GVM messages
GVM0001E The operation failed with return code return code
GVM0002E An internal error occurred: type of error
GVM0003E A connection with the IBM Storage Protect server
could not be established.
Explanation
The server might not be running.
Administrator response
Check the network connection with the server machine. Verify that the
server is running and try to log in again.
GVM0004W Are you certain that you want to delete this data?
Explanation
You cannot recover the data after it is deleted. Ensure that the data is not needed
before you delete it.
Administrator response
Click OK to delete the data or click Cancel to cancel this
action.
GVM0005W The connection with the IBM Storage Protect server
has timed out.
Explanation
Possible causes include a long-running operation, a problem on the server, or a
communications problem.
Administrator response
If the operation is long-running, the operation might be complete or it
might soon be complete. Before trying the operation again, determine if the expected result
occurred. Check the activity log of the IBM Storage Protect
server for errors related to the operation. Using a SSL port without selecting SSL can cause this
error.
GVM0006I A server connection with the name server name has been successfully
created. Click OK to continue.
GVM0007W There is no IBM Storage Protect server definition
found.
Explanation
A connection for a IBM Storage Protect server
must be defined before any server operations or queries are performed.
Administrator response
To define a server:
- Click the Configuration tab.
- Click the Edit Configuration Settings action link.
- Click the IBM Storage Protect Server Credentials tab.
GVM0008E An error occurred while writing to the server's database file, tsmserver.props
Explanation
The server definition could not be written to the tsmserver.props
file.
Administrator response
The file must reside in the install directory of IBM Storage Protect. Before you try the action again, verify that the
file exists and that the file is not write protected.
GVM0011I The VM VM name is spanned into multiple datastores. It can only be
restored to its original location.
GVM0011W The VM VM name exists, are you going to over-write it?
GVM0012W The VM VM name is running, make sure the system is powered down, then
hit OK to continue.
GVM0020E A connection with the vCenter server could not be established.
Explanation
The server might not be running.
Administrator response
This might indicate a network problem. Ensure that the server is running
and the machine is accessible. Try the action again.
GVM0021I A connection with the vCenter server has been established.
GVM0022E The VMCLI inquire configuration command failed, the following messages describe the
error.
Explanation
The Derby database might not be running.
Administrator response
Correct the problem. Try the action again.
GVM0023I The VMCLI inquire configuration command completed successfully.
GVM0024E Failed to determine which product or products are installed.
Administrator response
Correct the problem. Try the action again.
GVM0025I Successfully determined which product or products are installed.
GVM0026E Multiple restore points have been selected, but they are not located in the same
datacenter.
Explanation
Selecting restore points from different datacenters is not permitted. The restore
points must all be located in the same datacenter.
Administrator response
Select the restore points from the same datacenter or select just a
single restore point.
GVM0027E Multiple restore points have been selected, but they are not from the same
backup.
Explanation
Selecting restore points from different backups is not permitted. The restore
points must all be located in the same backup.
Administrator response
For restores from IBM Storage Protect Snapshot, all restore points must come from the same backup. You cannot restore multiple VMs that
come from of different backups.
GVM0028E A key configuration file is missing: vmcliConfiguration.xml.
Explanation
The file vmcliConfiguration.xml is required for the GUI to operate, but has not been
found during GUI session startup. This is an unusual problem, it may be due to an install issue or
manual editing of the file.
Administrator response
Make sure the file is located in the correct directory, has correct access
permissions, and has valid syntax for its content. Retry accessing the
GUI.
GVM0029E Invalid mode tag in file vmcliConfiguration.xml.
Explanation
The xml tag mode in file vmcliConfiguration.xml is required for the GUI to operate,
but is missing or has an incorrect value. This may be due to an install issue or manual editing of
the file.
Administrator response
Make sure the tag is specified with a valid value. Retry accessing the
GUI.
GVM0030E Invalid enable_direct_start tag in file vmcliConfiguration.xml.
Explanation
The xml tag enable_direct_start in file vmcliConfiguration.xml is required for the
GUI to operate, but is missing or has an incorrect value. This may be due to an install issue or
manual editing of the file.
Administrator response
Make sure the tag is specified with a valid value. Retry accessing the
GUI.
GVM0031E Invalid URL tag for the specified mode tag in file vmcliConfiguration.xml.
Explanation
In file vmcliConfiguration.xml, the URL tag corresponding to the specified mode tag
is required for the GUI to operate, but is missing or has an incorrect value. This may be due to an
install issue or manual editing of the file.
Administrator response
Make sure the correct URL tag is specified with a valid value for the
specified mode. Retry accessing the GUI.
GVM0032E Invalid VMCLIPath tag in file vmcliConfiguration.xml.
Explanation
The xml tag VMCLIPath in file vmcliConfiguration.xml is required for the GUI to
operate, but is missing or has an incorrect value. This may be due to an install issue or manual
editing of the file.
Administrator response
Make sure the tag is specified with a valid value. Retry accessing the
GUI.
GVM0033E Invalid interruptDelay tag in file vmcliConfiguration.xml.
Explanation
The xml tag interruptDelay in file vmcliConfiguration.xml is required for the GUI to
operate, but is missing or has an incorrect value. This may be due to an install issue or manual
editing of the file.
Administrator response
Make sure the tag is specified with a valid value. Retry accessing the
GUI.
GVM0099E The VM name entered VM name conflicts with an existing VM. Please enter
a different name.
GVM0100E An error occurred while processing the request to the Web server. If this error persists,
check the network connection with the Web server and verify that the Web server is running.Detail:
exception
exception message
GVM0101E A request to the server took too long to complete. If this error persists, check the
network connection with the Web server and verify that the Web server is running.
GVM0102E An error occurred while processing the response from the Web server.Detail:
error
GVM0103E An error occurred while making the Web server request. If this error persists, check the
network connection with the Web server and verify that the Web server is running.Error:
message
GVM0104E No matching device class found. Please return to source page and reselect.
GVM0105E No matching proxy node found. Please return to source page and reselect.
GVM0106E No proxy ESX hosts available.
GVM0107I Password set successfully.
GVM0108E Set password failed.Error: message
Explanation
The password may be incorrect or the server is not running.
Administrator response
Verify the password is correct then try the action again. Or check the
network connection with the server machine and verify that the server is running then try the action
again.
GVM0109E Get managed domain failed.Error: message
GVM0110E Multiple restore points have been selected, but they are not the same backup
type.
Explanation
Selecting restore points of different types is not allowed. The restore points must
all be located on either a IBM Storage Protect server or in
the IBM Storage Protect Snapshot repository.
Administrator response
Select the same type of restore points or select just a single restore
point.
GVM0111E Backup ID is null.
Explanation
An internal error occurred.
Administrator response
Refresh the table and perform the action again.
