup task, you have to choose an object on the source page of the backup wizard.
GVM6003E Wrong format of the start date and time. Please enter the start date and time format as yyyyMMddHHmmss.
GVM6004I Backup task Task Name started, would you like to monitor this task now?
GVM6005I Delete backup task completed successfully.
GVM6006E Delete backup task failed, please check log for more detail.
GVM6007I Restore Task Task ID is started successfully, would you like to monitor this task now?
GVM6008E Error Or Warning
GVM6009I Mounted backup Item could not be restored.
GVM6010I Result of attach is status ( Task ID: Task ID ), refer to events list to get the details.
GVM6011I Result of detach is status ( Task ID: Task ID ), refer to events list to get the details.
GVM6012I Command successfully submitted to the IBM Storage
Protect server.
Detail: Server Messages
GVM6013E The command submitted to the IBM Storage
Protect server failed.
Error: Error Code
Error Messages
Explanation
The cause of the problem is identified in the message text.
User response
Correct the problem based on the information that is provided in the message text. Then, try the action again.
GVM6014E No IBM Storage Protect server connection, please configure the IBM Storage Protect server in the configuration panel.
GVM6015E The selected items can only be under ONE datacenter.
GVM6018E The virtual machine VM name exists. Delete the virtual machine first before restoring it.
GVM6019E The target virtual machine VM name is running. Close the virtual machine before restoring virtual disks to it.
GVM6020E Some of selected virtual disks exist in target virtual machine. Remove those virtual disks from target virtual machine before restoring to it.
GVM6021E A VMCLI command failed.
Error: Error Messages
Explanation
The cause of the problem is identified in the message text.
User response
Correct the problem based on the information that is provided in the message text. Then, try the action again.
GVM6023E A command submitted to the IBM Storage
Protect server failed.
Error: Error Messages
Explanation
The cause of the problem is identified in the message text.
User response
Correct the problem based on the information that is provided in the message text. Then, try the action again.
GVM6024E Cannot find the file with format 'summary.date.log' in the path: path
GVM6025E Cannot find the IBM Storage Snapshot installation path using the VMCLI inquire_config command.
GVM6026E A VMCLI command to get version failed.
GVM6027I Backup task Task ID started, would you like to monitor this task now?
GVM6028E The Data Protection for Virtual Environments Web Server could not be contacted.
Explanation
The Data Protection for Virtual Environments GUI has attempted to contact its Web Server. The operation was not successful.
User response
- Verify that the Data Protection for Virtual Environments Web Server is running.
- Verify that the Web Server machine is running.
- Verify that the Web Server machine is accessible over the network.
GVM6029I Command successfully submitted to the server.
GVM6030E No host is found in datacenter datacenter name. Select another datacenter to restore.
GVM6031W The schedule does not contain all the required parameters. It cannot be displayed in the properties notebook.
Explanation
This schedule may have been created or modified outside of the Data Protection for Virtual Environments GUI.
User response
This schedule must be modified outside the Data Protection for Virtual Environments GUI.
GVM6032W One or more VMs exist. Do you want to continue the restore operation and overwrite the existing VMs?
GVM6033E The Administrator Id provided does not have sufficient privileges.
Explanation
The operation you are attempting requires a IBM Storage Protect Server Administrator Id to have at least Unrestricted Policy privilege.
User response
Contact your IBM Storage Protect Server Administrator to grant you Unrestricted Policy privilege for your Administrative Id. Or, use an alternate Id with such privilege and try again.
GVM6034E The nodename node name is already in use. Please choose another nodename.
Explanation
The node name chosen already exists on the server. Choose another name.
User response
Pick another node name to use. If you want to re-use this node, then unselect the 'Register Node' checkbox.
GVM6035E The node name node name is not defined on server. Make sure the node name you entered exists on the server.
Explanation
The node name entered does not exist on the server. Since you did not select 'Register Node' checkbox, the node name you enter must have been previously defined and exist on the server.
User response
Check the node name you are supposed to use and enter it again. If you want to register this node, then select the 'Register Node' checkbox.
GVM6036E The passwords in the entry field and the verify field do not match. Please try again.
Explanation
The new passwords entered do not match.
User response
Clear the fields and enter the same password in both password fields.
GVM6037W Please select one or more Datacenters to be managed.
Explanation
At least one Datacenter must be selected.
User response
Add one or more Datacenter(s) into the Managed Datacenters list.
GVM6038W One or more nodes do not have their password set. Make sure all nodes have their password set.
Explanation
If a node has 'Register Node' checkbox set, then that node's password must be set.
User response
Assign a password for nodes that are to be registered.
GVM6039I No datacenter node was found mapped to datacenter name. Select a datacenter node from the list to associate with datacenter name. Leave the selection empty to have the Configuration Wizard create a new datacenter node for it.
