3300 Performance not optimised for configuration.

Explanation

A V9000 cluster can operate with the fibre queue switch set to ON or OFF. The optimum setting is determined automatically by the system based on whether you are managing any AE2 enclosures. If so, the switch must be ON for optimal performance. If the cluster detects that it is not in the correct performance mode, the 3300 error is displayed. This situation typically occurs when the fibre queue switch is manually changed by using the management GUI or the chenclosure command.

User response

Enter the following command for each node in the system, in turn, to restart the I/O process:
satask stopnode -warmstart

This command clears the error.