GVM0112E Task ID is null.
Explanation
An internal error occurred.
Administrator response
Refresh the table and perform the action again.
GVM0113E Could not open a pop-up window.
Explanation
An internal error occurred.
Administrator response
Try the action again.
GVM0114E Virtual machine name is null.
Explanation
An internal error occurred.
Administrator response
Refresh the table and perform the action again.
GVM0115E Datastore does not exist.
Explanation
An internal error occurred.
Administrator response
Refresh the table and perform the action again.
GVM0116I No selection was made, the whole virtual machine will be attached.
Explanation
No selection was made.
Administrator response
Continue with the action or cancel the action.
GVM0117I Domain set successfully.
GVM0118E Set domain failed.Error: message
Explanation
The server might not be running. The permissions on the file directory may be
incorrect.
Administrator response
Check the network connection with the server machine. Verify that the
server is running and try the action again. Check the permissions of the directory indicated in
SystemErr.log if error indicates incorrect permissions.
GVM0119E The schedule requires use of the following datacenters that are not in the active domain.
Datacenters: list Action: This schedule may not be updated, instead either update
the domain construct to include the datacenters, or create a new schedule without dependence on
these datacenters. Detail: The schedule definition is as follows: Schedule Summary
summary
GVM0120E The schedule requires use of the following datacenters that are not known to the system.
Datacenters: list Action: This schedule may not be updated, instead create a new
schedule without dependence on these datacenters. Detail: The schedule definition is as follows:
Schedule Summary: summary
GVM0121E The schedule requires use of the following hosts that are not known to the system. Hosts:
list Action: This schedule may not be updated, instead create a new schedule
without dependence on these hosts. Detail: The schedule definition is as follows: Schedule Summary:
summary
GVM0122E The schedule requires use of the following datastores that are not known to the system.
Datastores: list Action: This schedule may not be updated, instead create a new
schedule without dependence on these datastores. Detail: The schedule definition is as follows:
Schedule Summary: summary
GVM0123E The schedule requires use of the following virtual machines that are not known to the
system. Virtual Machines: list Action: This schedule may not be updated, instead
create a new schedule without dependence on these virtual machines. Detail: The schedule definition
is as follows: Schedule Summary: summary
GVM0124I Password set successfully. Warning: message
Explanation
The password was set successfully with a warning.
Administrator response
Follow the action described in the warning message.
GVM0125E An error occurred while making the Web server request. If this error persists, check the
network connection with the Web server and verify that the Web server is running. Error:
error
GVM1100E The following command requires confirmation from the server: Command
Explanation
A command was issued, and a reply was expected. Some commands require a
confirmation, which you cannot issue through the IBM Storage Protect GUI.
Administrator response
Issue the command from the command line.
GVM1101E The following command is unknown to the server: Command
Explanation
An unknown command was issued to the server. The command might not be valid on the
server version and platform or the command syntax might be incorrect.
Administrator response
Verify that the command is valid for the server version and platform, and
verify that the command syntax is correct.
GVM1102E The syntax of the following command is incorrect: Command.
Administrator response
Correct the syntax and issue the command from the command line. The
activity log of the IBM Storage Protect Server shows all the
commands issued before and after this command.
GVM1103E An internal server error occurred.
Administrator response
Try the command again. If this does not work, contact customer support.
You might be asked to provide tracing information and information about the actions performed before
the failure occurred.
GVM1104E The server ran out of memory while processing the request. Close any unnecessary processes
on the IBM Storage Protect server and try the operation
again.
Administrator response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM1105E The database recovery log is full.
Administrator response
Before trying the action again, extend the recovery log or back up the
IBM Storage Protect server database. Contact the administrator
of the IBM Storage Protect server.
GVM1106E The server database is full.
Administrator response
Before trying the action again, extend the server database. Contact the
administrator of the IBM Storage Protect
server.
GVM1107E The server is out of storage space.
Administrator response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM1108E You are not authorized to perform this action. An administrator with system authority can
change your authority level to allow you to perform this action.
GVM1109E The object that you are attempting to access does not exist on the server.
GVM1110E The object that you are attempting to access is currently in use by another session or
process. Retry the action at a later time.
GVM1111E The object that you are attempting to remove is referenced by another object defined to the
server. Remove the other object before removing this one.
GVM1112E The object that you are attempting to access or remove is not available.
Administrator response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM1113E The server encountered an I/O error while processing the request. For more information, see
the operating system event or error log.
GVM1114E The action failed because the transaction could not be committed.
Administrator response
Retry the action at a later time. Before trying the action again, contact
the administrator of the IBM Storage Protect
server.
GVM1115E The action failed because of a resource lock conflict.
Administrator response
Retry the action at a later time. Before trying the action again, contact
the administrator of the IBM Storage Protect
server.
GVM1116E The action failed because of a mode conflict.
Administrator response
Retry the action at a later time. Before trying the action again, contact
the administrator of the IBM Storage Protect
server.
GVM1117E The action failed because the server could not start a new thread.
Administrator response
Retry the action at a later time. Before trying the action again, contact
the administrator of the IBM Storage Protect
server.
GVM1118E The server is not licensed to perform this action. If a license was purchased, use the
command line to register the license.
GVM1119E The specified destination is not valid.
Administrator response
Enter a different destination or update the configuration with a valid
destination, and try the action again.
GVM1120E The specified input file cannot be opened. Verify the file name and directory permissions,
then try the action again.
GVM1121E The specified output file cannot be opened. Verify the file name and directory permissions,
then try the action again.
GVM1122E An error occurred while writing to the specified output file.
Administrator response
Check the file system to ensure that there is enough space. Check the
operating system event or error log for more information.
GVM1123E The specified administrator is not defined to this server.
Administrator response
Ensure that the administrator name was entered correctly. Before trying
the action again, contact the administrator of the IBM Storage Protect server.
GVM1124E The SQL statement could not be processed.
Explanation
An exception occurred while processing the SQL statement. Possible exceptions
include divide-by-zero, math overflow, temporary table storage space unavailable, and data-type
errors.
Administrator response
Correct the SQL query and try again.
GVM1125E This operation is not allowed with this object.
Administrator response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM1126E The table was not found in the server database.
Administrator response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM1127E The specified file space name is not compatible with the filespace type.
Explanation
Unicode file space names are incompatible with non-unicode names.
Administrator response
Enter a file space name of the correct type and try the action
again.
GVM1128E The specified TCP/IP address is not valid. Verify the TCP/IP address and try the action
again.
GVM1129E No objects were found that match the search conditions.
GVM1130E Your administrative ID on this server is locked. An administrator with system authority can
unlock your ID.
GVM1131E The connection to the server was lost while performing the action.
Administrator response
This might indicate a network problem. Ensure that the server is running
and the machine is accessible. Retry the action.
