WLC Inspector

Edit online

The WLC Inspector widget shows various SNMP table data for the selected WLC. The data is retrieved from the WLC on-demand over SNMP and displayed by the WLC Inspector widget.

SNMP OID Dependencies to be reported by the end device

Cisco OIDs

OID Type Name
1.3.6.1.4.1.9.9.623.1.3.1.1.2 STRING AP Name
1.3.6.1.4.1.9.9.623.1.3.1.1.4 SPACED ENCODED IP AP Address
1.3.6.1.4.1.9.9.623.1.3.1.1.5 STRING Local Interface
1.3.6.1.4.1.9.9.623.1.3.1.1.6 STRING CDP AP Neighbor Name
1.3.6.1.4.1.9.9.623.1.3.1.1.8 SPACED ENCODED IP CDP AP Neighbor Address
1.3.6.1.4.1.9.9.623.1.3.1.1.9 STRING CDP AP Neighbor Interface
1.3.6.1.4.1.9.9.623.1.3.1.1.12 STRING Platform
1.3.6.1.4.1.9.9.623.1.3.1.1.13 STRING Capabilities
1.3.6.1.4.1.9.9.623.1.3.1.1.14 STRING Hold time left
1.3.6.1.4.1.9.9.623.1.3.1.1.15 CDP DUPLEX Duplex
1.3.6.1.4.1.9.9.623.1.3.1.1.16 CDP IF SPEED Interface Speed
1.3.6.1.4.1.14179.2.1.7.1.2 INTEGER bsnRogueAPTotalDetectingAPs
1.3.6.1.4.1.14179.2.1.7.1.3 STRING bsnRogueAPFirstReported
1.3.6.1.4.1.14179.2.1.7.1.4 STRING bsnRogueAPLastReported
1.3.6.1.4.1.14179.2.1.7.1.5 INTEGER bsnRogueAPContainmentLevel
1.3.6.1.4.1.14179.2.1.7.1.6 INTEGER bsnRogueAPType
1.3.6.1.4.1.14179.2.1.7.1.7 INTEGER bsnRogueAPOnNetwork
1.3.6.1.4.1.14179.2.1.7.1.8 INTEGER bsnRogueAPTotalClients
1.3.6.1.4.1.14179.2.1.7.1.10 INTEGER bsnRogueAPMaxDetectedRSSI
1.3.6.1.4.1.14179.2.1.7.1.11 STRING bsnRogueAPSSID
1.3.6.1.4.1.14179.2.1.7.1.13 SPACED MAC bsnRogueAPDetectingAPMacAddress
1.3.6.1.4.1.14179.2.1.7.1.24 INTEGER bsnRogueAPState
1.3.6.1.4.1.14179.2.1.7.1.25 INTEGER bsnRogueAPClassType
1.3.6.1.4.1.14179.2.1.7.1.26 INTEGER bsnRogueAPChannel
1.3.6.1.4.1.14179.2.1.7.1.27 STRING bsnRogueAPDetectingAPName

Aruba OIDs

OID Type Name
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.1 INTEGER monAPInfoPhyType
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.2 INTEGER monAPInfoCurrentChannel
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.3 INTEGER monAPInfoClassification
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.4 STRING monAPInfoESSID
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.5 INTEGER monAPInfoRSSI
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.6 STRING monAPInfoMonitorTime
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.7 STRING monAPInfoInactivityTime
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.8 INTEGER monAPInfoSnrSignalPkts
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.9 STRING monAPInfoSnrSampleTime
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.10 INTEGER monAPInfoStatus
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.11 INTEGER monAPInfoConfidence
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.12 INTEGER monAPInfoMatchType
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.13 INTEGER monAPInfoMatchMethod
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.14 INTEGER monAPInfoHTMode
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.15 INTEGER monAPInfoEncryptionType
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.16 INTEGER monAPInfoWPAUnicastCipher
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.17 INTEGER monAPInfoWPAAuthAlgorithm
1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.18 STRING monAPInfoIBSS

Data

Edit online

The Data tab enables you to select the resources to graph.

Cisco WLC Inspector Data

Perform the following steps to set the widget settings for Data tab.

  1. Click the Datasource drop-down and select the SevOne NMS cluster or appliance.
  2. Click the Device drop-down and select a device.
  3. Click Run to generate a WLC Inspector report based on the configuration.

    Example: CDP

    Cisco WLC Inspector Data Report
    Important: CDP is supported on Cisco Airespace only.

    Example: Rogue AP

    Cisco WLC Inspector Table Chart1
    Note: After generating a report
    Replace Untitled Report name with an appropriate report name. For example, WLC Inspector Report.

    Replace Untitled Section name with an appropriate name. For example, WLC Inspector.

Charts

Edit online

The Charts tab enables you to define how you want to display the report data.

Visualizations

Edit online

The charts provide Table visualization only.

Cisco WLC Inspector Charts

Table

Edit online

The Table visualization displays the data as a table. Perform the following steps to set the widget settings for the Table visualization.

  1. Select the Table visualizations by clicking Table visualization.
  2. TITLE
    1. Enable Show title to enter the title name in the text field provided and display it in report. Else, disable it.
    2. Enable Show subtitle to enter the sub-title name in the text field provided and display it in the report. Else, disable it.
  3. COLUMNS & CELLS
    1. Enable Show search bar to display search bar in the report. Else, disable it.
    2. Enable Allow column reordering to allow the columns that display in the report to be reordered.
    3. Enable Allow showing/hiding columns to allow columns in the report to be hidden and unhidden.
    4. Enable Wrap cell content to wrap long text in a data row so that all text displays. Leave clear to display as much text as fits into the cell with ellipses to indicate there is more text.
  4. COLUMN SELECTION
    • Select check boxes to display selected fields as data columns in the table. The names in the second column are names for columns that appear in the report. You may modify names in the second column to your choice.Cisco WLC Inspector Table Chart