These messages are provided by the secure reverse proxy component.
CTGSI0301E
Initialization of the distributed session cache server failed. (0x38c5812d)
CTGSI0302W
The client is not registered with the distributed session cache server. (0x38c5812e)
CTGSI0303E
The client is not authorized to perform the requested operation. (0x38c5812f)
CTGSI0304W
The concurrent session limit for the user has been reached. (0x38c58130)
CTGSI0305W
The client attempted to create a session with a session ID that is already in use. (0x38c58131)
CTGSI0306E
The client attempted to use a replica set that does not exist in the distributed session cache server configuration. (0x38c58132)
CTGSI0307E
The client attempted to perform an operation on a replica set that it has not joined. (0x38c58133)
CTGSI0308E
The client attempted to create or modify a session such that its concurrent session key would not be valid. (0x38c58134)
CTGSI0309W
The client's version of the session is out of date. (0x38c58135)
CTGSI0310W
The client specified a capability mask that does not match the active capability mask. (0x38c58136)
CTGSI0311E
The distributed session cache server was unable to generate a new key. (0x38c58137)
CTGSI0312W
The session was not found. (0x38c58138)
CTGSI0313E
A parameter value was not valid. (0x38c58139)
CTGSI0314E
The specified client instance ID has already been registered by another client. (0x38c5813a)
CTGSI0315E
The distributed session cache server encountered an error and was unable to complete the operation. (0x38c5813b)
CTGSI0316E
The client attempted to register using an active client name from a different IP address than was used to register the active instance. (0x38c5813c)
CTGSI0317W
The client attempted an idle timeout operation but the capabilities required to support idle timeouts have not been enabled. (0x38c5813d)
CTGSI0319E
The client issued a change session request with no session data changes. (0x38c5813f)
CTGSI0320E
The interface version requested by the client is not supported by this server. (0x38c58140)
CTGSI0321W
The distributed session cache server detected a conflict resulting from replication of the changes. (0x38c58141)
CTGSI0322E
An invalid request parameter was passed to the session administration interface. (0x38c58142)
CTGSI0323E
An unrecognized administration operation was passed to the distributed session cache server's administration interface. (0x38c58143)
CTGSI0324E
The request from the client requires a capability of the distributed session cache server that is not enabled by the distributed session cache server. (0x38c58144)
CTGSI0325E
The client attempted to use a session realm that does not exist in the distributed session cache server configuration. (0x38c58145)
CTGSI0327W
The distributed session cache server was not able to replicate the changes across the cluster. (0x38c58147)
CTGSI0328E
Authentication failed. You have used an invalid user name or password. (0x38c58148)
CTGSI0329E
Authentication failed. The account associated with the user has expired. (0x38c58149)
CTGSI0330E
Authentication failed. The credential associated with the user has expired. (0x38c5814a)
CTGSI0331W
The session limit for this session realm has been reached. (0x38c5814b)
CTGSM0301E
The new instance, %s, of the client, %s, could not be stored. (0x38c5c12d)
CTGSM0303E
The list of keys stored in the session list store, %s, for the replica set, %s, could not be retrieved. (0x38c5c12f)
CTGSM0304E
The session, %s, in the replica set, %s, does not have a concurrent session key. (0x38c5c130)
CTGSM0305E
The session, %s, in replica set, %s, could not be stored. (0x38c5c131)
CTGSM0306W
The session management server has rejected a session modification request from the client, %s, for the session, %s, in the replica set, %s, based on an outdated version of the session. The client has version number %s, while %s is the current version number. (0x38c5c132)
CTGSM0310W
The client, %s, is not registered. (0x38c5c136)
CTGSM0312E
A new instance of the client, %s, has attempted to start-up. The existing instance ID is %s, with the client ID of %s. The second instance ID is %s, with IP address %s. (0x38c5c138)
CTGSM0316E
Single sign-on was requested in session realm, %s, but there is no single sign-on mapping configured. (0x38c5c13c)
CTGSM0317E
An error occurred during statistics gathering setup: %s. (0x38c5c13d)
CTGSM0318E
Initialization of the event timer class, %s, failed: %s (0x38c5c13e)
CTGSM0319E
The database, %s, could not be opened. (0x38c5c13f)
CTGSM0321E
The event does not specify a session. (0x38c5c141)
CTGSM0322E
The session management server could not copy the file %s to %s: %s (0x38c5c142)
CTGSM0323E
The administration interface version, %s, requested by the client is not supported by the server. The server supports the following versions of the administration interface: %s. (0x38c5c143)
CTGSM0324W
J2EE security is disabled for this application server. No security checks will be performed by the session management server administration interface. (0x38c5c144)
CTGSM0325E
Unable to retrieve message text for message code {0}. (0x38c5c145)
CTGSM0326E
The file, %s, could not be deleted. (0x38c5c146)
CTGSM0327E
An error occurred during initialization of the class, %s, specified by property, %s: %s (0x38c5c147)
CTGSM0328E
An error occurred while replicating session management server data: %s (0x38c5c148)
CTGSM0329E
The session management server was not able to replicate an operation on the key, %s, in the map, %s. (0x38c5c149)
CTGSM0330E
The session management server instance was not able to establish communication with other instances in the cluster: %s. (0x38c5c14a)
CTGSM0332E
The session management server was not able to obtain a cluster-wide lock on the item, %s: %s (0x38c5c14c)
CTGSM0333E
The session management server was not able to release a lock on the item, %s: %s (0x38c5c14d)
CTGSM0334E
Transfer of existing session management server data to a new instance, %s, failed: %s. (0x38c5c14e)
CTGSM0335E
An error occurred while receiving session management server data from another instance: %s (0x38c5c14f)
CTGSM0336E
The replication operation message was badly formed. (0x38c5c150)
CTGSM0337E
Initialization of the event worker class, %s, failed: %s (0x38c5c151)
CTGSM0450E
An SQL error has occurred: %s (SQL error code: %s, SQL state: %s). (0x38c5c1c2)
CTGSM0451E
The JDBC driver could not be initialized: %s (0x38c5c1c3)
CTGSM0452E
The database table, %s, was not found. (0x38c5c1c4)
CTGSM0453E
The column, %s, in the database table, %s, was not found. (0x38c5c1c5)
CTGSM0454E
The column, %s, in the database table, %s, has the wrong type. The expected type is %s, but the type in the database is %s. (0x38c5c1c6)
CTGSM0457E
The column, %s, in the database table, %s, is not a primary key. (0x38c5c1c9)
CTGSM0458E
The column, %s, in the database table, %s, is not configured to use a foreign key. (0x38c5c1ca)
CTGSM0459E
The foreign key column, %s, in the database table, %s, imports its key from the table, %s, but it should import from the table, %s. (0x38c5c1cb)