GVM6040I Are you sure you want to proceed without entering a IBM Storage
Protect Administrative ID?
Without IBM Storage
Protect Administrative access, the Wizard will not validate node names or register nodes. Instead, a macro file will be generated at the end of this Wizard for you to give to your IBM Storage
Protect Administrator to execute.
GVM6041I This task was skipped because it was not necessary or a pre-requisite task failed.
GVM6042E There was an error writing to script file: file path.
Explanation
An error was encountered when trying to write to file at the path indicated.
User response
Try the operation again.
GVM6043I Managed datacenters have changed. Please go to the data mover page to verify or change your current mappings.
GVM6044I No datacenter nodes were found for the vCenter node vCenter node and VMCLI node VMCLI node configuration. The Wizard will generate a default set of datacenter nodes for you.
GVM6045E The password entered is not acceptable. Choose another password.
Explanation
IBM Storage Protect Server could not accept the password chosen. It could be because the password did not meet certain password rule(s).
User response
Try with another password.
GVM6046W Unchecking this checkbox means you are supplying a node name that is already defined on the IBM Storage Protect Server AND that it is meant to be used for your configuration. Since this Wizard is proceeding without Administrative access, it cannot verify if the node exists or not. You should only proceed if you understand what you are doing.
Explanation
Since you are using the Configuration Wizard without a IBM Storage Protect Administrative ID, you should be very careful. The macro script file generated at the end of running the Configuration Wizard could contain errors because values are not validated.
User response
We strongly recommend you use the Configuration Wizard with a proper IBM Storage Protect Administrative ID.
GVM6047W The IBM Storage Protect node node has already been identified. If you want a different name other than the default name, edit this field again. If you want to use the same data mover for multiple Datacenters, please use Configuration Settings to do this.
Explanation
The node is already being used in this configuration.
User response
Try using another node name.
GVM6048W The IBM Storage Protect node node has invalid characters or exceeds 64 characters. Choose a different name and edit this field again.
Explanation
The node name is invalid or longer than 64 characters.
User response
Try using another node name.
GVM6049E The password entered is not acceptable on this Server because it contains invalid characters. The valid characters are: validCharsString
Explanation
IBM Storage Protect Server could not accept the password chosen because of invalid characters in the password.
User response
Try with another password that only contain valid characters.
GVM6050E The password entered is not acceptable on this Server because of the reason below. Choose another password.
Error: message
Explanation
IBM Storage Protect Server could not accept the password chosen. The reason why this password is not valid is given in the message.
User response
Try with another password that meets the rule(s).
GVM6051E Filter has changed, select Apply filter before continuing.
Explanation
Filter pattern must be applied after it is changed.
User response
Click the Apply filter button.
GVM6052E Select at least one item from a datacenter to continue.
Explanation
A host, host cluster, or VM must be selected to do a backup.
User response
Select an item under a datacenter.
GVM6053E Your selections exceed the 512 character limit allowed for backups, change your selection.
Explanation
The number of characters required to list the selected items exceeds the limit of 512 characters. Also, if hosts have been partially selected, characters are needed to list the VMs that are excluded from the backup.
User response
Create multiple backup tasks, with less selected items per task.
GVM6054I Changing the newly added virtual machines checkbox clears all selections of host clusters, hosts, and virtual machines. Press OK to proceed, or Cancel to leave unchanged.
Explanation
The state of the newly added virtual machines checkbox significantly impacts what is allowed to be selected on the source panel, so selections are cleared when the state changes.
User response
Select OK to proceed, or select Cancel to retain all selections.
GVM6055E Datacenter node datacenter node name does not have a IBM Storage Protect node mapped in the vmcli configuration file.
Explanation
The datacenter node must have a corresponding IBM Storage Protect node listed in the configuration file named vmcliprofile.
User response
Correct the problem by going to the Configuration tab in the GUI and selecting Edit Configuration to update the mapping for the datacenter. Also resolve any other configuration errors that are reported on the Configuration tab.
GVM6056E IBM Storage Protect datacenter node datacenter node name maps to vCenter datacenter name datacenter name in the vmcli configuration file, but datacenter name does not exist in the vCenter.
Explanation
The vCenter datacenter name maps to a datacenter node in the vmcli configuration file named vmcliprofile, but the data enter name does not exist in the vCenter.
User response
Correct the problem by going to the Configuration tab in the GUI and selecting Edit Configuration to update the mapping for the datacenter. Also resolve any other configuration errors that are reported on the Configuration tab.
GVM6057E You have selected items from multiple datacenters: datacenter list. This is not allowed, all selections must be from one datacenter.
