lstargetportfc
Use the lstargetportfc command to generate the list of host count and login count for each worldwide port names (WWPNs) required to set up Fibre Channel (FC) zoning and to display the current failover status of host IO ports.
Syntax
Parameters
- -delim delimiter
- (Optional) Specify a delimiter to separate data in the output.
- -nohdr
- (Optional) Suppress the headings in the output.
- -filtervalue attribute=value
- (Optional) Specifies a list of one or more filters. Only objects with a value that matches the filter attribute value are displayed.
- -filtervalue?
- (Optional) Displays a list of valid filter attributes.
Description
This command generates lists of worldwide port names (WWPNs) required to set up Fibre Channel (FC) zoning. This command also displays the current failover status of host I/O ports.
This table provides the attribute values that can be displayed as output view data.
| Attribute | Description |
|---|---|
| id | Indicates the ID of the port. |
| WWPN | Indicates the WWPN of the port. The value is hexadecimal. |
| WWNN | Indicates the worldwide node name (WWNN) of the port. The value is hexadecimal. |
| port_id | Indicates the system port ID. The value is the same as the
lsportfc
port_id field. |
| owning_node_id | Indicates the ID of the node that owns the port. Note: This node can be
offline whether the port is online or offline.
|
| current_node_id | Indicates the ID of the node on which this port is active. The value is blank if the port is not active on any node |
| nportid | Indicates the nportid hexadecimal value. |
| host_io_permitted | Indicates whether host I/O operations can run on the port. The values are
yes and no. |
| virtualized | Indicates whether it is a virtualized port. The values are
yes and no (which indicates that this port cannot be online on any
node other than the owning node). |
| protocol | Indicates the protocol supported by the port. The values are
scsi and nvme. Note: Some Fibre channel adapters and
platforms do not support NVMe over Fibre Channel.
|
| fc_io_port_id | Indicates the Fibre Channel IO port ID. |
| portset_count | Indicates the number of portsets the WWPN is added to. |
| host_count | Indicates the number of hosts configured through WWPN through the same portset. |
| active_login_count | Indicates the number of active login counts through WWPN. For a configured host, blocked login will not be included. |