CTGSM0460E
The foreign key column, %s, in the database table, %s, imports its key from the column, %s, but it should import from the column, %s. (0x38c5c1cc)
CTGSM0461E
The foreign key column, %s, in the database table, %s, uses the update rule, %s, but it should use the update rule, %s. (0x38c5c1cd)
CTGSM0462E
The foreign key column, %s, in the database table, %s, uses the delete rule, %s, but it should use the delete rule, %s. (0x38c5c1ce)
CTGSM0463E
No index was found for the column, %s, in the database table, %s. (0x38c5c1cf)
CTGSM0464E
The JDBC driver could not be initialized. (0x38c5c1d0)
CTGSM0602E
The session management server was not able to load the class %s: %s. (0x38c5c25a)
CTGSM0603E
The session management server was not able to create an instance of the class %s: %s. (0x38c5c25b)
CTGSM0604E
The session management server configuration specifies an illegal value for the %s property: %s. (0x38c5c25c)
CTGSM0617E
An unknown single sign-on mapping, %s, was specified for the session realm, %s. (0x38c5c269)
CTGSM0618E
The session management server was unable to identify the version of WebSphere application server. (0x38c5c26a)
CTGSM0619E
A Java class name is required to be specified in the session management server configuration by property %s. (0x38c5c26b)
CTGSM0620E
The Java class, %s, specified by property, %s, is not a valid session management server %s class. (0x38c5c26c)
CTGSM0622W
The session management server was unable to read the Tivoli Common Directory configuration file: %s (0x38c5c26e)
CTGSM0626E
An error occurred while reading the configuration file %s: %s (0x38c5c272)
CTGSM0627E
An error occurred while writing the configuration file %s: %s (0x38c5c273)
CTGSM0633W
The session management server was unable to access the Windows registry: %s (0x38c5c279)
CTGSM0634E
The session management server installation directory could not be determined: %s (0x38c5c27a)
CTGSM0637W
An error was encountered while reading output from the process, %s: %s (0x38c5c27d)
CTGSM0638E
The command, %s, run during session management server configuration has exceeded the time limit of %s seconds and has been terminated. (0x38c5c27e)
CTGSM0639E
An error was encountered while attempting to execute the command, %s, during session management server configuration: %s (0x38c5c27f)
CTGSM0640E
The directory, %s, could not be created. (0x38c5c280)
CTGSM0641E
An error was encountered while configuring the Tivoli Common Directory: %s (0x38c5c281)
CTGSM0642E
Activation of the session management server configuration MBean failed: %s (0x38c5c282)
CTGSM0644E
The session management server configuration application could not create a new WebSphere application server SSL configuration: %s (0x38c5c284)
CTGSM0645E
The session management server configuration application could not remove the WebSphere application server SSL configuration, %s: %s (0x38c5c285)
CTGSM0648E
Failed to access the WebSphere application server configuration service. (0x38c5c288)
CTGSM0649E
Failed to locate the WebSphere application server security configuration. (0x38c5c289)
CTGSM0651W
An error occurred while parsing the WebSphere application server configuration: %s (0x38c5c28b)
CTGSM0652E
An error occurred while retrieving the list of applications installed on the WebSphere application server: %s (0x38c5c28c)
CTGSM0653E
An error occurred while parsing the configuration of the application, %s: %s (0x38c5c28d)
CTGSM0654E
An error occurred while attempting to restart the application, %s: %s (0x38c5c28e)
CTGSM0659E
The deployment descriptor for the session management server application could not be located. (0x38c5c293)
CTGSM0663E
The session management server was not able to create an instance of the class %s. (0x38c5c297)
CTGSM0666E
The specified configuration session is not active. (0x38c5c29a)
CTGSM0667E
The session management server was not able to lock the distributed configuration: %s (0x38c5c29b)
CTGSM0668E
The session management server was not able to unlock the distributed configuration: %s (0x38c5c29c)
CTGSM0669E
The session management server was not able to retrieve the configuration state from other instances in the cluster: %s (0x38c5c29d)
CTGSM0670E
The session management server was not able to distribute the updated configuration across the cluster: %s (0x38c5c29e)
CTGSM0671E
The session management server was not able to distribute configuration result information across the cluster: %s (0x38c5c29f)
CTGSM0672E
The new configuration is based on a previous version of the configuration. The current configuration is version %d and the new configuration is version %d. (0x38c5c2a0)
CTGSM0673E
A component with the name %s already exists in the %s component set. (0x38c5c2a1)
CTGSM0674E
The component %s from component set %s failed to initialize: %s (0x38c5c2a2)
CTGSM0675E
The component %s was not found in the component set %s. (0x38c5c2a3)
CTGSM0676E
An unknown configuration component set identifier, %d, was specified. (0x38c5c2a4)
CTGSM0677E
The session realm, %s, cannot be removed because it still contains replica sets. (0x38c5c2a5)
CTGSM0678E
An unknown session realm name, %s, is specified in the configuration for the replica set, %s. (0x38c5c2a6)
CTGSM0679E
An attempt to process an SMS event failed: %s. (0x38c5c2a7)
CTGSM0750E
The SecureRandom algorithm, %s, could not be loaded: %s (0x38c5c2ee)
CTGSM0751E
The SecureRandom provider, %s, was not found: %s (0x38c5c2ef)
CTGSM0752E
The session management server was unable to determine the current key details. (0x38c5c2f0)
CTGSM0753E
The session management server was unable to find the key with ID: %s. (0x38c5c2f1)
CTGSM0754E
An error occurred while updating the key distribution information. The parameter, %s, could not be associated with the value: %s. (0x38c5c2f2)
CTGSM0755W
An error occurred while updating the key distribution information. The expired key, %s, could not be removed. (0x38c5c2f3)
CTGSM0901E
The session management server was not able to initialize the IBM Security Access Manager Runtime for Java: %s (0x38c5c385)
CTGSM0902W
An error occurred while accessing a IBM Security Access Manager credential: %s (0x38c5c386)
CTGSM0903W
The session, %s, does not contain a IBM Security Access Manager credential. (0x38c5c387)
CTGSM0904E
A configuration value required to configure the IBM Security Access Manager Runtime for Java is missing: %s. (0x38c5c388)
CTGSM0905E
Configuration of the IBM Security Access Manager Runtime for Java failed: %s (0x38c5c389)
CTGSM0906E
Unconfiguration of the IBM Security Access Manager Runtime for Java failed: %s (0x38c5c38a)
CTGSM0907E
An error was encountered while creating the key and trust store files used to authenticate clients of the session management server: %s (0x38c5c38b)
CTGSM0908E
IBM Security Access Manager integration has not been enabled for the session management server. (0x38c5c38c)
CTGSM0909E
The IBM Security Access Manager Runtime for Java is not currently available. (0x38c5c38d)