Explanation
A backup task only supports items from one datacenter. If this is an existing task, changes in the vCenter configuration after task creation may have caused this problem.
User response
Check and correct the selections to make sure all selections are under the same datacenter.
GVM6058E The selected items item list are not found under datacenter datacenter name in the vCenter, please review and de-select them.
Explanation
Items originally selected are no longer found under the datacenter associated with the backup task. This may be caused by changes in the vCenter configuration.
User response
Review if the items are now located under a different datacenter. De-select the not found items, and make new selections under the other datacenter or create a new backup task for these items.
GVM6062E The password entered is not acceptable on this Server because it is too short. Passwords must have a least minPasswordLength characters.
Explanation
IBM Storage Protect Server could not accept the password chosen because it is too short.
User response
Try with another password that is longer than the required minimum length.
GVM6063E Component is downlevel, so its use is disabled in the GUI. You will only be able to use the GUI for component.
GVM6064E Mismatching IBM Storage
Protect Server entries in the current settings is detected.
IBM Storage
Protect Server definition used by the GUI:
server1
IBM Storage
Protect Server where backups are stored:
server2
Click Reset Server definition to clear the IBM Storage
Protect definition and enter new credentials. Or click on Reconfigure Environment to launch the Configuration Wizard to reconfigure your Data Protection for Virtual Environments environment.
Explanation
IBM Storage Protect detected mismatching IBM Storage Protect Server entries between the vmcliprofile and the current GUI's IBM Storage Protect Server connection.
User response
Pick one of the two actions available. You may either reset the IBM Storage Protect Server definition/credentials OR use the Conifiguration Wizard to set up a new environment.
GVM6065E The SSL Connection could not be made. The IBM Storage Protect SSL certificate is missing. Check for valid IBM Storage Protect certificate in the TSM-ve-truststore.jks
Explanation
IBM Storage Protect Server did not accept the SSL connection. SSL keystore is not in the default location or does not contain a IBM Storage Protect certificate.
User response
Check the TSM-ve-truststore.jks for a valid certificate, ensure TSM-ve-truststore.jks is in the correct default location.
GVM6066E The password entered is not acceptable on this Server because it is too long. Passwords cannot have more than maxPasswordLength characters.
Explanation
IBM Storage Protect Server could not accept the password chosen because it is too long.
User response
Try with another password that is shorter than the allowed maximum length.
GVM6067E The SSL Connection could not be made. The IBM Storage Protect SSL certificate is invalid.
Explanation
IBM Storage Protect Server did not accept the SSL connection. The TSM-ve-truststore.jks has an invalid IBM Storage Protect SSL certificate.
User response
Obtain a new valid IBM Storage Protect SSL certificate from the IBM Storage Protect server and place it in the TSM-ve-truststore.jks.
GVM6068E The non-SSL connection could not be made. This IBM Storage Protect Admin ID requires a IBM Storage Protect SSL connection.
Explanation
IBM Storage Protect Server did not accept the non-SSL connection. The IBM Storage Protect Server requires SSL be used with this Admin ID.
User response
Use SSL with this Admin ID. Ensure that the TSM-ve-truststore.jks with a valid IBM Storage Protect server SSL certificate is installed in the default location.
GVM6069E Your selections have caused the backup task definition to require count characters, which exceeds the 512 character limit. This can be caused by a long virtual machine exclude list, which is the list of all VMs under host(s) that were not selected. Either select more VMs under selected hosts or de-select the newly added virtual machines checkbox.
Explanation
When the newly added virtual machines checkbox is selected, the resulting backup task must list all unselected VMs for hosts that are partially selected. The backup task definition has a 512 character limit, and the combination of selected items and excluded VMs exceeds this limit.
User response
De-select the newly added virtual machines checkbox or create multiple backup tasks with less selected items per task.
GVM6070E Your selection of virtual machines has caused the backup task definition to require count characters, which exceeds the 512 character limit. Either create multiple backup tasks with less virtual machines per task, or select the newly added virtual machines checkbox and choose entire hosts with no more than a few unselected VMs.
Explanation
The backup task definition has a 512 character limit, and the total number of characters for the selected items exceeds this limit.
User response
Create multiple backup tasks with less selected virtual machines per task, or select the newly added virtual machines checkbox and then select hosts instead of individual virtual machines (you can de-select a small number of virtual machines per host if desired.)
GVM6071E There is no data mover node proxy relationship for datacenter node datacenter node name. Review the data mover relationships on the Configuration tab or the IBM Storage Protect server.
GVM6072E There is no datacenter node defined for datacenter datacenter name. Review the node configuration on the Configuration tab.
GVM6073I Node name name is currently locked. The Configuration Wizard will attempt to unlock this node if you choose to continue.