GVM1132E Your ID or password is not valid for this server.
Administrator response
Launch the Configuration Editor from the Configuration Tab and enter a
valid ID or password for your IBM Storage Protect
Server.
GVM1133E Your password expired on this server.
Explanation
Your IBM Storage Protect password has
expired.
Administrator response
Reset your password on the IBM Storage Protect Server or contact your IBM Storage Protect Server administrator to reset
it.
GVM1134E The server cannot accept new sessions. If sessions are disabled for this server, issue the
ENABLE SESSIONS command from the command line.
GVM1135E A communications failure occurred while processing the request. Retry the action at a later
time.
GVM1136E The administrative API encountered an internal error while processing the
request.
GVM1137E The administrative API cannot process the command document sent from the server.
Explanation
The XML command document could not be parsed. Either the file could not be read, or
the file is corrupted.
Administrator response
Before trying the action again, contact the administrator of the IBM Storage Protect server.
GVM1138E The following command contains one or more invalid parameters:
command.
Explanation
The IBM Storage Protect GUI tried to run a
command, but the call to the API contained one or more invalid parameters.
Administrator response
Check the parameters in the command. If you entered text in a field, you
might find the error in the parameters and correct it. Viewing the activity log might help to
determine the cause of the problem. Before trying the action again, contact the administrator of the
IBM Storage Protect server.
GVM1139E The administrative API encountered invalid parameters while processing the
request.
Explanation
A command was run through the administrative API, but one of the parameters to an
API method was invalid.
Administrator response
This is typically an internal error, but it can be caused by unusual
parameters. For example, characters such as: < > & can cause the problem. Check the
parameters in the command. If you entered text in a field, you might find the error in the
parameters and correct it.
GVM1140E The administrator's authority level on this server cannot be determined.
Administrator response
Use a different administrator ID. Before trying the action again, contact
the administrator of the IBM Storage Protect
server.
GVM1141E An object with the name that you specified already exists on the server. Enter a different
name.
GVM1142E The version of the server is not supported by the IBM Storage Protect GUI.
GVM1143E An internal error has occurred.
Explanation
The operation failed after encountering an internal error.
Administrator response
Retry the operation. If this does not work, contact customer support. You
might be asked to provide tracing information and information about the actions performed before the
failure occurred.
GVM1144E The operation failed, please go to the log for more details.
GVM1145E Wrong format of the end date and time. Please enter the end date and time format as
yyyyMMddHHmmss.
GVM1146E Sorry, the description of the backup task was not created in a file. Please try
again.
Explanation
On the general page of the backup wizard, you can describe your backup task in
general.
GVM1147E The ESXHOST name you entered is too long. Please change to a shorter one.
GVM1148E Wrong Backup ID. Please try again.
GVM1150E An error occurred when processing the backup object file. Please try again later.
Explanation
When you click submit in the backup wizard, the object list will be stored in a
file. When processing this file, an error occurred.
GVM1151E No backup object is selected. You must choose a source node to backup.
Explanation
To initiated a backup task, you have to choose an object on the source page of the
backup wizard.
GVM1152E Wrong format of the start date and time. Please enter the start date and time format as
yyyyMMddHHmmss.
GVM1153I Backup task Task Name started, would you like to monitor this task
now?
GVM1154I Delete backup task completed successfully.
GVM1155E Delete backup task failed, please check log for more detail.
GVM1156I Restore Task Task ID is started successfully, would you like to monitor
this task now?
GVM1157E
Error Or Warning
GVM1158I Mounted backup Item could not be restored.
GVM1159I Result of attach is status ( Task ID: Task ID ),
refer to events list to get the details.
GVM1160I Result of detach is status ( Task ID: Task ID ),
refer to events list to get the details.
GVM1161I Command successfully submitted to the IBM Storage Protect server. Detail: Server Messages
GVM1162E The command submitted to the IBM Storage Protect
server failed. Error: Error Code
Error Messages
Explanation
The cause of the problem is identified in the message text.
Administrator response
Correct the problem based on the information that is provided in the
message text. Then, try the action again.
GVM1163E No IBM Storage Protect server connection, please
configure the IBM Storage Protect server in the configuration
panel.
GVM1164E The selected items can only be under ONE datacenter.
GVM1165E Authentication failed. Could not connect to vCenter. Make sure you log in using the VMware
vSphere client and have a valid session.
GVM1166E Authentication failed. Please log in using the VMware vSphere client.
GVM1167E The virtual machine VM name exists. Delete the virtual machine first
before restoring it.
GVM1168E The target virtual machine VM name is running. Close the virtual machine
before restoring virtual disks to it.
GVM1169E Some of selected virtual disks exist in target virtual machine. Remove those virtual disks
from target virtual machine before restoring to it.
GVM1170E A VMCLI command failed. Error: Error Messages
Explanation
The cause of the problem is identified in the message text.
Administrator response
Correct the problem based on the information that is provided in the
message text. Then, try the action again.
GVM1171E A request submitted to the VMware vCenter server failed. Error: Error
Messages
Explanation
The cause of the problem is identified in the message text.
Administrator response
Correct the problem based on the information that is provided in the
message text. Then, try the action again.
GVM1172E A command submitted to the IBM Storage Protect server
failed. Error: Error Messages
Explanation
The cause of the problem is identified in the message text.
Administrator response
Correct the problem based on the information that is provided in the
message text. Then, try the action again.
GVM1173E Cannot find the file with format 'summary.date.log' in the path: path
GVM1174E Cannot find the IBM Storage Protect Snapshot
installation path using the VMCLI inquire_config command.
GVM1175E A VMCLI command to get version failed.
GVM1176I Backup task Task ID started, would you like to monitor this task
now?
GVM1177E The IBM Storage Protect Web Server could not be
contacted.
Explanation
The IBM Storage Protect GUI has attempted to
contact its Web Server. The operation was not successful.
Administrator response
Perform one or more of the following steps to try and determine the
problem:Verify that the IBM Storage Protect Web Server is
running. Verify that the Web Server machine is running. Verify that the Web Server machine is
accessible over the network. Close the IBM Storage Protect
GUI. Start the GUI again when the problem is resolved.
GVM1178I Command successfully submitted to the server.
GVM1179E No host is found in datacenter datacenter name. Select another
datacenter to restore.
GVM1180W The schedule does not contain all the required parameters. It cannot be displayed in the
properties notebook.
Explanation
This schedule may have been created or modified outside of IBM Storage Protect GUI.
Administrator response
This schedule must be modified outside the IBM Storage Protect GUI.
GVM1181W One or more VMs exist. Do you want to continue the restore operation and overwrite the
existing VMs?
GVM1182E The Administrator Id provided does not have sufficient privileges.