CTGSM0910W
The session, %s, does not contain a user UUID. (0x38c5c38e)
CTGSM1050E
Multiple values for the %s attribute of the %s session management server administration interface request were specified but no more than one value may be specified. (0x38c5c41a)
CTGSM1051E
The %s attribute of the %s session management server administration interface request must be an integer value - the %s value cannot be parsed as an integer. (0x38c5c41b)
CTGSM1052E
The %s attribute of the %s session management server administration interface request has a lower bound of %s - the value %s is too low. (0x38c5c41c)
CTGSM1053E
The %s attribute of the %s session management server administration interface request has an upper bound of %s - the value %s is too high. (0x38c5c41d)
CTGSM1054E
The required %s attribute of the %s session management server administration interface request was not provided by the client. (0x38c5c41e)
CTGSM1055E
The value (%s) of the %s attribute of the %s session management server administration interface request could not be processed. Error: %s. (0x38c5c41f)
CTGSM1059E
The session realm %s specified in a %s request of the session management server's administration interface is not recognized by the session management server. (0x38c5c423)
CTGSM1060E
The %s request failed with error: %s (0x38c5c424)
CTGSM1061E
The %s request caused an exception: %sException stack trace:%s (0x38c5c425)
CTGSM1062E
No HTTP request for administration service authorization. (0x38c5c426)
CTGSM1063E
The user %s is not permitted to delegate access to the administration service. (0x38c5c427)
CTGSM1064E
Unable to authorize access for the %s operation requiring the %s role for user %s delegated by user %s. (0x38c5c428)
CTGSM1065E
Authorization of user %s for role %s failed. %s exception: %s (0x38c5c429)
CTGSM1066E
The administration request type, %s, cannot be handled by class, %s, as specified by handler, %s, as it is already configured to be handled by the class, %s. (0x38c5c42a)
CTGSM1067E
Failed to locate the DSessAdmin request dispatcher. (0x38c5c42b)
CTGSM1363E
Validation of the last login information database table failed. (0x38c5c553)
CTGSM1369E
An error occurred while installing a component into the WebSphere application server runtime. The file, %s, could not be copied to the target location, %s. (0x38c5c559)
CTGSM1500W
The host name of this machine could not be determined. (0x38c5c5dc)
CTGSM1501E
User information is required to report an audit event but no session information is available. (0x38c5c5dd)
CTGSM1505W
The session creation time, %s, is in the future. Check time synchronization between SMS and client %s. (0x38c5c5e1)
CTGSM1506E
The auditing emitter configuration has been set to debug mode. Events will not be sent to a CARS emitter, they will be written to the log file. (0x38c5c5e2)
CTGSM1507E
The CARS Security Event Factory reported an error while constructing an event: %s (0x38c5c5e3)
CTGSM1509E
The CARS emitter reported an error while sending an event: %s (0x38c5c5e5)
CTGSM1514E
The common audit and reporting service (CARS) encountered a severe error when initializing: Error: %s, cause: %sError stack trace:%sCause stack trace:%s (0x38c5c5ea)
CTGSM1515E
The common auditing service encountered a severe error when shutting down: Error: %s, cause: %sError stack trace:%sCause stack trace:%s (0x38c5c5eb)
CTGSM1654E
The command line option, %s, is not recognized. (0x38c5c676)
CTGSM1655E
The %s command line option requires an argument. (0x38c5c677)
CTGSM1656E
The argument to the -list option must be a readable file. The value provided, %s, is not a readable file. (0x38c5c678)
CTGSM1657E
The file, %s, could not be opened: %s (0x38c5c679)
CTGSM1658W
Line %s of the list file %s, %s, cannot be interpreted. (0x38c5c67a)
CTGSM1659E
The file, %s, could not be backed up: %s (0x38c5c67b)
CTGSM1660E
The command, %s, could not be executed: %s (0x38c5c67c)
CTGSM1662E
The directory, %s, could not be created: %s (0x38c5c67e)
CTGSM1663E
An error occurred writing to the file, %s: %s (0x38c5c67f)
CTGSM1800E
The property, %s, which is required to configure the Java client API is missing. (0x38c5c708)
CTGSM1801E
A configuration value required to configure the Java client API is missing: %s. (0x38c5c709)
CTGSM1802E
The session management interface of any configured session management server could not be accessed. (0x38c5c70a)
CTGSM1803E
An internal error occurred within the Java client API: %s. (0x38c5c70b)
CTGSM1804E
The MAC algorithm, %s, could not be loaded: %s (0x38c5c70c)
CTGSM1805E
The provided session ID, %s, is invalid. (0x38c5c70d)
CTGSM1806E
The provided session ID, %s, was incorrectly formatted. (0x38c5c70e)
CTGSM1807E
A request was made to send a session which contained no data to the SMS. (0x38c5c70f)
CTGSM1950E
An exception occurred while performing a WebSphere eXtreme Scale data replication operation: %s (0x38c5c79e)
CTGSM1951E
The session management server was unable to initialize the WebSphere eXtreme Scale data replication service. (0x38c5c79f)
CTGSM1952E
Initialization of the WebSphere eXtreme Scale data replication service failed: %s (0x38c5c7a0)
CTGSM1954E
An exception occurred during a remote WebSphere eXtreme Scale operation on server %s: %s (0x38c5c7a2)
DPWAD0309E
The WebSEAL administration service has not been initalized. (0x38983135)
DPWAD0376E
The restore operation failed for %s (0x38983178)
DPWAD0386E
Failed to open the supplied junction archive file. (0x38983182)
DPWAD0387E
The supplied junction archive file contains an invalid junction definition. (0x38983183)
DPWAD0391W
Failed to execute the program (%s). (Errno = %d). (0x38983187)
DPWAD0394W
The requested file segment contained binary characters. (0x3898318a)
DPWAD0404E
Failed to locate the authorization server password, required for the server sync command. (0x38983194)
DPWAD0405E
Failed to synchronize the WebSEAL server. (0x38983195)
DPWAD0406E
The server name supplied was not valid. (0x38983196)
DPWAD0411E
The TCP/IP host information could not be determined from the server hostname: %s. Ensure that the server hostname is correct and that the domain name server is functioning correctly. (0x3898319b)
DPWAD0412E
The configuration entry found within the %s stanza was not valid: %s = %s. (0x3898319c)
DPWAD0413E
An attempt to create a temporary file failed. (0x3898319d)
DPWAD0415E
An ICAP Server for the '%s' resource was not found. (0x3898319f)
DPWAD0416E
An ICAP Server for the specified resource was not found. (0x389831a0)
DPWAD0417E
A bad response was received from the ICAP server. (0x389831a1)
DPWAD0418E
Failed to connect to the ICAP server: %s. (0x389831a2)
DPWAD0419E
Failed to connect to a required ICAP server. (0x389831a3)
DPWAD0420E
The maximum number of concurrent requests which can be processed for this session has been reached. (0x389831a4)
DPWAD0421W
The session, owned by %s, has reached it's soft limit of %d concurrent requests. (0x389831a5)
DPWAD0431E