GVM6074E A connection with the IBM Storage Protect server (Address:Port) could not be established. Please verify the server address and admin port Server or Admin port are correct.
Explanation
The server might not be running or specified admin port or server admin port may be incorrect.
User response
Check the network connection with the IBM Storage Protect server machine. Verify that the server is running and try to log in again. Also verify server address and admin port information is correct.
GVM6075E The vCenter user name or password is not valid. Please try again.
Explanation
The vCenter user name or password is not valid.
User response
Enter the user name or password again.
GVM6076E Permission to perform this operation was denied. Please try with other user name.
Explanation
The vCenter user name is not valid.
User response
Enter another user name.
GVM6077I A IBM Storage Protect Administrative ID and password is currently not set. The absence of this information limits the actions that you can take in the GUI. Click OK to be taken to the configuration settings panel and enter an ID and password. Click Cancel to continue without using an ID and password.
GVM6078W You have chosen an Administrative ID that has less authority than the current ID. Are you sure you want change this ID?
Current IBM Storage
Protect Authority Level: Current Level
New IBM Storage
Protect Authority Level: New Level
Current Role: Current Role
New Role: New Role
Click OK to accept these changes, or Cancel to exit without change.
GVM6079I Here are the current and new roles for IBM Storage
Protect Admin IDs. Review and confirm these changes.
Current IBM Storage
Protect Authority Level: Current Level
New IBM Storage
Protect Authority Level: New Level
Current Role: Current Role
New Role: New Role
Click OK to accept these changes, or Cancel to exit without change.
GVM6080I ID has been changed without save. Previous ID will be loaded.
GVM6081I Your current UI role does not allow you to unlock or reset the VMCLI node. In order to make changes, go to the Server Credentials page and enter a IBM Storage Protect Admin ID and password that has the necessary priviliges for making VMCLI node updates. Select OK to save these credentials, then re-open the Configuration Settings notebook and you can make VMCLI node updates.
GVM6082I Your current UI role does not allow you visit other panels. Select OK to save these credentials, then re-open the Configuration Settings notebook and you can make other updates.
GVM6083I There are non-English characters contained in one or more datacenters. The domain will be adjusted accordingly.
GVM6084E Datacenter DataCenter Name cannot be added to the domain because it contains non-English characters.
Explanation
Datacenters that contain non-English characters are not currently supported. Therefore, they cannot be added to the domain.
User response
Datacenter will not be added to the domain.
GVM6085W Node Node Name already exists on the server. Attempt to rename node to New Node Name?
Explanation
Node name is already registered on the IBM Storage Protect server.
User response
Click Yes to attempt to rename node. Click No to make other changes. Example: unclick register node, rename node manually.
GVM6086W The following virtual machines for host Host Name have unsupported characters in their name: Invalid Virtual Machine Names. Therefore, these virtual machines are not backed up, regardless of your selections. You must rename these virtual machines to back them up.
Explanation
The following characters are not supported in virtual machine names: ' : ; * ? , < > / |
User response
Rename the identified virtual machines to remove unsupported characters from their name.
GVM6087E The following host clusters have unsupported characters in their name: Invalid Host Clusters. These host clusters cannot be selected for backup because they contain unsupported characters. Rename these host clusters or remove them from selection.
Explanation
The following characters are not supported in host cluster names: ' : ; * ? , < > / |
User response
Rename the identified host clusters to remove unsupported characters from their name. Or, remove them from your backup selection.
GVM6088E Your selections created an empty virtual machine list for backup. This issue might occur because all the selected virtual machines contain unsupported characters in their names. Make sure that you selected virtual machines that do not contain unsupported characters in their names.
Explanation
The following characters are not supported in virtual machine names: ' : ; * ? , < > / | . Virtual machine names that contain these characters are automatically removed from the backup task definition. This removal can cause an empty task definition.
User response
Rename the identified virtual machines to remove unsupported characters from their name. Or, select different virtual machines to back up.
GVM6089E The filter pattern cannot be applied because it contains unsupported characters. Change the pattern to remove the unsupported characters, then apply the filter again.
Explanation
The following characters are not supported in filter patern: ' : ; < > / |
User response
Change the filter pattern to remove unsupported characters, then apply the filter again.
GVM6090E A temporary datastore is not available to perform this operation. This temporary datastore is required in addition to the restore destination datastore.
Explanation
A datastore is required for use as a temporary restore destination for this operation. This temporary datastore must be from the same ESX host as the datastore that is used for the actual restore destination. However, the temporary datastore cannot be the same datastore that is used for the actual restore destination.
User response
Add a datastore to the destination ESX host. Then, select this datastore as the temporary restore destination.
GVM6091E There was an error creating opt file: file name.
Explanation
An error was encountered when trying to write to file.
