AM messages

CSIAM0001E The property with key [property] that was specified in the request is not a tenant property.

Explanation

Action

Specify a valid tenant property and resubmit the request.

CSIAM0002E The JSON parser failed to parse the string into a JSON array because the accessControlAllowOrigin property value [value] that was specified in the request is not valid.

Explanation

The value must be a JSON array encoded as a string. The format of the JSON array is [{"regex":boolean, "origin":"string"}].

Action

Correct the format of the property value and resubmit the request.

CSIAM0003E The accessControlAllowOrigin property value for the origin [value] that was specified in the request is not a valid regular expression.

Explanation

The origin is specified as a regular expression in the request, however, the format of the regular expression is incorrect.

Action

Correct the expression and resubmit the request.

CSIAM0004E The accessControlAllowOrigin property value for the origin [value] that was specified in the request is not a valid domain name.

Explanation

The origin is specified as a domain name in the request, however, the domain name is not valid.

Action

Correct the domain name and resubmit the request.

CSIAM0005E The JSON parser failed to parse the string into a JSON array of JSON objects because the accessControlAllowOrigin property value [value] that was specified in the request is not formatted correctly.

Explanation

The value of the property must be a JSON array encoded as a string. The format of the JSON array is [{"regex":boolean, "origin":"string"}].

Action

Correct the format of the JSON array and resubmit the request.

CSIAM0006E No value was specified for the JSON property [value] that was specified in the request.

Explanation

The property must have a value and cannot be set to empty.

Action

Supply a value for the specified JSON property and resubmit the request.

CSIAM0007E The JSON property [value] for the value of the accessControlAllowOrigin property is missing from the request.

Explanation

Action

Specify the required property and resubmit the request.

CSIAM0008E No properties were specified in the request.

Explanation

The property attribute must have a value and cannot be set to empty.

Action

Supply at least one property name for the request and resubmit the request.

CSIAM0009E The user with the ID [value] is not enrolled in IBM Verify.

Explanation

You must enroll in IBM Verify before you can authenticate by using a TOTP to reset your password.

Action

Use the IBM Verify application to enroll the user in TOTP.

CSIAM0010E The transaction ID [value] is not valid.

Explanation

A valid transaction ID is required for the request.

Action

Supply a valid transaction id.

CSIAM0011E The authentication attempt failed.

Explanation

The authentication attempt failed. The one-time password specified in the request is not valid.

Action

None

CSIAM0012E The current step for transaction [value] is complete and cannot be validated again.

Explanation

The authentication attempt failed.

Action

None

CSIAM0013E The attempt to change the user's password failed. The transaction [value] has [number] steps remaining to verify the user's identity.

Explanation

The API requires that only one step remains to verify the user's identity before changing the user's password.

Action

None

CSIAM0014E The method [value] specified is not valid.

Explanation

A step to verify a user's identity contains a invalid method. Valid methods are emailotp, smsotp, totp

Action

Fix the request and try again.

CSIAM0015E We cannot recover your user name.

Explanation

The system tried to recover the user name, but could not find the user record.

Action

None.

CSIAM0016E Multiple user records were found with these attributes attributes.

Explanation

The system tried to recover the user name, but found more than one user record.

Action

None.

CSIAM0017E The user with ID value is not found.

Explanation

The system tried to validate a user's identity, but could not find the user record.

Action

None.

CSIAM0018E The system cannot recover the user name. The transaction [value] has [number] steps that remain to verify the user's identity.

Explanation

The API requires that only one step remains to verify the user's identity before the system recovers the user name.

Action

None

CSIAM0019E The attribute [value] is not found in the user schema.

Explanation

The attribute name that is used to lookup up the user record is not a recognized schema attribute name.

Action

Supply a valid attribute name in the request.

CSIAM0020E The system cannot use the TOTP method to verify the user's identity. The user is not enrolled in TOTP.

Explanation

The user must be enrolled in TOTP to use "totp" as the method for verification.

Action

None.

CSIAM0021E The system cannot use the SMS OTP method to verify the user's identity. The user does not have a mobile phone number.

Explanation

The user must have a mobile phone number to use "smsotp" as the method for verification.

Action

None.

CSIAM0022E The system cannot use the email OTP method to verify the user's identity. The user does not have an email address.

Explanation

The user must have an email address to use "emailotp" as the method for verification.

Action

None.

CSIAM0023E The authentication attempt failed. The transaction [transaction] has exceeded the allowable maximum attempts.