Failed to locate the authorization server password, required for the cluster functionality. (0x389831af)
DPWAD0432E
Failed to execute the server task '%s' on %s: %s (0x389831b0)
DPWAD0433E
Failed to execute a server task command (0x389831b1)
DPWAD0434E
Failed to create the administration context for %s: %s (0x389831b2)
DPWAD0435E
Failed to create an administration context (0x389831b3)
DPWAD0436E
An unexpected result was received from the server task command: %s (%s) (0x389831b4)
DPWAD0438E
Failed to synchronize with the cluster master (0x389831b6)
DPWAD0439E
Failed to restart the cluster (0x389831b7)
DPWAD0440E
Failed to restart the cluster: 0x%lx (0x389831b8)
DPWAD0441E
Failed to restart the cluster as a cluster restart is already in progress (0x389831b9)
DPWAD0442E
The server, %s, failed to restart within a reasonable period of time. (0x389831ba)
DPWAD0446E
Both the '-ripple' and '-status' options cannot be specified at the same time. (0x389831be)
DPWAD0447E
The server is not fully initialized. (0x389831bf)
DPWAD0448E
The new user identity (%s) does not match the current authenticated user identity (%s). (0x389831c0)
DPWAD0449E
The new user identity does not match the current authenticated user identity. (0x389831c1)
DPWAD0452E
eCSSO authentication is enabled but no Master Authorization Server is defined. (0x389831c4)
DPWAD0453E
Duplicate eCSSO domain '%s' defined under the [e-community-domains] stanza. (0x389831c5)
DPWAD0454E
Unable to configure the eCSSO authentication module for domain/host '%s': status 0x%lx. (0x389831c6)
DPWAD0455E
The value '%s' is not a valid option for ip-support-level. Use one of 'displaced-only', 'generic-only', or 'displaced-and-generic'. (0x389831c7)
DPWAD0456E
The value displaced-only is not a valid option for ip-support-level when ipv6-support is enabled. (0x389831c8)
DPWAD0457E
The authentication challenge type specified is not valid: %s (0x389831c9)
DPWAD0458E
The corresponding authentication method for the challenge type, %s, is not enabled. (0x389831ca)
DPWAD0459E
The authentication challenge type contains multiple entries for %s. (0x389831cb)
DPWAD0460E
The following authentication challenge type contains a syntax error or invalid pattern.%s (0x389831cc)
DPWAD0600E
An error occurred attempting to determine the current installed version of WebSEAL. WebSEAL cannot start. (0x38983258)
DPWAD0601E
The version string '%s' is invalid. (0x38983259)
DPWAD0602E
An error occurred attempting to determine the originally installed version of WebSEAL to verify that the configuration file is up-to-date. WebSEAL cannot start. (0x3898325a)
DPWAD0603E
An error occurred attempting to backup the configuration file. (0x3898325b)
DPWAD0604E
An error occurred attempting to restore the configuration file. (0x3898325c)
DPWAD0605W
The configuration file entry [%s]%s was not found. (0x3898325d)
DPWAD0606E
An error occurred attempting to migrate the configuration file entry [%s]%s. (0x3898325e)
DPWAD0607E
An error occurred attempting to migrate the configuration file entry [%s]. (0x3898325f)
DPWAD0611E
A serious error occurred performing configuration file migration. You may need to perform manual migration of some configuration options. (0x38983263)
DPWAD0752E
A replica set must be specified for the virtual host junction '%s'. (0x389832f0)
DPWAD0753E
A replica set must be specified for the junction. (0x389832f1)
DPWAD0754E
The Virtual Host junction '%s' must have an eCSSO domain key in the configuation file for it's virtual host name '%s'. (0x389832f2)
DPWAD0755E
The Virtual Host junction must have an eCSSO domain key in the configuration file for it's virtual host name. (0x389832f3)
DPWAD0756W
The junction reload command did not complete for regular junctions as a previous reload is still in effect. Try again later. (0x389832f4)
DPWAD0757W
The junction reload command did not complete for Virtual Host junctions as a previous reload is still in effect. Try again later. (0x389832f5)
DPWAD0782E
Could not take junction offline (0x3898330e)
DPWAD0783E
Could not take Virtual Host junction offline (0x3898330f)
DPWAD0784E
Could not throttle junction (0x38983310)
DPWAD0785E
Could not throttle Virtual Host junction (0x38983311)
DPWAD0786E
Could not bring junction online (0x38983312)
DPWAD0787E
Could not bring Virtual Host junction online (0x38983313)
DPWAD0788E
You can only change the operation state of TCP, SSL, TCP Proxy, and SSL Proxy junctions. (0x38983314)
DPWAD0789E
You can only change the operation state of TCP, SSL, TCP Proxy, and SSL Proxy Virtual Host junctions. (0x38983315)
DPWAP0023E
The file, %s, contains data which is not valid at line %d. (0x3898f017)
DPWAP0024E
An error occured in the %s system function: 0x%x (0x3898f018)
DPWAP0025E
An error occured while executing the system call: %s (0x%x) (0x3898f019)
DPWAP0026E
The file, %s, cannot be opened (0x%x) (0x3898f01a)
DPWAP0028E
The '%s' configuration entry, in the [%s] stanza, is a read only configuration entry and should not be modified. (0x3898f01c)
DPWAP0029E
A read only configuration entry was supplied. (0x3898f01d)
DPWAP0031E
The process, %s, was terminated by the signal, %d. The process will be automatically restarted. (0x3898f01f)
DPWAP0032E
Failed to stop the %s process (pid: %d). (0x3898f020)
DPWAP0033E
The %s operation for the ldap server, %s:%d, failed: (%s). (0x3898f021)
DPWAP0034E
Cannot obtain a unique DN for the user: %s. (0x3898f022)
DPWAP0035E
An error occured while executing the command: %s (0x%x) %s (0x3898f023)
DPWAP0036E
The directory, %s, does not exist. (0x3898f024)
DPWAP0037E
A file or directory which is not valid was encountered: %s (0x3898f025)
DPWAP0038E
The following files already exist: %s (0x3898f026)
DPWAP0039E
An error occured in the %s system function: %s (0x3898f027)
DPWAP0045E
Invalid configuration for the %s notifications module. Reverting to default values. (0x3898f02d)
DPWAP0046E
An error occurred while executing an SQL statement at %s:%d. (%d:%s) (0x3898f02e)
DPWAP0047E
The requested configuration data was not found. (0x3898f02f)
DPWAP0048E
An ICC toolkit failure occurred while calling %s. Error: %s. (0x3898f030)
DPWAP0049E
An ICC toolkit failure occurred while calling %s. No further details are known. (0x3898f031)
DPWAP0050E
The library, %s, cannot be opened: %s (0x3898f032)
DPWAP0051E
An error occured while executing the system call: %s (0x%x) %s (0x3898f033)
DPWAP0053E
Failed to write to the file, %s (0x%x) (0x3898f035)
DPWAP0054E
The database is not yet available. (0x3898f036)
DPWAP0058E
The command, '%s', did not complete within the allotted time. (0x3898f03a)
DPWAP0059E
The supplied authorization server name, %s, is not a known server. (0x3898f03b)
DPWAP0060E
The specified authorization server, %s, could not be deleted. (0x3898f03c)
DPWAP0061E
The server certificate could not be retrieved from %s at port %s. (0x3898f03d)
DPWAP0064E
Incorrect usage for the mesa_config %s command. (0x3898f040)
DPWAP0065E
A path which is not valid has been specified. (0x3898f041)
DPWAP0066E