Explanation
The operation you are attempting requires a IBM Storage Protect Server Administrator Id to have at least
Unrestricted Policy privilege.
Administrator response
Contact your IBM Storage Protect
Server Administrator to grant you Unrestricted Policy privilege for your Administrative Id. Or, use
an alternate Id with such privilege and try again.
GVM1183E The nodename node name is already in use. Please choose another
nodename.
Explanation
The node name chosen already exists on the server. Choose another
name.
Administrator response
Pick another node name to use. If you want to re-use this node, then
unselect the 'Register Node' checkbox.
GVM1184E The node name node name is not defined on server. Make sure the node
name you entered exists on the server.
Explanation
The node name entered does not exist on the server. Since you did not select
'Register Node' checkbox, the node name you enter must have been previously defined and exist on the
server.
Administrator response
Check the node name you are supposed to use and enter it again. If you
want to register this node, then select the 'Register Node' checkbox.
GVM1185E The passwords in the entry field and the verify field do not match. Please try
again.
Explanation
The new passwords entered do not match.
Administrator response
Clear the fields and enter the same password in both password
fields.
GVM1186W Please select one or more Datacenters to be managed.
Explanation
At least one Datacenter must be selected.
Administrator response
Add one or more Datacenter(s) into the Managed Datacenters
list.
GVM1187W One or more nodes do not have their password set. Make sure all nodes have their password
set.
Explanation
If a node has 'Register Node' checkbox set, then that node's password must be
set.
Administrator response
Assign a password for nodes that are to be
registered.
GVM1188I No datacenter node was found mapped to datacenter name. Select a
datacenter node from the list to associate with datacenter name. Leave the
selection empty to have the Configuration Wizard create a new datacenter node for it.
GVM1189I Are you sure you want to proceed without entering a IBM Storage Protect Administrative ID? Without IBM Storage Protect Administrative access, the Wizard will not validate
node names or register nodes. Instead, a macro file will be generated at the end of this Wizard for
you to give to your IBM Storage Protect Administrator to
execute.
GVM1190I This task was skipped because it was not necessary or a prerequisite task failed.
GVM1191E There was an error writing to script file: file path.
Explanation
An error was encountered when trying to write to file at the path
indicated.
Administrator response
Try the operation again.
GVM1192I Managed datacenters have changed. Please go to the data mover page to verify or change your
current mappings.
GVM1193I No datacenter nodes were found for the vCenter node vCenter node and
VMCLI node VMCLI node configuration. The Wizard will generate a default set of
datacenter nodes for you.
GVM1194E The password entered is not acceptable. Choose another password.
Explanation
IBM Storage Protect Server could not accept
the password chosen. It could be because the password did not meet certain password
rules.
Administrator response
Try with another password.
GVM1195W Unchecking this checkbox means you are supplying a node name that is already defined on the
IBM Storage Protect Server AND that it is meant to be used for
your configuration. Since this Wizard is proceeding without Administrative access, it cannot verify
if the node exists or not. You should only proceed if you understand what you are doing.
Explanation
Since you are using the Configuration Wizard without a IBM Storage Protect Administrative ID, you should be very careful. The
macro script file generated at the end of running the Configuration Wizard could contain errors
because values are not validated.
Administrator response
We strongly recommend you use the Configuration Wizard with a proper
IBM Storage Protect Administrative
ID.
GVM1196W The IBM Storage Protect node node
has already been identified. If you want a different name other than the default name, edit this
field again. If you want to use the same data mover for multiple Datacenters, please use
Configuration Settings to do this.
Explanation
The node is already being used in this configuration.
Administrator response
Try using another node name.
GVM1197W The IBM Storage Protect node node
has invalid characters or exceeds 64 characters. Choose a different name and edit this field
again.
Explanation
The node name is invalid or longer than 64 characters.
Administrator response
Try using another node name.
GVM1198E The password entered is not acceptable on this Server because it contains invalid
characters. The valid characters are: validCharsString
Explanation
IBM Storage Protect Server could not accept
the password chosen because of invalid characters in the password.
Administrator response
Try with another password that only contain valid
characters.
GVM1199E The password entered is not acceptable on this Server because of the reason below. Choose
another password. Error: message
Explanation
IBM Storage Protect Server could not accept
the password chosen. The reason why this password is not valid is given in the
message.
Administrator response
Try with another password that meets the rules.
GVM1200E Filter has changed, select Apply filter before continuing.
Explanation
Filter pattern must be applied after it is changed.
Administrator response
Click the Apply filter button.
GVM1201E Select at least one item from a datacenter to continue.
Explanation
A host, host cluster, or VM must be selected to do a backup.
Administrator response
Select an item under a datacenter.
GVM1202E Your selections exceed the 512 character limit allowed for backups, change your
selection.
Explanation
The number of characters required to list the selected items exceeds the limit of
512 characters. Also, if hosts have been partially selected, characters are needed to list the VMs
that are excluded from the backup.
Administrator response
Create multiple backup tasks, with less selected items per
task.
GVM1203I Changing the newly added virtual machines checkbox clears all selections of host clusters,
hosts, and virtual machines. Press OK to proceed, or Cancel to leave unchanged.
Explanation
The state of the newly added virtual machines checkbox significantly impacts what is
allowed to be selected on the source panel, so selections are cleared when the state
changes.
Administrator response
Select OK to proceed, or select Cancel to retain all
selections.
GVM1204E Datacenter node datacenter node name does not have a IBM Storage Protect node mapped in the vmcli configuration
file.
Explanation
The datacenter node must have a corresponding IBM Storage Protect node listed in the configuration file named
vmcliprofile.
Administrator response
Correct the problem by going to the Configuration tab in the GUI and
selecting Edit Configuration to update the mapping for the datacenter. Also resolve any other
configuration errors that are reported on the Configuration tab.
GVM1205E IBM Storage Protect datacenter node
datacenter node name maps to vCenter datacenter name datacenter
name in the vmcli configuration file, but datacenter name does not
exist in the vCenter.
Explanation
The vCenter datacenter name maps to a datacenter node in the vmcli configuration
file named vmcliprofile, but the data enter name does not exist in the vCenter.
Administrator response
Correct the problem by going to the Configuration tab in the GUI and
selecting Edit Configuration to update the mapping for the datacenter. Also resolve any other
configuration errors that are reported on the Configuration tab.
GVM1206E You have selected items from multiple datacenters: datacenter list. This
is not allowed, all selections must be from one datacenter.
Explanation
A backup task only supports items from one datacenter. If this is an existing task,
changes in the vCenter configuration after task creation may have caused this
problem.
Administrator response
Check and correct the selections to make sure all selections are under the
same datacenter.
GVM1207E The selected items item list are not found under datacenter
datacenter name in the vCenter, please review and de-select them.
