Pools Capacity report

Shows a chart of the 20 pools with the most allocated space, and a table with space statistics for all pools. Use the report to review space allocation in your pools.

Charts

The bar chart shows the used space and available space for pools on storage systems.

Report output

For each pool on a storage system, the following information is provided:

Storage Pool Name
The name that was assigned to the pool when it was added to the system.
Storage System Name
A user-defined name of the storage system. If a name was not defined, IBM Spectrum Control shows the name that was defined when the storage system was added for monitoring.
Storage System Configuration
Shows whether a storage system is configured as back-end storage or configured to virtualize back-end storage. If this value is Storage System, the storage system is configured as back-end storage. If this value is Storage Virtualizer, the storage system is configured to virtualize back-end storage.
Storage Pool Capacity (GiB)
The total amount of storage space in a pool.
Storage Pool Used Space (GiB)
The amount of storage space that is used in the pool.
Storage Pool Available Space (GiB)
The amount of unused space that is not reserved for volumes in pools that are on the storage system.
IBM Spectrum Control uses the following formula to determine this value:
pool capacity - used space
For XIV systems and IBM Storage Accelerate, this value represents the unallocated physical space in the pool, not the unallocated virtual space. For some storage systems, this value usually includes only the usable capacity, but might also include overhead space if the pool is unformatted.
Storage Pool Physical Allocation Percentage
The percentage of physical space in a pool that is reserved for volumes. This value is always less than or equal to 100% because you cannot reserve more physical space than is available in a pool.
IBM Spectrum Control uses the following formula to determine the allocation percentage: 
(allocated space ÷ pool capacity) × 100
For example, the physical allocation percentage is 25% for a total pool size of 200 GiB. Therefore, the space that is reserved for volumes is 50 GiB.
Storage Pool Virtual Allocation Percentage
The percentage of physical space in a pool that is committed to the total virtual capacity of the volumes in the pool. In thin-provisioned environments, this percentage exceeds 100% if a pool is overcommitted (over-provisioned).
IBM Spectrum Control uses the following formula to determine the allocation percentage: 
(total volume capacity ÷ pool capacity) × 100
For example, the allocation percentage is 200% for a total pool size of 15 GiB. Therefore, the virtual capacity that is committed to the volumes in the pool is 30 GiB.
This configuration means that twice as much space is committed than is physically contained in the pool. If the allocation percentage is 100% for the same pool, then the virtual capacity that is committed to the pool is 15 GiB. This configuration means that all the physical capacity of the pool is already allocated to volumes.
An allocation percentage that is higher than 100% is considered aggressive. The pool has insufficient physical capacity to satisfy the maximum allocation for all the thin-provisioned volumes in the pool. In such cases, you can use the value for Storage Pool Shortfall Percentage to estimate how critical the shortage of space is for a pool.
This value is only available for pools with thin-provisioned volumes.
Storage Pool Shortfall Percentage
The percentage of the remaining unallocated volume space in a pool that is not available to be allocated.
The higher the percentage, the more critical the shortfall of pool space.
IBM Spectrum Control uses the following formula to determine this percentage: 
(unallocatable space ÷ (virtual capacity − allocated space)) × 100
You can use this percentage to determine when the amount of overcommitted space in a pool reaches a critically high level. For example, the physical space in a pool might be less than the committed virtual space. In this case, the pool does not have enough space to fulfill the commitment to virtual space.
This value represents the percentage of the committed virtual space that is not available in a pool. As more space is used over time by volumes while the pool capacity remains the same, this percentage increases.
For example, the physical capacity of a pool is 70 GiB, however, 150 GiB of virtual space is committed to thin-provisioned volumes. If the volumes are using 50 GiB, then there is still 100 GiB committed to those volumes (150 GiB - 50 GiB). There is only 20 GiB of available pool space (70 GiB - 50 GiB). Because only 20 GiB of pool space is available, 80 GiB of the committed space cannot be allocated (100 GiB - 20 GiB). In this case, the percentage of committed space that cannot be allocated is 80% (80 GiB ÷ 100 GiB × 100).