Failed to copy the file (error code: %d). (0x3898f042)
DPWAP0067E
Authorization for the requested command has been denied. (0x3898f043)
DPWAP0068E
The IBM Security Access Manager runtime environment is not configured. (0x3898f044)
DPWAP0069E
A web reverse proxy instance with the name %s has already been configured. (0x3898f045)
DPWAP0070E
The runtime environment has already been configured. (0x3898f046)
DPWAP0071E
The supplied file name, %s, must have a file extension of '%s'. (0x3898f047)
DPWAP0072E
The key database, %s, does not exist. (0x3898f048)
DPWAP0073E
An IP address which is not valid was located in the supplied entry: %s (0x3898f049)
DPWAP0074E
A matching interface was not found. (0x3898f04a)
DPWAP0075E
The %s parameter is required. (0x3898f04b)
DPWAP0076E
The supplied starting value of %ld is larger than the number of lines contained in the file (%ld) (0x3898f04c)
DPWAP0077E
An incorrect range was specified. The starting value (%ld) must be less than the ending value (%ld) (0x3898f04d)
DPWAP0078E
The pending changes cannot be committed as conflicts have been discovered between the staged and production files. (0x3898f04e)
DPWAP0079E
The IP address, %s, is already in use. (0x3898f04f)
DPWAP0080E
The %s interface is not a configured interface. (0x3898f050)
DPWAP0081E
One or more instances of the Web reverse proxy is still configured. These instances must be unconfigured first. (0x3898f051)
DPWAP0087E
An incorrect user name or password has been supplied. (0x3898f057)
DPWAP0088E
Examine the log of the Web Reverse Proxy instance for further information on the failure. (0x3898f058)
DPWAP0090E
The key database, %s, already exists. (0x3898f05a)
DPWAP0091E
The requested operation cannot proceed as there are pending changes which first need to be committed. (0x3898f05b)
DPWAP0092E
The configuration file for the %s instance is missing from the migration zip file. (0x3898f05c)
DPWAP0093E
An invalid filter rule was specified (%s) (0x3898f05d)
DPWAP0094E
The specified maximum file size exceeds the available space of %ld MB. (0x3898f05e)
DPWAP0095E
The system is already capturing network packets. The current capture operation must be stopped before the requested operation can be completed. (0x3898f05f)
DPWAP0096E
A packet capture file already exists on the system. The current file must be deleted before a new capture operation can be started. (0x3898f060)
DPWAP0097E
The maximum capture file size has been reached. (0x3898f061)
DPWAP0098W
The log file, %s, has been automatically purged from the system. (0x3898f062)
DPWAP0099E
A management interface has already been configured with the same IP address: %s. (0x3898f063)
DPWAP0100E
An invalid activation code has been supplied. (0x3898f064)
DPWAP0102E
The server failed to start correctly. (0x3898f066)
DPWAP0104E
The server could not be stopped. (0x3898f068)
DPWAP0105E
The command is not supported with the current configuration. (0x3898f069)
DPWAP0108E
The supplied database name, %s, does not match any known databases. (0x3898f06c)
DPWAP0109E
The user identity for the local database cannot be modified after the database has been created. (0x3898f06d)
DPWAP0110E
The database, %s, is not currently enabled. (0x3898f06e)
DPWAP0111E
Failed to obtain the state of the specified database: %s. (0x3898f06f)
DPWAP0112E
The server has already been started. (0x3898f070)
DPWAP0113E
The cluster signature file could not be created. (0x3898f071)
DPWAP0114E
The cluster signature file could not be validated. (0x3898f072)
DPWAP0115E
The cluster master cannot currently be reached, and must be reachable in order to complete the operation. (0x3898f073)
DPWAP0116W
The specified node cannot currently be reached. (0x3898f074)
DPWAP0117E
The database server failed to start within the allocated time. (0x3898f075)
DPWAP0118W
The specified node, %s, is not a member of the cluster. (0x3898f076)
DPWAP0119E
A cluster master cannot be deregistered from the cluster. (0x3898f077)
DPWAP0120E
A cluster must be defined before this request can be processed. To define a cluster the primary master must be set to something other than 127.0.0.1. (0x3898f078)
DPWAP0121E
The port which has been specified for the cluster cannot be used because another service is already using one of the range of required ports. (0x3898f079)
DPWAP0122E
The signature file could not be created. (0x3898f07a)
DPWAP0123E
The signature file could not be validated. (0x3898f07b)
DPWAP0124E
The supplied signature file is not compatible with the local server. (0x3898f07c)
DPWAP0125E
One or more Authorization server instances are still configured. These instances must be unconfigured first. (0x3898f07d)
DPWAP0126W
Failed to attach the ACL which is used to allow unauthenticated access to the favicon.ico resource. (0x3898f07e)
DPWAP0127E
The operation is not permitted on this key database. (0x3898f07f)
DPWAP0128E
The file, %s, cannot be removed as it is still in use. (0x3898f080)
DPWBA0300W
A general error occurred: %s. (0x36a6812c)
DPWBA0303E
A required configuration entry, %s, under the %s stanza is missing from the configuration file. (0x36a6812f)
DPWBA0304E
Unable to determine whether the IBM Security Access Manager policy needs to be applied: 0x%x. (0x36a68130)
DPWBA0305E
Initialization of cluster manager failed: 0x%x. (0x36a68131)
DPWBA0306E
Failed to add cluster to cluster manager: 0x%x. (0x36a68132)
DPWBA0307W
The stanza %s in file %s is not found. (0x36a68133)
DPWBA0308W
The header key name is missing for the app_context_data key: %s (0x36a68134)
DPWBA0309W
The authentication level is missing for the obligation: %s. (0x36a68135)
DPWBA0310W
An error occurred when trying to retrieve the obligation ID from the runtime security services response. (0x36a68136)
DPWBA0311W
Unable to contact runtime security services. (0x36a68137)
DPWBA0312W
The %s attribute could not be extracted from a credential: API error: %s (API error code [%x:%x]). (0x36a68138)
DPWBA0313E
An error occurred when attempting to communicate with the SOAP server URL %s: %s (error code: %d/0x%x). (0x36a68139)
DPWCA0911E
Could not find host name or IP address of ITIM server in the ITIM CDAS configuration file. (0x389d038f)
DPWCA0912E
Could not find KeyDataBase in the ITIM CDAS configuration file. (0x389d0390)
DPWCA0913E
Could not find KeyDataBase Password in the ITIM CDAS configuration file. (0x389d0391)
DPWCA0914E
Could not find Source DN in the ITIM CDAS configuration file. (0x389d0392)
DPWCA0915E
Could not find ITIM Principal Name in the ITIM CDAS configuration file. (0x389d0393)
DPWCA0916E
Could not find ITIM Principal Password in the ITIM CDAS configuration file. (0x389d0394)
DPWCA0917E
Could not find ITIM message header. (0x389d0395)
DPWCA0922E
The password could not be changed in ITIM. The password has beeen changed in ISAM. (0x389d039a)
DPWCF0450E
The IBM Security Access Manager Runtime installation directory could not be found. Install IBM Security Access Manager Runtime. (0x389d51c2)
DPWCF0451E