User response
Try the operation again.
GVM6092E Creating service has failed. No services were created for data mover node node name.
Explanation
An error was encountered when trying to create IBM Storage Protect service for data mover node specified.
User response
Check environment and ensure user has proper rights before trying operation again.
GVM6093E Creating firewall for service has failed. Please manually add firewall rules for services installed.
Explanation
An error has occurred when attempting to add firewall rule for specified executable.
User response
Check environment and ensure user has proper rights before trying operation again or manually add rule to firewall for IBM Storage Protect client acceptor , IBM Storage Protect Agent and IBM Storage Protect Scheduler.
GVM6094W Local services were setup successfully but were unable to verify firewall access for these executable files:
agentExe
cadExe
schedExe
If any problems are experienced related to local services, verify that firewall access is available for these executable files.
Explanation
Microsoft firewall may be disabled or another firewall may be in place.
User response
Check environment and add rules manually if needed for the IBM Storage Protect client acceptor, IBM Storage Protect Agent, and IBM Storage Protect Scheduler.
GVM6095E Data mover node node name was successfully registered on the server, however no services were created.
Explanation
An error has occurred when trying to create services for specified node.
User response
Check environment and ensure user has proper rights before trying operation again.
GVM6096E Reason Code reason
This error was reported by the IBM Storage
Protect data mover. No further description is available.
For more information, review the error log errorLog on the data mover host machine
hostname at address 'address'.
Explanation
The data mover encountered an error with the reported reason code.
User response
Log into the host machine specified and view the error log for more information.
GVM6097W
Scan schedule schedule name was successfully defined on the server and
associated with node node name, however no services were created to run the schedule.
Detail: error
Explanation
- Create the option file for the VMCLI node.
- Set the password for the VMCLI node to a temporary password for the next step.
- Run the IBM Storage Protect Client Service Configuration Utility to create the services.
- Run the IBM Storage Protect Client Service Configuration Utility to start the client acceptor service.
- Reset the VMCLI node password.
User response
Delete the schedule and create the schedule again to automatically configure the services or manually configure the services. Check environment and ensure user has proper rights before trying operation again.
GVM6098W
Scan schedule schedule name was successfully defined on the server and associated with node node name.
IBM Storage
Protect services were created to run the schedule. However, reseting the VMCLI node password failed.
Detail: error
Explanation
An error was encountered while trying to reset the VMCLI node password.
User response
Use the Configuration Settings to reset the VMCLI node password.
GVM6099W Warning: If this task is canceled, all created data on the virtual machines that are not completely restored is lost and the virtual machines are removed from the ESX host.
Are you sure that you want to cancel this task?
Explanation
A cancel task command is submitted. Refresh to see the cancel progress.
User response
Cancel the selected task or allow the task to continue processing.
GVM6100W A dismount operation removes the iSCSI disks but does not remove the VM or its data. Before proceeding with dismount, make sure the following conditions exist:
-The mounted iSCSI disk is recovered.
-Storage vMotion completed migrating the VM to a local datastore.
If the recovery operation failed and you want to delete the VM, its data, and dismount any iSCSI targets, click Dismount and Delete. Dismount and Delete is a destructive action and deletes the VM and its data, regardless of the success or failure of the instant restore operation.
Based on this information, do you want dismount the VMs that are selected for instant restore?
Explanation
A dismount operation removes the iSCSI disks but does not remove the VM or its data. Before proceeding with dismount, make sure the following conditions exist: The mounted iSCSI disk is recovered,Storage vMotion completed migrating the VM to a local datastore.If the recovery operation failed and you want to delete the VM, its data, and dismount any iSCSI targets, click Dismount and Delete. Dismount and Delete is a destructive action and deletes the VM and its data, regardless of the success or failure of the instant restore operation.
User response
Click 'Dismount' to dismount the virtual machines that are selected for the instant restore operation. Click 'Dismount and Delete' to dismount the virtual machines that are selected for the instant restore operation, remove them from the ESX host, and verify that Storage vMotion is not running.
GVM6101W During a dismount operation, all created data on the virtual machines is lost and the virtual machines are removed from the ESX host.
Dismount the selected Instant Access virtual machines?
Explanation
All created data on the virtual machines is lost and the virtual machines are removed from the ESX host.
User response
Click 'Dismount' to dismount (cleanup) the instant access virtual machines.
GVM6102E Selecting multiple virtual machines with different restore types is not allowed.
Explanation
Restoring multiple virtual machines with different restore types is not supported.
User response
Select virtual machines that have the same restore type.
GVM6103I Cleanup Task Task ID is started successfully, would you like to monitor this task now?
GVM6104W Are you sure that you want to cancel this task?
Explanation
A cancel task command is submitted. Refresh to see the cancel progress.