Explanation
Items originally selected are no longer found under the datacenter associated with
the backup task. This may be caused by changes in the vCenter configuration.
Administrator response
Review if the items are now located under a different datacenter.
De-select the not found items, and make new selections under the other datacenter or create a new
backup task for these items.
GVM1208I The datacenter in the source page has changed, please reselect the data mover node in the
Destination page.
Explanation
When item selection is changed to a different datacenter, the valid data movers may
change. You are required to select the data mover again on the Destination page.
Administrator response
Reselect the data mover node in the Destination
Page.
GVM1209I Are you sure you want to use node data mover node as a data mover for
datacenter datacenter?
GVM1210I Are you sure you want to use node node name that is already registered
on the IBM Storage Protect server as a data mover for
datacenter datacenter? If so, we will mark the node as such and you will be
unable to make any further changes to the node.
GVM1211E The password entered is not acceptable on this Server because it is too short. Passwords
must have a least minPasswordLength characters.
Explanation
IBM Storage Protect Server could not accept
the password chosen because it is too short.
Administrator response
Try with another password that is longer than the required minimum
length.
GVM1212E
Component is downlevel, so its use is disabled in the GUI. You will only be able
to use the GUI for component.
GVM1213E Mismatching IBM Storage Protect Server entries in the
current settings is detected. IBM Storage Protect Server
definition used by the GUI: server1
IBM Storage Protect Server where backups are stored:
server2 Click Reset Server definition to clear the IBM Storage Protect definition and enter new credentials. Or click on
Reconfigure Environment to launch the Configuration Wizard to reconfigure your IBM Storage Protect environment.
Explanation
IBM Storage Protect detected mismatching
IBM Storage Protect Server entries between the vmcliprofile
and the current GUI's IBM Storage Protect Server
connection.
Administrator response
Pick one of the two actions available. You may either reset the IBM Storage Protect Server definition/credentials OR use the
Configuration Wizard to set up a new environment.
GVM1214E The SSL Connection could not be made. The IBM Storage Protect SSL certificate is missing. Check for valid
IBM Storage Protect certificate in the
TSM-ve-truststore.jks
Explanation
IBM Storage Protect Server did not accept the
SSL connection. SSL keystore is not in the default location or does not contain a IBM Storage Protect certificate.
Administrator response
Check the TSM-ve-truststore.jks for a valid certificate, ensure
TSM-ve-truststore.jks is in the correct default location.
GVM1215E The password entered is not acceptable on this Server because it is too long. Passwords
cannot have more than maxPasswordLength characters.
Explanation
IBM Storage Protect Server could not accept
the password chosen because it is too long.
Administrator response
Try with another password that is shorter than the allowed maximum
length.
GVM1216E The SSL Connection could not be made. The IBM Storage Protect SSL certificate has expired.
Explanation
IBM Storage Protect Server did not accept the
SSL connection. The TSM-ve-truststore.jks has an expired IBM Storage Protect SSL certificate.
Administrator response
Obtain a new valid IBM Storage Protect SSL certificate from the IBM Storage Protect server and
place it in the TSM-ve-truststore.jks.
GVM1217E The non-SSL connection could not be made. This IBM Storage Protect Admin ID requires an IBM Storage Protect SSL connection.
Explanation
IBM Storage Protect Server did not accept the
non-SSL connection. The IBM Storage Protect Server requires
SSL be used with this Admin ID.
Administrator response
Use SSL with this Admin ID. Ensure that the TSM-ve-truststore.jks with a
valid IBM Storage Protect server SSL certificate is installed
in the default location.
GVM1218E Your selections have caused the backup task definition to require count
characters, which exceeds the 512 character limit. This can be caused by a long virtual machine
exclude list, which is the list of all VMs under host(s) that were not selected. Either select more
VMs under selected hosts or de-select the newly added virtual machines checkbox.
Explanation
When the newly added virtual machines checkbox is selected, the resulting backup
task must list all unselected VMs for hosts that are partially selected. The backup task definition
has a 512 character limit, and the combination of selected items and excluded VMs exceeds this
limit.
Administrator response
De-select the newly added virtual machines checkbox or create multiple
backup tasks with less selected items per task.
GVM1219E Your selection of virtual machines has caused the backup task definition to require
count characters, which exceeds the 512 character limit. Either create multiple
backup tasks with less virtual machines per task, or select the newly added virtual machines
checkbox and choose entire hosts with no more than a few unselected VMs.
Explanation
The backup task definition has a 512 character limit, and the total number of
characters for the selected items exceeds this limit.
Administrator response
Create multiple backup tasks with less selected virtual machines per task,
or select the newly added virtual machines checkbox and then select hosts instead of individual
virtual machines (you can de-select a small number of virtual machines per host if
desired.)
GVM1220E There is no data mover node proxy relationship for datacenter node datacenter node
name. Review the data mover relationships on the Configuration tab or the IBM Storage Protect server.
GVM1221E There is no datacenter node defined for datacenter datacenter name.
Review the node configuration on the Configuration tab.
GVM1222I Node name name is currently locked. The Configuration Wizard will
attempt to unlock this node if you choose to continue.
GVM1223E A connection with the IBM Storage Protect server
(Address:Port) could not be established. Please verify the server address and
Server or Admin port are correct.
Explanation
The server might not be running or specified admin port or server port may be
incorrect.
Administrator response
Check the network connection with the IBM Storage Protect server machine. Verify that the server is running
and try to log in again. Also verify server port and admin port information is
correct.
GVM1224E The vCenter user name or password is not valid. Please try again.
Explanation
The vCenter user name or password is not valid.
Administrator response
Enter the user name or password again.
GVM1225E Permission to perform this operation was denied. Please try with other user name.
Explanation
The vCenter user name is not valid.
Administrator response
Enter another user name.
GVM1250I A IBM Storage Protect Administrative ID and password
is currently not set. The absence of this information limits the actions that you can take in the
GUI. Click OK to be taken to the configuration settings panel and enter an ID and password. Click
Cancel to continue without using an ID and password.
GVM1251W You have chosen an Administrative ID that has less authority than the current ID. Are you
sure you want change this ID? Current IBM Storage Protect
Authority Level: Current Level New IBM Storage Protect Authority Level: New Level
Current Role: Current Role New Role: New Role Click OK to
accept these changes, or Cancel to exit without change.
GVM1252I Here are the current and new roles for IBM Storage Protect Admin IDs. Review and confirm these changes.
Current IBM Storage Protect Authority Level: Current
Level New IBM Storage Protect Authority Level:
New Level Current Role: Current Role New Role: New
Role Click OK to accept these changes, or Cancel to exit without change.
GVM1253I ID has been changed without save. Previous ID will be loaded.