The IBM Security Access Manager WebSEAL installation directory could not be found. Install IBM Security Access Manager WebSEAL. (0x389d51c3)
DPWCF0452E
The configuration file '%s' could not be opened. (0x389d51c4)
DPWCF0453E
The file '%s' could not be opened. Error code: %d (0x389d51c5)
DPWCF0454E
The file '%s' could not be closed. Error code %d. (0x389d51c6)
DPWCF0455E
The directory '%s' could not be opened. Error code: %d (0x389d51c7)
DPWCF0456E
The directory '%s' could not be closed. Error code: %d (0x389d51c8)
DPWCF0457E
The instance name '%s' is already in use. (0x389d51c9)
DPWCF0458E
The length of the instance name '%s' is more than %d characters. (0x389d51ca)
DPWCF0459E
The instance name '%s' contains invalid characters. Instance names must consist of alphanumeric characters plus the symbols: '-' '_' '.' (0x389d51cb)
DPWCF0460E
The IP address '%s' does not exist in the system. (0x389d51cc)
DPWCF0461E
The key file '%s' does not exist in the system. (0x389d51cd)
DPWCF0462E
The key file password is incorrect. (0x389d51ce)
DPWCF0463E
The LDAP server could not be contacted through SSL on port %d. (0x389d51cf)
DPWCF0464E
The key file for SSL communcation with the LDAP server is invalid. (0x389d51d0)
DPWCF0465E
SSL environment could not be opened. Error: %s. (0x389d51d1)
DPWCF0466E
Port '%s' is already in use. (0x389d51d2)
DPWCF0467E
Fields marked with an asterisk (*) are required. (0x389d51d3)
DPWCF0468E
The Policy Server could not be contacted. Make sure the Policy Server is running and try again. (0x389d51d4)
DPWCF0469E
The file '%s' could not be copied to '%s' (0x389d51d5)
DPWCF0470E
The directory '%s' could not be copied to the directory '%s'. (0x389d51d6)
DPWCF0471E
The directory '%s' could not be created. (0x389d51d7)
DPWCF0472E
The random password could not be generated. (0x389d51d8)
DPWCF0473E
The WebSEAL instance '%s' failed to configure. (0x389d51d9)
DPWCF0474E
The WebSEAL instance '%s' failed to unconfigure. (0x389d51da)
DPWCF0475E
The specified document root directory '%s' does not exist. (0x389d51db)
DPWCF0476E
The specified option '%s' is invalid. (0x389d51dc)
DPWCF0477E
The specified option '%s' needs a parameter. (0x389d51dd)
DPWCF0478E
The action option needs to be specified. (0x389d51de)
DPWCF0479E
The specified certificate label '%s' is invalid. (0x389d51df)
DPWCF0480E
The response file '%s' could not be opened. (0x389d51e0)
DPWCF0481E
The instance name '%s' does not exist to unconfigure. (0x389d51e1)
DPWCF0482E
Could not determine the hostname of the machine. Error code: %d (0x389d51e2)
DPWCF0483E
The entry '%s' in the response file does not have a value (0x389d51e3)
DPWCF0484E
Error: the configuration program must be run as root. (0x389d51e4)
DPWCF0485E
The ownership of '%s' cannot be changed to user ivmgr, group ivmgr. Error code: %d. (0x389d51e5)
DPWCF0486E
Could not create symbolic link from '%s' to '%s'. Error code: %d. (0x389d51e6)
DPWCF0487E
The hash table for configuration options cannot be initialized. (0x389d51e7)
DPWCF0488E
The file '%s' could not be moved to '%s' (0x389d51e8)
DPWCF0489E
ERROR: For WebSEAL to function correctly the maximum number
of threads per process should be at least 96. This value
can be increased by modifying the MAXTHREADPROC or
MAX_THREAD_PROC kernel parameter through the sam utility. (0x389d51e9)
DPWCF0490E
The configuration status could not be set. (0x389d51ea)
DPWCF0491E
The file '%s' could not be deleted. Error code: %d. (0x389d51eb)
DPWCF0492E
The socket could not be created. Error code: %d (0x389d51ec)
DPWCF0493E
The -interactive option is not supported on this platform. (0x389d51ed)
DPWCF0494E
The executable file 'ldapsearch' could not be found. (0x389d51ee)
DPWCF0495E
The configuration value of an entry [%s] '%s' could not be retrieved from the configuration file '%s'. (0x389d51ef)
DPWCF0496E
The user '%s' does not have permission to unconfigure the server. (0x389d51f0)
DPWCF0497E
The response file '%s' does not exist. (0x389d51f1)
DPWCF0498E
The user '%s' could not be removed from the group '%s'. Error message: '%s' (0x389d51f2)
DPWCF0499E
The objectspace '%s' could not be created. Error message: '%s' (0x389d51f3)
DPWCF0500E
The ACL '%s' could not be created with an error: '%s' (0x389d51f4)
DPWCF0501E
The description of ACL '%s' could not be set to '%s'. Error message: '%s' (0x389d51f5)
DPWCF0502E
The permissions for group '%s' in the ACL '%s' could not be set. Error message: '%s' (0x389d51f6)
DPWCF0503E
The permissions for user '%s' in the ACL '%s' could not be set. Error message: '%s' (0x389d51f7)
DPWCF0504E
The permissions for anyother in the ACL '%s' could not be set. Error message: '%s' (0x389d51f8)
DPWCF0505E
The permissions for unauthenticated in the ACL '%s' could not be set to '%s'. Error message: '%s' (0x389d51f9)
DPWCF0506E
The ACL '%s' could not be attached to the protected object '%s'. Error message: '%s' (0x389d51fa)
DPWCF0507E
The protected object '%s' could not be created. Error message: '%s' (0x389d51fb)
DPWCF0508E
The protected object '%s' could not be deleted. Error message: '%s' (0x389d51fc)
DPWCF0509E
The group '%s' could not be retrieved. Error message: '%s' (0x389d51fd)
DPWCF0510E
The group '%s' could not be created. Error message: '%s' (0x389d51fe)
DPWCF0511E
The descript for group '%s' could not be set to '%s'. Error message: '%s' (0x389d51ff)
DPWCF0512E
The DN of the group '%s' could not be retrieved. Error message: '%s' (0x389d5200)
DPWCF0513E
The directory '%s' could not be deleted. (0x389d5201)
DPWCF0514E
The ivadmin context could not be created. Error message '%s'. Use pdadmin to manually create 'su-admins' and 'su-excluded' groups as instructed in the appendix of WebSEAL upgrade document. (0x389d5202)
DPWCF0515E
Use pdadmin to manually create 'su-admins' or 'su-excluded' groups as instructed in the appendix of WebSEAL upgrade document. (0x389d5203)
DPWCF0516E
The tivoli_common_dir entry in the log.properties file has an empty value. (0x389d5204)
DPWCF0517E
The log.properties file does not exist. (0x389d5205)
DPWCF0518E
Failed to create Tivoli Common Directory for WebSEAL. (0x389d5206)
DPWCF0519E
Failed to relocate Tivoli Common Directory for WebSEAL. (0x389d5207)
DPWCF0520E
The '%s' option must be provided on the command line. (0x389d5208)
DPWCF0521E
The '%s' option only uses 'y' or 'n' for its parameter. (0x389d5209)
DPWCF0522E
The administrator ID or password is invalid. (0x389d520a)
DPWCF0523E
The request-log-format entry in the logging stanza contains an invalid directive: %s (0x389d520b)
DPWCF0524E
The request-log-format entry in the logging stanza contains an invalid parameter for a directive. (0x389d520c)
DPWCF0525W
The ping-method value of '%s' is not a valid ping-method, defaulting to HEAD. (0x389d520d)
DPWCF0527W
The configuration item (%s, %s) is missing, defaulting to a value of: '%s'. (0x389d520f)
DPWCF0528W
The configuration file entry encountered is not valid. (0x389d5210)
DPWCF0529E
Domain cookies cannot be shared when the session management server has been configured. (0x389d5211)
DPWCF0530E