User response
Cancel the selected task or allow the task to continue processing.
GVM6105I Your current UI role does not allow you to view backup property notebook.
GVM6106I Your current UI role does not allow you to edit nodes. In order to make changes, open the Configuration Settings notebook and go to the Server Credentials page and enter a IBM Storage Protect Admin ID and password that has the necessary priviliges for making node updates.
GVM6107E Reason Code reason
This error was reported by the IBM Storage
Protect data mover. No further description is available.
For more information, review the error log 'dsmerror.log' on the data mover host machine.
Explanation
The data mover encountered an error with the reported reason code.
User response
Log into the host machine where data mover resides and view the error log for more information.
GVM6108W Login information for vCenter needed.
Explanation
In order to install new local dm services, vCenter credentials are needed.
User response
Enter vCenter credentials in order to continue.
GVM6109E You do not have the privileges required to access the GUI.
Explanation
In order to access GUI content, the user must have the necessary vSphere privileges.
User response
Add the required privileges for the user.
GVM6110E You do not have the permissions required to access the GUI.
Explanation
In order to access GUI content, the user must have the necessary vSphere permissions.
User response
Add the required permissions for the user.
GVM6111I A new data center (name) was detected. Go to the Data Mover Nodes page to add a data center node for it.
GVM6112W The following shares and mounts will be removed and that data in there will be no longer accessible to the end user.
Dismount the selected shares and mounts?
mounts
Explanation
The selected shares and mounts will be removed.
User response
Click 'Dismount' to dismount (cleanup) the mounts and shares.
GVM6113I Dismount Task Task ID is started successfully, would you like to monitor this task now?
GVM6114W An error was encountered during the delete operation for option file: file name.
Explanation
An error was encountered during the delete operation. For example, this error might be caused by insufficient user permissions or the file no longer exists.
User response
Make sure the option file was deleted. If it still exists, delete this file manually.
GVM6115W The remove operation for IBM Storage Protect service: service failed.
Explanation
An error prevented the IBM Storage Protect service from being removed.
User response
Check the environment and ensure that the user has sufficient rights to run this operation. Then, try the operation again.
GVM6116E Fail to start iSCSI for mount proxy node node name.
Explanation
An error was encountered when trying to start iSCSI service for mount proxy node specified.
User response
Start the iSCSI service manually.
GVM6117E The connection to the IBM Storage Protect server was not successful because either the server credentials are invalid or an SSL certificate is required but could not be obtained.
Explanation
A correct server user ID and password and an SSL certificate for the IBM Storage Protect server are required to connect to the server.
User response
Go to the 'Configuration > Tasks > Edit IBM Storage Protect Configuration > Server Credentials' notebook page. Confirm that the login credentials are correct, that the correct port number is entered for the IBM Storage Protect admin port, and that the 'Use SSL...' checkbox is selected. The server's certificate must be retrieved and a truststore created using the procedure that is documented in the 'Learn more...' link.
GVM6118E You have selected organization VDCs from more than one provider VDC. For backup tasks, all selected organization VDCs must belong to the same provider VDC. Change your selections and retry the operation.
GVM6119E The following vcloud resources(vApp, organization, organization vDC) are invalid for selection because they have unsupported characters in their name:
reslist
Explanation
In order to create backup tasks, vcloud resources names must not contain any of the following characters: ' : ; * ? , < > / | .
User response
Rename the identified resources to remove unsupported characters from their name. Or, remove them from your backup selection.
GVM6120E You have selected the vApp from a different organization VDC. For restore tasks, all selected vApps must belong to the same organization VDC. Change your selections and retry the operation.
GVM6121E The vApp vApp name exists. Choose a different vApp name to be the target of the restore.
GVM6122E Your selection of items to back up has caused the backup task definition to require count characters, which exceeds the 512 character limit. Please create multiple backup tasks with less items per task.
Explanation
The backup task definition has a 512 character limit, and the total number of characters for the selected items exceeds this limit.
User response
Create multiple backup tasks with less items per task
GVM6123E The Organization VDC node can not be included because its Provider VDC node is not included. Please select the include checkbox for the Provider VDC node first, and try again.
GVM6124E The nodename node name is already in use. Please uncheck the register node checkbox or choose another nodename.
Explanation
The node name chosen already exists on the server. Either choose to not register it or use another name.
User response
Pick another node name to use. If you want to re-use this existing node, then unselect the 'Register Node' checkbox.
GVM6125W Are you certain that you want to remove the data mover node node name?
GVM6126W The IBM Storage Protect node node has already been used. If you want a different name other than the default name, edit this field again.
Explanation
The node is already being used in this configuration.
User response
Try using another node name.