GVM1254I Your current UI role does not allow you to unlock or reset the VMCLI node. In order to make
changes, go to the Server Credentials page and enter a IBM Storage Protect Admin ID and password that has the necessary
privileges for making VMCLI node updates. Select OK to save these credentials, then re-open the
Configuration Settings notebook and you can make VMCLI node updates.
GVM1255I Your current UI role does not allow you visit other panels. Select OK to save these
credentials, then re-open the Configuration Settings notebook and you can make other
updates.
GVM1256I There are non-English characters contained in one or more datacenters. The domain will be
adjusted accordingly.
GVM1257E Datacenter DataCenter Name cannot be added to the domain because it
contains non-English characters.
Explanation
Datacenters that contain non-English characters are not currently supported.
Therefore, they cannot be added to the domain.
Administrator response
Datacenter will not be added to the domain.
GVM1258W Node Node Name already exists on the server. Attempt to rename node to
New Node Name?
Explanation
Node name is already registered on the IBM Storage Protect server.
Administrator response
Click Yes to attempt to rename node. Click No to make other changes.
Example: unclick register node, rename node manually.
GVM1259W The following virtual machines for host Host Name have unsupported
characters in their name: Invalid Virtual Machine Names. Therefore, these virtual
machines are not backed up, regardless of your selections. You must rename these virtual machines to
back them up.
Explanation
The following characters are not supported in virtual machine names: ' : ; * ? ,
< > / \ |
Administrator response
Rename the identified virtual machines to remove unsupported characters
from their name.
GVM1260E The following host clusters have unsupported characters in their name: Invalid
Host Clusters. These host clusters cannot be selected for backup because they contain
unsupported characters. Rename these host clusters or remove them from selection.
Explanation
The following characters are not supported in host cluster names: ' : ; * ? , <
> / \ |
Administrator response
Rename the identified host clusters to remove unsupported characters from
their name. Or, remove them from your backup selection.
GVM1261E Your selections created an empty virtual machine list for backup. This issue might occur
because all the selected virtual machines contain unsupported characters in their names. Make sure
that you selected virtual machines that do not contain unsupported characters in their
names.
Explanation
The following characters are not supported in virtual machine names: ' : ; * ? ,
< > / \ | . Virtual machine names that contain these characters are automatically removed from
the backup task definition. This removal can cause an empty task definition.
Administrator response
Rename the identified virtual machines to remove unsupported characters
from their name. Or, select different virtual machines to back up.
GVM1262E The filter pattern cannot be applied because it contains unsupported characters. Change the
pattern to remove the unsupported characters, then apply the filter again.
Explanation
The following characters are not supported in filter patern: ' : ; < > / \ |
Administrator response
Change the filter pattern to remove unsupported characters, then apply the
filter again.
GVM1263E A temporary datastore is not available to perform this operation. This temporary datastore
is required in addition to the restore destination datastore.
Explanation
A datastore is required for use as a temporary restore destination for this
operation. This temporary datastore must be from the same ESX host as the datastore that is used for
the actual restore destination. However, the temporary datastore cannot be the same datastore that
is used for the actual restore destination.
Administrator response
Add a datastore to the destination ESX host. Then, select this datastore
as the temporary restore destination.
GVM1264E There was an error creating opt file: file name.
Explanation
An error was encountered when trying to write to file.
Administrator response
Try the operation again.
GVM1265E Creating service has failed. No services were created for data mover
node node name.
Explanation
An error was encountered when trying to create IBM Storage Protect service for data mover node
specified.
Administrator response
Check environment and ensure user has proper rights before trying
operation again.
GVM1266E Creating firewall for service has failed. Please manually add firewall
rules for services installed.
Explanation
An error has occurred when attempting to add firewall rule for specified
executable.
Administrator response
Check environment and ensure user has proper rights before trying
operation again or manually add rule to firewall for IBM Storage Protect client acceptor, IBM Storage Protect Agent and IBM Storage Protect Scheduler.
GVM1267W Local services were setup successfully but were unable to verify firewall access for these
executable files: agentExe
cadExe
schedExe If any problems are experienced related to local services, verify that
firewall access is available for these executable files.
Explanation
Microsoft firewall may be disabled or another firewall may be in
place.
Administrator response
Check environment and add rules manually if needed for the IBM Storage Protect client acceptor, IBM Storage Protect Agent, and IBM Storage Protect Scheduler.
GVM1269E Reason Code reason This error was reported by the IBM Storage Protect data mover. No further description is available.
For more information, review the error log errorLog on the data mover host
machine hostname at address 'address'.
Explanation
The data mover encountered an error with the reported reason code.
Administrator response
Log into the host machine specified and view the error log for more
information.
GVM1270W Warning: If this task is canceled, all created data on the virtual machines that are not
completely restored is lost and the virtual machines are removed from the ESX host. Are you sure
that you want to cancel this task?
Explanation
A cancel task command is submitted. Refresh to see the cancel
progress.
Administrator response
Cancel the selected task or allow the task to continue
processing.
GVM1271W Scan schedule schedule name was successfully defined on the server and
associated with node node name, however no services were created to run the
schedule. Detail: error
Explanation
An error was encountered in one of the steps below when trying to create IBM Storage Protect services for the VMCLI node.
- Create the option file for the VMCLI node.
- Set the password for the VMCLI node to a temporary password for the next step.
- Run the IBM Storage Protect Client Service Configuration
Utility to create the services.
- Run the IBM Storage Protect Client Service Configuration
Utility to start the client acceptor service.
- Reset the VMCLI node password.
Administrator response
Delete the schedule and create the schedule again to automatically
configure the services or manually configure the services. Check environment and ensure user has
proper rights before trying operation again.
GVM1272W Scan schedule schedule name was successfully defined on the server and
associated with node node name. IBM Storage Protect services were created to run the schedule. However,
resetting the VMCLI node password failed. Detail: error
Explanation
An error was encountered while trying to reset the VMCLI node password.
Administrator response
Use the Configuration Settings to reset the VMCLI node password.
GVM1273W A dismount operation removes the iSCSI disks but does not remove the VM or its data. Before
proceeding with dismount, make sure the following conditions exist: -The mounted iSCSI disk is
recovered. -Storage vMotion completed migrating the VM to a local datastore. If the recovery
operation failed and you want to delete the VM, its data, and dismount any iSCSI targets, click
Dismount and Delete. Dismount and Delete is a destructive action and deletes the VM and its data,
regardless of the success or failure of the instant restore operation. Based on this information, do
you want dismount the VMs that are selected for instant restore?
Explanation
A dismount operation removes the iSCSI disks but does not remove the VM or its data.
Before proceeding with dismount, make sure the following conditions exist: The mounted iSCSI disk is
recovered,Storage vMotion completed migrating the VM to a local datastore.If the recovery operation
failed and you want to delete the VM, its data, and dismount any iSCSI targets, click Dismount and
Delete. Dismount and Delete is a destructive action and deletes the VM and its data, regardless of
the success or failure of the instant restore operation.