A login redirect page cannot be specified when JavaScript redirection is enabled. (0x389d5212)
DPWCF0531E
The configured single sign-off resource is invalid. The resource must reside on a standard junction. (0x389d5213)
DPWCF0532E
The configured list of user-agent patterns will not match all user-agent strings. The list must contain a match-all pattern. (0x389d5214)
DPWCF0533E
The [user-agents] stanza must be configured when flow data is enabled. (0x389d5215)
DPWDS0150E
An attempt to create a UUID has failed with the following error: %s (error code: 0x%x) (0x38a0a096)
DPWDS0151E
An attempt to retrieve the machine address code (MAC) failed: %s (error code: 0x%lx) (0x38a0a097)
DPWDS0152E
Memory could not be allocated. (0x38a0a098)
DPWDS0153E
No more entries were found in the specified list. (0x38a0a099)
DPWDS0154E
An invalid number was supplied. (0x38a0a09a)
DPWDS0155E
The number which was supplied is too large. (0x38a0a09b)
DPWDS0157E
The %s system routine failed: system error code: %d (0x38a0a09d)
DPWDS0158E
The requested data is not available. (0x38a0a09e)
DPWDS0159E
A command line option was not of the correct format. (0x38a0a09f)
DPWDS0160E
The supplied configuration data was not valid. (0x38a0a0a0)
DPWDS0161E
The command line option, -%s, is not valid. (0x38a0a0a1)
DPWDS0162E
A binary has been executed with incorrect arguments. (0x38a0a0a2)
DPWDS0163W
The '%s' parameter of the command is invalid. (0x38a0a0a3)
DPWDS0164W
An invalid command parameter was supplied. (0x38a0a0a4)
DPWDS0165E
Could not open file %s (system error code: %d). (0x38a0a0a5)
DPWDS0166E
The configuration file could not be opened. (0x38a0a0a6)
DPWDS0167E
Expected configuration data could not be located in the configuration file. (0x38a0a0a7)
DPWDS0168E
The %s stanza of %s requires specification of the %s configuration parameter. (0x38a0a0a8)
DPWDS0169E
Could not open configuration file '%s' due to error: '%s'. (0x38a0a0a9)
DPWDS0300E
The distributed session cache client failed to initialized. (0x38a0a12c)
DPWDS0301E
A general failure has occured within the distributed session cache client. (0x38a0a12d)
DPWDS0302E
A replica set which is unknown to the distributed session cache client has been supplied (%s). (0x38a0a12e)
DPWDS0303E
A replica set which is unknown to the distributed session cache client has been supplied. (0x38a0a12f)
DPWDS0304E
The requested version %d of the session key was not found for replica %s in replica set %s. (0x38a0a130)
DPWDS0305E
The requested key was not found. (0x38a0a131)
DPWDS0306E
No session keys are currently available. (0x38a0a132)
DPWDS0307E
An error occurred when attempting to communicate with the SOAP server URL %s: %s (error code: %d/0x%x). (0x38a0a133)
DPWDS0309E
An error was returned from the SOAP server in cluster %s when calling the %s interface: %s (code: 0x%x). (0x38a0a135)
DPWDS0310E
An invalid key size was returned by the distributed session cache server: %d, whereas it should be: %d. (0x38a0a136)
DPWDS0311E
An incorrect key version was returned by the distributed session cache server to replica %s in replica set %s: %d, whereas it should be: %d. (0x38a0a137)
DPWDS0312E
The distributed session cache server could not be reached. (0x38a0a138)
DPWDS0314E
The cryptographic routine, %s, failed. (0x38a0a13a)
DPWDS0315W
An invalid session key was provided to the distributed session cache server client. (0x38a0a13b)
DPWDS0316E
The distributed session cache server did not return a response. (0x38a0a13c)
DPWDS0319E
The distributed session cache server client attempted to join the replica set '%s' twice with the replica name '%s'. (0x38a0a13f)
DPWDS0320E
The DN contained within the server certificate, %s, is not recognised by replica %s in replica set %s. (0x38a0a140)
DPWDS0321E
The replica %s in replica set %s does not have permission to access the distributed session cache server. (0x38a0a141)
DPWDS0322E
The distributed session cache server for the replica set, %s, of the replica, %s, could not be reached. (0x38a0a142)
DPWDS0323E
No session keys are currently available for replica %s in replica set %s. (0x38a0a143)
DPWDS0450E
Error parsing STS response element line %d, column %d: '%s'. The element text was '%s'. (0x38a0a1c2)
DPWDS0451E
Unable to parse timestamp '%s' (0x38a0a1c3)
DPWDS0452E
Unable to parse timestamp. (0x38a0a1c4)
DPWDS0453E
The STS response did not contain the element '%s' (0x38a0a1c5)
DPWDS0454E
The STS response did not contain a necessary element. (0x38a0a1c6)
DPWDS0455E
Token types other than 'kerberos' require that you specify an HTTP header name with the 'header-name' configuration option or an HTTP cookie name with the 'cookie-name' configuration option. (0x38a0a1c7)
DPWDS0456E
Error %08x occurred when retrieving a token for user '%s' to access '%s'. Refer to other log messages for additional detail. (0x38a0a1c8)
DPWDS0600E
An unexpected AXIS exception was caught while processing a client request. Error message %s (0x%x) was returned with the exception. (0x38a0a258)
DPWDS0601E
A failure occurred while processing a received distributed session request. (0x38a0a259)
DPWDS0602E
The server could not bind to the configured address: %s (0x38a0a25a)
DPWDS0604W
The distributed session cache server has started. (0x38a0a25c)
DPWDS0605W
The distributed session cache server has been stopped. (0x38a0a25d)
DPWDS0606E
Could not accept incoming connection on '%s:%d': system error number = %d (0x38a0a25e)
DPWDS0607E
Could not accept incoming connection (0x38a0a25f)
DPWDS0608E
Could not poll for any incoming connections: system error number = %d (0x38a0a260)
DPWDS0609E
Could not poll for incoming connection (0x38a0a261)
DPWDS0610E
Could not determine the local network address of a connection: system error number = %d (0x38a0a262)
DPWDS0611E
Could not determine the local network address of a connection (0x38a0a263)
DPWDS0612E
The %s '%s' is a duplicate or a subset of another configured %s entry. (0x38a0a264)
DPWDS0613E
A configured address is a duplicate or a subset of another. (0x38a0a265)
DPWDS0614E
accept-admin-address values must be a subset of the listen-address addresses. (0x38a0a266)
DPWDS0615E
Could not determine the remote network address of a connection: system error number = %d (0x38a0a267)
DPWDS0616E
Could not determine the remote network address of a connection (0x38a0a268)
DPWDS0619E
A database operation failed on line %d with error %d: '%s'. Native error %d. SQL state: '%s' (0x38a0a26b)
DPWDS0620E
A database operation failed. (0x38a0a26c)
DPWDS0621E
The command 'ADMIN COMMAND 'hsb state' failed with an error %d: '%s'. (0x38a0a26d)
DPWDS0622E
Unable to start the embedded SolidDB server. Error %d. (0x38a0a26e)
DPWDS0623E
Unable to start the embedded SolidDB server. (0x38a0a26f)
DPWDS0624E
Unable to register a shutdown notifier function with the SolidDB server. Error %d. (0x38a0a270)
DPWDS0625E
Unable to register a shutdown notifier function with the embedded SolidDB server. (0x38a0a271)
DPWDS0626E
Unable to load and extract functions from the SolidDB shared library. (0x38a0a272)