GVM6127E The Organization VDC node can not be registered because its provider VDC is not valid.
GVM6128E The Organization VDC name OVDC name is invalid. For information about supported characters, refer to the IBM Storage Protect Administrator's Reference publication section about naming IBM Storage Protect objects.
GVM6129I This task was skipped because it was not necessary. No further action is required.
GVM6130W Internet explorer version version is not supported, please use a supported version or another browser. You may see visual and functional issues if you continue to use this unsupported browser.
Explanation
Due to differences in Internet Explorer implementation by version number, only specific versions are supported. The use of a standards-compliant browser such as Mozilla Firefox is recommended. However, if you are accessing the GUI as a plug-in from the vSphere Client, you are limited to using the Internet Explorer browser installed on the system where the vSphere client is installed.
User response
Use a supported version of Internet Explorer or another browser. Supported browser versions are documented in the online help.
GVM6131W The browser version is not supported, please use a supported browser. You may see visual and functional issues if you continue to use this unsupported browser.
Explanation
Due to differences in browser implementations, only specific versions are supported.
User response
Use a supported browser. Supported browser versions are documented in the online help.
GVM6132E At least one virtual machine that you have selected for restore to alternate location already exists in the Datacenter, so restore is not allowed. To restore to an alternate location when the destination virtual machine already exists, select only one virtual machine for the restore operation and choose a new name for the destination virtual machine. Duplicated VM: VM name
Explanation
When restoring to an alternate location, the destination virtual machine must not already exist.
User response
Use the single virtual machine restore wizard so that you can rename the destination virtual machine.
GVM6133W Target datastore not found, select a different destination datastore.
GVM6134E The user User Name is not authorized to any managed datacenters. Contact your system administrator.
GVM6135E You do not have required permissions to view virtual machines for this Event.
GVM6136E You do not have required permissions to view restore points for this virtual machine.
GVM6137E You do not have required permissions to view some attached points.
GVM6138E You do not have required permissions to view restore points for this datastore.
GVM6139E You do not have required permissions to detach for the restore point.
GVM6140E An error occurred processing user permissions. Contact your system administrator.
GVM6141I Some datacenters are not shown due to permissions requirements.
GVM6142E You do not have permissions to cancel this task.
GVM6143I The task is still in the starting state, please refresh the task and try the cancel again.
GVM6147I Some datacenters are not available because they have the same name for one or more datacenters. Datacenters with the same name are not supported.
GVM6148E Windows domain credentials are incorrect. Open the Configuration wizard, go to File Restore page, and try entering the credentials again.
Explanation
The Windows domain credentials that was entered on the File Restore page in the Configuration wizard is incorrect.
System action
Processing stops.
User response
Run the Configuration wizard again and re-enter the correct Windows domain credentials.
GVM6149E This action cannot be peformed because there is not a VMCLI node defined. To resolve, use the configuration wizard to define the VMCLI node and complete the other steps in the wizard.
GVM6150E This action cannot be peformed because there is not a vCloud Director node defined. To resolve, use the configuration wizard to define the vCloud Director node and complete the other steps in the wizard.
GVM6151E This action cannot be peformed because the connection to the IBM Storage Protect Server is not operational. Correct the connection problem, and retry this action.
GVM6152E This task requires use of the provider VDC node provider VDC node name from IBM Storage
Protect, but this node is not mapped to a known provider VDC in the vCloud Director.
This task may not be updated, instead create a new task without dependence on this provider VDC.
GVM6153E The Organization VDCs listed below were selected but are not configured to the IBM Storage
Protect server. You must remove these selections in order to execute this action.
org VDC name
GVM6154I Your current UI role does not allow you to view node details.
GVM6155E An error occurred when connecting to the IBM Storage Protect server server name. Either your admin ID or password is not valid, or the TCPPORT number was entered in the admin port field instead of the TCPADMINPORT or SSLTCPADMINPORT number.
Explanation
See message.
User response
Launch the Configuration Editor from the Configuration Tab and enter a valid ID or password for your IBM Storage Protect Server.
GVM6156E The password for the administrative user ID admin id expired on the IBM Storage Protect server server name.
Explanation
Your IBM Storage Protect administrative password has expired.
User response
Contact your IBM Storage Protect Server administrator to reset the password for the administrative user ID.
GVM6157E The IBM Storage Protect server port number tcp port is incorrect. The expected value for this port is tcp port from query, which is the value of the TCPPORT option. Please enter the expected value using the configuration wizard.
Explanation
The value entered in the IBM Storage Protect server port field must match the TCPPORT option on the IBM Storage Protect server.
User response
Use the configuration wizard to change the IBM Storage Protect server port field to the correct value.
GVM6159E An error occurred while processing a VMCLI command, and the GUI session will be closed. Log in and try the operation again. If the problem persists, contact your administrator.