Administrator response
Click 'Dismount' to dismount the virtual machines that are selected for
the instant restore operation. Click 'Dismount and Delete' to dismount the virtual machines that are
selected for the instant restore operation, remove them from the ESX host, and verify that Storage
vMotion is not running.
GVM1274W During a dismount operation, all created data on the virtual machines is lost and the
virtual machines are removed from the ESX host. Dismount the selected Instant Access virtual
machines?
Explanation
All created data on the virtual machines is lost and the virtual machines are
removed from the ESX host.
Administrator response
Click 'Dismount' to dismount (cleanup) the instant access virtual
machines.
GVM1275E Selecting multiple virtual machines with different restore types is not allowed.
Explanation
Restoring multiple virtual machines with different restore types is not
supported.
Administrator response
Select virtual machines that have the same restore
type.
GVM1276I Cleanup Task Task ID is started successfully, would you like to monitor
this task now?
GVM1277W Are you sure that you want to cancel this task?
Explanation
A cancel task command is submitted. Refresh to see the cancel
progress.
Administrator response
Cancel the selected task or allow the task to continue
processing.
GVM1278I Your current UI role does not allow you to view backup property notebook.
GVM1279I Your current UI role does not allow you to edit nodes. In order to make changes, open the
Configuration Settings notebook and go to the Server Credentials page and enter a IBM Storage Protect Admin ID and password that has the necessary
privileges for making node updates.
GVM1280E Reason Code reason This error was reported by the IBM Storage Protect data mover. No further description is available.
For more information, review the error log 'dsmerror.log' on the data mover host machine.
Explanation
The data mover encountered an error with the reported reason code.
Administrator response
Log into the host machine where data mover resides and view the error log
for more information.
GVM1281W Login information for vCenter needed.
Explanation
In order to install new local dm services, vCenter credentials are
needed.
Administrator response
Enter vCenter credentials in order to continue.
GVM1282E You do not have the privileges required to access the GUI.
Explanation
In order to access GUI content, the user must have the necessary vSphere
privileges.
Administrator response
Add the required privileges for the user.
GVM1283E You do not have the permissions required to access the GUI.
Explanation
In order to access GUI content, the user must have the necessary vSphere
permissions.
Administrator response
Add the required permissions for the user.
GVM1284I A new data center (name) was detected. Go to the Data Mover Nodes page
to add a data center node for it.
GVM1285W The following shares and mounts will be removed and that data in there will be no longer
accessible to the end user. Dismount the selected shares and mounts?mounts
Explanation
The selected shares and mounts will be removed.
Administrator response
Click 'Dismount' to dismount (cleanup) the mounts and
shares.
GVM1286I Dismount Task Task ID is started successfully, would you like to monitor
this task now?
GVM1287W An error was encountered during the delete operation for option file: file
name.
Explanation
An error was encountered during the delete operation. For example, this error might
be caused by insufficient user permissions or the file no longer exists.
Administrator response
Make sure the option file was deleted. If it still exists, delete this
file manually.
GVM1288W The remove operation for IBM Storage Protect service:
service failed.
Explanation
An error prevented the IBM Storage Protect
service from being removed.
Administrator response
Check the environment and ensure that the user has sufficient rights to
run this operation. Then, try the operation again.
GVM1289E Fail to start iSCSI for mount proxy node node name.
Explanation
An error was encountered when trying to start iSCSI service for mount proxy node
specified.
Administrator response
Start the iSCSI service manually.
GVM1290E The connection to the IBM Storage Protect server was
not successful because either the server credentials are invalid or an SSL certificate is required
but could not be obtained.
Explanation
A correct server user ID and password and an SSL certificate for the IBM Storage Protect server are required to connect to the
server.
Administrator response
Go to the Configuration > Tasks > Edit IBM Storage Protect Configuration > Server Credentials notebook page.
Confirm that the login credentials are correct, that the correct port number is entered for the
IBM Storage Protect admin port, and that the Use SSL... check
box is selected. The server certificate must be retrieved and a truststore created using the
procedure that is documented in the Learn more... link.
GVM1291W The connection to the IBM Storage Protect server was
not successful because a security certificate is required.
Explanation
Secure connections to the IBM Storage Protect
server require an SSL certificate to create the connection. No certificate was found for the
selected IBM Storage Protect server.
Administrator response
If this message was not presented as part of using the configuration
wizard or notebook, then proceed to the configuration notebook by choosing Configuration > Tasks >
Edit IBM Storage Protect Configuration > Server
Credentials.
GVM1300E An error occurred when connecting to the vCenter server.
Explanation
An error occurred when connecting to the vCenter server. No further information is
available.
Administrator response
Retry the operation. If the problem persists, contact your IBM Storage Protect administrator.
GVM1301E The vCenter user does not have the privileges that are required to perform registration
operations.
Explanation
To perform registration operations, the vCenter user must have the Register
extension and Update extension privileges, and the vCenter user is missing at least one of these
privileges.
Administrator response
Enter a vCenter user that has both required privileges, and retry the
operation.
GVM1302E An error occurred when attempting to register the plug-in to the vCenter server.
Explanation
An error occurred during plug-in registration. No further information is
available.
Administrator response
Retry the operation. If the problem persists, contact your IBM Storage Protect administrator.
GVM1501E The following vcloud resources(vApp, organization, organization vDC) are invalid for
selection because they have unsupported characters in their name: reslist
Explanation
In order to create backup tasks, vcloud resources names must not contain any of the
following characters: ' : ; * ? , < > / \ | .
Administrator response
Rename the identified resources to remove unsupported characters from
their name. Or, remove them from your backup selection.
GVM1502E You have selected the vApp from a different organization VDC. For restore tasks, all
selected vApps must belong to the same organization VDC. Change your selections and retry the
operation.
GVM1503E The vApp vApp name exists. Choose a different vApp name to be the target
of the restore.
GVM2001E Your selection of items to back up has caused the backup task definition to require
count characters, which exceeds the 512 character limit. Please create multiple
backup tasks with less items per task.
Explanation
The backup task definition has a 512 character limit, and the total number of
characters for the selected items exceeds this limit.
Administrator response
Create multiple backup tasks with less items per
task
GVM2002E The Organization VDC node can not be included because its Provider VDC node is not
included. Please select the include checkbox for the Provider VDC node first, and try
again.
GVM2004E The nodename node name is already in use. Please uncheck the register
node checkbox or choose another nodename.
Explanation
The node name chosen already exists on the server. Either choose to not register it
or use another name.
Administrator response
Pick another node name to use. If you want to re-use this existing node,
then unselect the 'Register Node' checkbox.