Explanation

The one-time password that was specified in the request is not valid and the maximum limit of login attempts was reached.

Action

None

CSIAM0024E Some required attribute(s) missing in request: attributeName.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0025E The value for attribute [attributeName] is invalid.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0026E Value for attribute {0} is {2}; it exceeds the maximum length {1}.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0027E Value for attribute {0} is {2}; it is less than the required minimum length {1}.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0028E The value {0} is not valid for {1}

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0029E Actual value {1} is not one of expected values {2} for attribute {0}

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0030E Cannot validate input JSON {0}.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0031E Input JSON type does not match for attribute {0}; expected {1} found {2}.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0032E The array is too short. The number of elements {2} in the array for attribute {0} is less than the minimum number of elements required: {1}.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0033E The array is too big. The number of elements {2} in the array for attribute {0} is greater than the maximum number of elements allowed: {1}.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0034E The value of the property with key [property] is not valid.

Explanation

Action

Specify a valid tenant property and resubmit the request.

CSIAM0035E The SMS Sender Identifier must only contain alphanumeric characters (A-Z,a-z,0-9), start with a letter, and has a maximum length of 11 characters.

Explanation

Action

Correct the format of the SMS Sender property and resubmit the request.

CSIAM0036E The Email Sender Address must be formatted as a valid email address and not more than maxLength characters in length.

Explanation

Action

Specify a valid email address for the Email Sender Address and resubmit the request.

CSIAM0037E The Email Sender Name has a maximum length of 255 characters.

Explanation

Action

Specify a valid sender email name and resubmit the request.

CSIAM0038E The rate limit is exceeded.

Explanation

The system limits the number of requests that can be made from an IP address, a tenant, and to a user during a specified time.

Action

Resubmit the request later.

CSIAM0039E The system cannot use the [methodName] method to verify the user's identity. The user is not enrolled.

Explanation

The user must be enrolled in IBM Verify to use signatures as the method for verification.

Action

None.

CSIAM0040E The system can't verify the user identity by using the [methodName] method.

Explanation

The user verification for fingerprint or user presence either failed or timed out.

Action

None.

CSIAM0041E The method of verification [methodName] is disabled.

Explanation

The method of verification has been disabled by the administrator.

Action

None.

CSIAM0042E The JSON parser failed to parse the string into a JSON array because the [property] property value [value] that was specified in the request is not valid.

Explanation

The value must be a JSON array encoded as a string. The format of the JSON array is [{"key":string, "value":"string"}].

Action

Correct the format of the property value and resubmit the request.

CSIAM0043E Session lifetime value [sessionLifetime] is not valid. Must be a number and between [minValue] and [maxValue] inclusive.

Explanation

The value of a session lifetime value is not valid.

Action

Correct the format of the property value and resubmit the request.

CSIAM0044E The system cannot use the email link method to verify the user's identity. The user does not have an email address.

Explanation

The user must have an email address to use "emailLink" as the method for verification.

Action

None.

CSIAM0045E The system cannot verify the user identity by using the [emailLink] method.

Explanation

The user verification for emailLink either failed or timed out.

Action

None.

CSIAM0046E Unable to process input JSON.

Explanation

When accepting a JSON payload as input, processing of the JSON failed.

Action

Validate that the input JSON is valid and submit the request again.

CSIAM0047E The value specified for [property] is not a valid URL.

Explanation

The value specified must be a valid URL.

Action

Check and correct the value for any errors, or supply another valid URL.

CSIAM0048E The value specified for days [days] must be one of these values validDays.

Explanation

The value that was specified for the days before password expired is not one of the supported values.

Action

Check and correct the value.

CSIAM0049E The value specified for days [days] already exists.

Explanation

The value that was specified for the days before password expired cannot be specified more than once.

Action

Check and remove one of the duplicated values.

CSIAM0050E The system cannot enable the notifications because the user passwords never expire. The password policy must specify a maximum age for password expiration.

Explanation

To enable notifications the password policy maximum age must be greater than 0.

Action

Check the password policy and correct the value.

CSIAM0051E The system cannot send an expiration warning after the password is expired. The value specified for days before expiration [days] must be less than the password maximum age [age].

Explanation

The value that was specified for the days before password expired exceeded the password maximum age that is defined in the password policy.

Action

Check the password policy and correct the value.

CSIAM0052E The email method step cannot be combined with other authentication steps.

Explanation

The email method is used to send an email directly to the user by using the username attribute. It cannot be combined with other steps to perform multi-factor authentication.