This value is only available for pools with thin-provisioned volumes.
Storage Pool Assigned Volume Space (GiB)
The amount of space in the pool that is on volumes that are assigned to a server or storage virtualizer.
Storage Pool Unassigned Volume Space (GiB)
The amount of volume space in the pool that is not assigned to a server or storage virtualizer.
Storage Pool Total Volume Capacity (GiB)
The total storage space on all the volumes in a pool, which includes thin-provisioned and standard volumes. For thin-provisioned volumes, this value includes virtual space.
Storage Pool Allocated Space (GiB)
The amount of space that is reserved for all the volumes in a pool, which includes both thin-provisioned and standard volumes. The space that is allocated for thin-provisioned volumes is less than their virtual capacity, which is shown in the Storage Pool Total Volume Capacity (GiB) property. If a pool does not contain thin-provisioned volumes, this value is the same as the value in the Storage Pool Total Volume Capacity (GiB) property. This value is equal to the value in the Storage Pool Used Volume Space (GiB) property for the following resources:
  • Resources other than those that are running IBM Storage Virtualize and are configured as back-end storage
  • Resources that are running IBM Storage Virtualize, are configured as back-end storage, and are not thin-provisioned
Storage Pool Used Volume Space (GiB)
The amount of allocated space that is used by the volumes in a pool, which includes thin-provisioned and standard volumes.
For resources that are running IBM Storage Virtualize, you can preallocate thin-provisioned volume space when volumes are created. For these resources, the Storage Pool Used Space might be different than the Storage Pool Allocated Space for pools that contain thin-provisioned volumes. In other cases, the values for Storage Pool Used Space and Storage Pool Allocated Space are equal.
This value is accurate as of the most recent time that IBM Spectrum Control collected data about a volume. The value in this property might not be 100% accurate for the current state of volumes. This inaccuracy might occur because data collection is run on a set schedule and the used space on volumes can change rapidly.
Storage Pool Real Configured Space (GiB)
The amount of storage space that is in an XIV or IBM Storage Accelerate pool that has an associated soft size. The soft size of a pool is the virtual size of a thin-provisioned pool.
Storage Pool Real Available Space (GiB)
The amount of unused space that is in an XIV or IBM Storage Accelerate pool that has an associated soft size. The soft size of a pool is the virtual size of a thin-provisioned pool.
Storage Pool RAID Level
The RAID level of the resource, such as RAID 5 or RAID 10. The RAID level affects the performance and fault tolerance of the volumes that are allocated from the resource.
Storage Pool Is Thin Provisioned
Shows whether a pool, volume, or volume copy is thin-provisioned. If this value is Yes, the resource is thin-provisioned.
Storage Pool Is Solid State
Shows whether there are solid-state drives in the pool. This property can contain the following values:
Mixed
The pool contains both hard disk drives and solid-state drives.
Non solid state
The pool contains no solid-state drives.
Solid state
The pool contains a least one solid-state drive.
Storage Pool Number of MDisks
The number of managed disks in a storage pool.
Storage Pool Extent Size (MiB)
The size of the extent that was specified when a pool was created. Smaller extent sizes limit the maximum size of the volumes that can be created in a pool. Smaller extent sizes minimize the amount of potentially wasted space per volume.
This value is only available for resources that are running IBM Storage Virtualize and are configured as back-end storage.
Storage Pool Warning Level
The percentage of used capacity of the storage pool at which a warning is generated.
Storage Pool Repository Capacity (GiB)
The amount of space on all extents in the repository of a pool. This space can be used to allocate track space-efficient volumes. This attribute applies only to DS8000 storage systems.
Storage Pool Used Repository Space (GiB)
The amount of space on all extents in the repository of a pool that are allocated. This space can be used to allocate track space-efficient volumes. This attribute applies only to the DS8000 storage systems.

Report links

To open related reports, click the name of the storage pool and then click the name of the report. You can open the following related reports:

  • Pools Historical Capacity
  • Volumes Capacity