GVM2007E The Organization VDC node can not be registered because its provider VDC is not valid.
GVM2008E The Organization VDC name OVDC name is invalid. For information
about supported characters, refer to the IBM Storage Protect Administrator's Reference publication
section about naming IBM Storage Protect objects.
GVM2009I This task was skipped because it was not necessary. No further action is
required.
GVM2010W Internet explorer version version is not supported, please use a
supported version or another browser. You may see visual and functional issues if you continue to
use this unsupported browser.
Explanation
Due to differences in Internet Explorer implementation by version number, only
specific versions are supported. The use of a standards-compliant browser such as Mozilla Firefox is
recommended. However, if you are accessing the GUI as a plug-in from the vSphere Client, you are
limited to using the Internet Explorer browser installed on the system where the vSphere client is
installed.
Administrator response
Use a supported version of Internet Explorer or another browser. Supported
browser versions are documented in the online help.
GVM2011W The browser version is not supported, please use a supported browser.
You may see visual and functional issues if you continue to use this unsupported browser.
Explanation
Due to differences in browser implementations, only specific versions are
supported.
Administrator response
Use a supported browser. Supported browser versions are documented in the
online help.
GVM2012E At least one virtual machine that you have selected for restore to alternate location
already exists in the Datacenter, so restore is not allowed. To restore to an alternate location
when the destination virtual machine already exists, select only one virtual machine for the restore
operation and choose a new name for the destination virtual machine. Duplicated VM: VM
name
Explanation
When restoring to an alternate location, the destination virtual machine must not
already exist.
Administrator response
Use the single virtual machine restore wizard so that you can rename the
destination virtual machine.
GVM2012W Target datastore not found, select a different destination datastore.
GVM2013E The user User Name is not authorized to any managed datacenters. Contact
your system administrator.
GVM2014E You do not have required permissions to view virtual machines for this Event.
GVM2015E You do not have required permissions to view restore points for this virtual
machine.
GVM2016E You do not have required permissions to view some attached points.
GVM2017E You do not have required permissions to view restore points for this datastore.
GVM2018E You do not have required permissions to detach for the restore point.
GVM2019E An error occurred processing user permissions. Contact your system administrator.
GVM2020I Some datacenters are not shown due to permissions requirements.
GVM2021E You do not have permissions to cancel this task.
GVM2022I The task is still in the starting state, please refresh the task and try the cancel
again.
GVM2025E An error occurred while writing to the flrConfig.props configuration file.
Explanation
The flrConfig.props file contains configuration options for file level restore
processing. Possible reasons for this error include the following situations: The flrConfig.props
file is not in the IBM Tivoli Data Protection for VMware installation directory. The flrConfig.props
file is write-protected.
Administrator response
Verify that the file exists in the IBM Tivoli Data Protection for VMware
installation directory and that the file is not write-protected.
GVM2026E The local mount proxy node pair cannot be removed while the file level restore feature is
enabled.
Explanation
File level restore processing requires a local mount proxy node.
Administrator response
Disable the file level restore feature. Then, choose whether you want to
remove the mount proxy node pair.
GVM2027E An error occurred while reading the flrConfig.props configuration file.
Explanation
The flrConfig.props file contains configuration options for file level restore
processing. The file cannot be read. A common reason for this error is that the file is
read-protected.
Administrator response
Verify that the file is not read-protected.
GVM2028E The REST API service is unavailable. The web server could not be contacted.
Explanation
The web service on the remote machine on which the data mover is installed could
not be contacted.
Administrator response
Perform one or more of the following steps to try and determine the
problem:
- Verify that the web server service on the remote data mover host is running.
- Verify that this web server is accessible over the network.
GVM2029E vCenter credentials are incorrect.
Explanation
In order to install the data mover services, valid vCenter credentials are
needed.
Administrator response
Verify that you have the correct vCenter credentials. Then try the action
again.
GVM2030W The specified user does not have sufficient permissions to access the following data
centers: list of data centers. Click OK to continue or cancel to enter another
user name.
Explanation
The user credentials that you use to authenticate to the vCenter Server must have
the correct privileges to access the VMware datacenters.
Administrator response
Verify that you have the correct privileges. See the vCenter Server
credentials online help page to see the privileges that are required.
GVM2031I The specified user has sufficient permissions to access the following data centers:
list of data centers. Click OK to continue or cancel to enter another user
name.
Explanation
The user credentials that you use to authenticate to the vCenter Server must have
the correct privileges to access the VMware datacenters.
Administrator response
Verify that you have the correct privileges. See the vCenter Server
credentials online help page to see the privileges that are required.
GVM2032W The specified user does not have sufficient permissions to access any data center. Click OK
to continue or cancel to enter another user name.
Explanation
The user credentials that you use to authenticate to the vCenter Server must have
the correct privileges to access the VMware datacenters.
Administrator response
Verify that you have the correct privileges. See the vCenter Server
credentials online help page to see the privileges that are required.
GVM2033I Some datacenters are not available because they have the same name for one or more
datacenters. Datacenters with the same name are not supported.
GVM2132E An error occurred when connecting to the IBM Tivoli Storage Manager server server
name. Either your admin ID or password is not valid, or the TCPPORT number was entered in
the admin port field instead of the TCPADMINPORT or SSLTCPADMINPORT number.
Administrator response
Launch the Configuration Editor from the Configuration Tab and enter a
valid ID or password for your IBM Tivoli Storage Manager Server.
GVM2133E The password for the administrative user ID admin id expired on the IBM
Tivoli Storage Manager server server name.
Explanation
Your IBM Tivoli Storage Manager administrative password has
expired.
Administrator response
Contact your IBM Tivoli Storage Manager Server administrator to reset the
password for the administrative user ID.
GVM2134E The IBM Tivoli Storage Manager server port number tcp port is incorrect.
The expected value for this port is tcp port from query, which is the value of
the TCPPORT option. Please enter the expected value using the configuration wizard.
Explanation
The value entered in the IBM Tivoli Storage Manager server port field must match the
TCPPORT option on the IBM Tivoli Storage Manager server.
Administrator response
Use the configuration wizard to change the IBM Tivoli Storage Manager
server port field to the correct value.
GVM2135E This schedule contains an unsupported option so it cannot be edited. This situation can
occur when the schedule was created or updated by a tool other than the Data Protection for VMware
GUI.
GVM2136E An error occurred while processing a VMCLI command, and the GUI session will be closed. Log
in and try the operation again. If the problem persists, contact your administrator.
GVM3000E Windows domain credentials are incorrect. Open the Configuration Editor, go to File Restore
page, and try entering the credentials again.
Explanation
The Windows domain credentials that was entered on the File Restore page in the
Configuration Editor is incorrect.
Administrator response
Run the Configuration Editor again and re-enter the correct Windows domain
credentials.