Action

None.

CSIAM0053E The system cannot find an identity source with the ID [{0}]. It might have been deleted.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0054E The identity source with ID [{0}] is disabled.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM0055E The identity source with the ID [{0}] is not a supported type.

Explanation

The identity source types that are supported are On Prem and Cloud Directory with the source IDs 5 and 16 respectively.

Action

None.

CSIAM0056E The system did not reset the password because password reset is disabled.

Explanation

Password reset is disabled for the identity source on the tenant.

Action

None.

CSIAM0057E The system could not verify the on-prem user because an incorrect verification method was used.

Explanation

The valid method for verifying an on-prem user's identity is emailLink.

Action

None.

CSIAM0058E The system could not reset the password for user [{0}]. The user is not active.

Explanation

The user must be active to reset their password.

Action

None.

CSIAM0059E The user name [{0}] for tenant [{1}] does not exist.

Explanation

A user with that username does not exist.

Action

None.

CSIAM0060E The user with ID [{0}] for tenant [{1}] does not exist.

Explanation

A user with that ID does not exist.

Action

None.

CSIAM0061E The system cannot use the Voice OTP method to verify the user's identity. The user does not have a mobile phone number.

Explanation

The user must have a mobile phone number to use "voiceotp" as the method for verification.

Action

None.

CSIAM0062E The system cannot find any users that match the filter [{0}].

Explanation

No users matched the specified filter.

Action

None.

CSIAM0063E The system cannot process the request because the value {0} is not a valid timestamp in milliseconds for the "reqFactorsConfigTimestamp" tenant property.

Explanation

The timestamp must in milliseconds past the EPOCH time and it cannot be a date in the past.

Action

Fix the value of the tenant property and resubmit the request.

CSIAM0064E The system cannot process the request because the value {0} for the "reqFactors" tenant property is not valid. The value must be a number from 0 to 10.

Explanation

Action

Fix the value of the tenant property and resubmit the request.

CSIAM0065E The system cannot process the request because the value {0} for the "reqFactorsGracePeriodInDays" tenant property is not valid. The value must be a number from 0 to 365

Explanation

Action

Fix the value of the tenant property and resubmit the request.

CSIAM0066E The system cannot process the request because the value {0} for the "reqFactorsForIDS" tenant property is not valid. The following identity source realms do not exist: {1}

Explanation

The tenant property value must contain a valid realm. If multiple realms are specified, they must be separated by a comma.

Action

Ensure that the tenant property contains valid realms and resubmit the request.

CSIAM0067E Parsing error: {2}

Explanation

The value returned in the response cannot be parsed.

Action

Submit the request again.

CSIAM1029E The system cannot create the "logDir" audit logging directory.

Explanation

The user might not have write access to the the audit logging directory location.

Action

Ensure that the user that the server runs as can write to the audit log location.

CSIAM1030E The audit service cannot create the audit logging directory because the value for "logDir" is a file name.

Explanation

The value must be a directory location.

Action

Change the file name to a directory location and resubmit the request.

CSIAM1034E The system cannot retrieve the health check.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1045E The system failed to retrieve path.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1048E The system cannot update path.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1050E The system cannot create path.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1052E The system cannot delete path.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1054E The system cannot retrieve the details for all the tenants.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1056E The system cannot retrieve the details for the tenant, "tenant".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1058E The system cannot update the tenant, "tenant".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1060E The system cannot create the tenant, "tenant".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1062E The system cannot delete the tenant, "tenant".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1064E The system cannot retrieve the tenant administrator, "admin".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1066E The system cannot retrieve the tenant administrators.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1068E The system cannot create the tenant administrator, "admin".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1070E The system cannot delete the tenant administrator, "admin".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1071E The identity source types are retrieved.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1072E The system cannot retrieve the identity source types.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1074E The system cannot email the token to the user, "user".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1076E The user's password was not changed.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1078E The token is not valid.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1080E The system cannot retrieve the tenant properties.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1082E The system cannot modify the tenant properties.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1084E The system cannot send the token to the, user "user".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1086E The system cannot reset the password for user "user".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1088E The system cannot validate the user's identity.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1090E The system cannot create the username recovery transaction. It cannot find the user's account by using the attribute, "attribute".

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1092E The user's username was not recovered.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.

CSIAM1093E The system cannot validate the user's identity.

Explanation

No additional information is available for this message.

Action

Consult the Maintenance and Problem Determination Guide for suggestions for assessing system health.