GVM6160E An error occurred while writing to the frConfig.props configuration file.
Explanation
- The frConfig.props file is not in the Data Protection for Virtual Environments installation directory.
- The frConfig.props file is write-protected.
System action
Processing stops.
User response
Verify that the file exists in the Data Protection for Virtual Environments installation directory and that the file is not write-protected.
GVM6161E The local mount proxy node pair cannot be removed while the file level restore feature is enabled.
Explanation
File level restore processing requires a local mount proxy node.
User response
Disable the file level restore feature. Then, choose whether you want to remove the mount proxy node pair.
GVM6162E An error occurred while reading the frConfig.props configuration file.
Explanation
The frConfig.props file contains configuration options for file level restore processing. The file cannot be read. A common reason for this error is that the file is read-protected.
System action
Processing stops.
User response
Verify that the file is not read-protected.
GVM6164W The connection to the IBM Storage Protect server was not successful because a security certificate is required.
Explanation
Secure connections to the IBM Storage Protect server require an SSL certificate to create the connection. No certificate was found for the selected IBM Storage Protect server.
User response
If this message was not presented as part of using the configuration wizard, it must be retrieved and a truststore created using the procedure that is documented in the help.
GVM6165E The specified target node 'node-name' does not match the node 'node-name' stored in the user session.
Explanation
The input target node to the configuration host operation does not match the target node stored in the connected session.
User response
Retry the operation with the correct target node name.
GVM6166E A user session is invalid or no SSL certificate to accept.
Explanation
The initial IBM Storage Protect server connection detects that it requires an SSL certificate and the operation must be called again with the same connection. In this case, the connection is null or invalid.
User response
Make sure the operation call the second time to accept the certificate is using the same iniital connection.
GVM6167E A Windows mount proxy node and a Linux mount proxy node are required to enable File Restore.
Explanation
Either one mounnt proxy node or no proxy node were specified for the configure host operation.
User response
Retry the operation with a node list that have a Windows mount proxy node and a Linux mount proxy node.
GVM6168E Configure host failed. Check the tasks list for more information.
Explanation
Configuring the host consists of registering the target node, registering the data mover and creating the services for backup and restore, registering the mount proxy nodes and creating the services for file level restore. One of these tasks encountered an error.
User response
Fix the error and retry the operation.
GVM6169E Unexpected error while configuring to the IBM Storage Protect server.
Explanation
- Unknown error while trying to connecting to the IBM Storage Protect server.
- Unknown error while trying to write to the server's database file, tsmserver.props.
User response
Check the network connection with the IBM Storage Protect server machine. Verify that the server is running and try to log in again. Also verify server port information is correct.
GVM6170E Unexpected error, can not get policy domain for node 'node-name'.
Explanation
The target node does not exist on the IBM Storage Protect server or an internal error occurred during the node query.
User response
Run the configuration wizard to register the target node or update the node to another policy domain.
GVM6171E Unexpected error, schedule 'schedule-name' does not exist on the IBM Storage Protect server.
Explanation
The schedule may have been deleted accidently during the operation.
User response
Select a different schedule.
GVM6172E 'domain-name' is not a valid Windows domain.
Explanation
LOCALHOST or the computer name are not valid domains.
User response
Enter a valid domain.
GVM6173E The domain is missing from the user name.
Explanation
The user name you entered is not part of a domain.
User response
Ensure that the user name is in the DOMAIN\UserName format.
GVM6174E The following addresses cannot be reached: httpurl, httpsurl. Verify that the TSM Client Acceptor (CAD) is up and running.
Explanation
The CAD service is not running for the data mover.
System action
The operation cannot continue without a connection to the data mover CAD service.
User response
Make sure the data mover CAD service is running and that the node has the proper proxy relationships established.
GVM6175E The TCP port from the HTTP response cannot be retrieved. Verify that the TSM Client Acceptor (CAD) is up and running.
Explanation
The CAD service is not running for the data mover.
System action
The operation cannot continue without a connection to the data mover CAD service.
User response
Make sure the data mover CAD service is running and that the node has the proper proxy relationships established.
GVM6176E The TCP port from the HTTP response cannot be parsed or found.
Explanation
The HTTP stream from the agent does not contain the TCP port number.
System action
The operation cannot continue without a connection to the data mover CAD service.
User response
Make sure the data mover CAD service is running and that the node has the proper proxy relationships established.
GVM6177E An exception was encountered while parsing TCP port string: tcpport.
Explanation
The HTTP stream from the agent returned an invalid TCP port number.
System action
The operation cannot continue without a connection to the data mover CAD service.
User response
Make sure the data mover CAD service is running and that the node has the proper proxy relationships established.