DPWDS0627E
The configuration value of %d for number-of-nodes is not valid. It must be 0, 1, 2 or 4. (0x38a0a273)
DPWDS0628E
The configuration value for number-of-nodes is not valid. It must be 0, 1, 2 or 4. (0x38a0a274)
DPWDS0629E
The configuration value of %d for node-number is not valid. It must be a value from 1 to 4. (0x38a0a275)
DPWDS0630E
The configuration value for node-number is not valid. It must be a value from 1 to 4. (0x38a0a276)
DPWDS0631E
The option -n '%s' is not valid or missing. It must be a value from 1 to 4. (0x38a0a277)
DPWDS0632E
The password option -p must be supplied and must not be an empty string. (0x38a0a278)
DPWDS0633E
The option '%s' must be supplied. (0x38a0a279)
DPWDS0634E
The option -N '%s' is not valid. It must be one of 0, 1, 2 or 4. (0x38a0a27a)
DPWDS0636E
Only one of the '-C' or '-U' options must be provided. (0x38a0a27c)
DPWDS0637E
The Distributed Session Cache server is already configured or there is an unexpected problem with the configuration file '%s' (0x38a0a27d)
DPWDS0638E
Unable to contact the remote DSC server at '%s'. (0x38a0a27e)
DPWDS0639E
Unable to open the file '%s' error %d: '%s'. (0x38a0a27f)
DPWDS0640E
Unable to create the file '%s' error %d: '%s'. (0x38a0a280)
DPWDS0641E
Error processing the configuration file '%s' line %d: '%s'. (0x38a0a281)
DPWDS0642E
Unable to remove the file '%s' error %d: '%s'. (0x38a0a282)
DPWDS0643E
Failed to create and initialize the backing database. (0x38a0a283)
DPWDS0644E
Failed to put the backing database into a writable mode. (0x38a0a284)
DPWDS0645E
Failed to cleanly shutdown the backing database. (0x38a0a285)
DPWDS0646E
Failed to copy the data from the primary distributed session cache backing database to the secondary. (0x38a0a286)
DPWDS0647E
Failed to change the ownership of the backing database or configuration files. (0x38a0a287)
DPWDS0648E
Failed to send updates to the master Distributed Session Cache server. State %d with error %d '%s'. Attempting to recover. (0x38a0a288)
DPWDS0651W
The Distribute Session Cache server is waiting for the initial copy of the database to be send to it. (0x38a0a28b)
DPWDS0653W
The Distribute Session Cache server has applied the updated copy of database. (0x38a0a28d)
DPWDS0654E
Failed to unregister this replica from the master database. (0x38a0a28e)
DPWDS0655E
The tool was not able to create the tempory file '%s', error: '%s'. (0x38a0a28f)
DPWDS0656W
Unable to connect to destination %s:%d (0x38a0a290)
DPWDS0657E
Both -K and -F option must be provided. (0x38a0a291)
DPWDS0658E
Both -R and -Q option must be provided. (0x38a0a292)
DPWDS0659E
It is not valid to provide the -b option with -n 1. (0x38a0a293)
DPWDS0660E
You must provide the -b option when the -n option is not 1. (0x38a0a294)
DPWDS0661E
It is not valid to provide the -a option with -n 4. (0x38a0a295)
DPWDS0662E
The '%s' option value of '%s' is not valid. (0x38a0a296)
DPWDS0663W
Waiting for catchup before entering standby mode. (0x38a0a297)
DPWDS0664E
The node-number configuration value of '%d' is not valid. (0x38a0a298)
DPWDS0665E
The node-number configuration value is not valid. (0x38a0a299)
DPWDS0666E
The configuration settings node-before-port can not be set when the value of node-number is 1. (0x38a0a29a)
DPWDS0667E
The configuration settings node-after-port can not be set when the value of node-number is 4. (0x38a0a29b)
DPWDS0668E
Unable to read replicator protocol header from the remote node. (0x38a0a29c)
DPWDS0669E
The replicator protocol header version %d received from the remote node is invalid. (0x38a0a29d)
DPWDS0670E
The replicator protocol header operation %d received from the remote node is invalid. (0x38a0a29e)
DPWDS0671E
The replicator protocol header length %d received from the remote node is out of range. (0x38a0a29f)
DPWDS0672E
Unable to read replicator protocol body (request) from the remote node. (0x38a0a2a0)
DPWDS0673E
Unable to decode the replicator protocol body (request). (0x38a0a2a1)
DPWDS0674E
The replicator protocol request node number %d is not valid. (0x38a0a2a2)
DPWDS0675E
The replicator protocol request timeout value %d is not valid. (0x38a0a2a3)
DPWDS0676E
Unable to write replicator protocol header to the remote node. (0x38a0a2a4)
DPWDS0677E
Unable to write replicator protocol body (request) to the remote node. (0x38a0a2a5)
DPWDS0678E
Unable to encode the replicator protocol body (response). (0x38a0a2a6)
DPWDS0679E
Unable to write replicator protocol body (response) to the remote node. (0x38a0a2a7)
DPWDS0680E
Unable to read replicator protocol body (response) of length %d from the remote node. (0x38a0a2a8)
DPWDS0681E
Unable to decode the replicator protocol body (response). (0x38a0a2a9)
DPWDS0682E
Unable to encode the replicator protocol body (request). (0x38a0a2aa)
DPWDS0683W
This server node %d, has detected node %d has started with time offset %d. (0x38a0a2ab)
DPWDS0684E
The replicator protocol response node number %d is not valid. (0x38a0a2ac)
DPWDS0685E
Expecting to connect to node %d, but reported node is %d. (0x38a0a2ad)
DPWDS0686E
Unable to set the trace level '%s'. Error %d (0x38a0a2ae)
DPWDS0750E
The administration interface of the distributed session cache server did not return all expected data. (0x38a0a2ee)
DPWDS0751E
The administration interface of the distributed session cache server returned some unexpected data. (0x38a0a2ef)
DPWDS0752E
The %s operation of the distributed session cache server administration interface did not return all expected data: %s. (0x38a0a2f0)
DPWDS0753E
The %s operation of the distributed session cache server administration interface returned some data for the %s attribute which was not in the expected format. (0x38a0a2f1)
DPWDS0754E
An error occurred when attempting to communicate with the administration interface of the distributed session cache server using the URL %s: %s (0x%x). (0x38a0a2f2)
DPWDS0755E
The administration interface of the distributed session cache server could not be accessed. (0x38a0a2f3)
DPWDS0762W
No replicas were found for the specified replica set. (0x38a0a2fa)
DPWDS0766W
No sessions were found which match the specified search criteria. (0x38a0a2fe)
DPWDS0767W
The '%s' instance is invalid. (0x38a0a2ff)
DPWDS0768E
The administration operation is not permitted on the interface which was used to contact the distributed session cache server. (0x38a0a300)
DPWDS0769E
The administration operation from '%s' is not permitted on the interface '%s'. (0x38a0a301)
DPWDS0770E
Function call, func, failed error: error codeerror text. (0x38a0a302)
DPWIV0151E
Could not initialize serviceability component (%s, 0x%8.8lx) (0x38ad5097)
DPWIV0152E
Could not register serviceability message table (%s, 0x%8.8lx) (0x38ad5098)
DPWNS1055E
You are already logged in from another client. You can either wait for the other login to end or contact your local support personnel to cancel the existing login. (0x38b9a41f)
DPWNS1056W
You are already logged in from another client. Do you want to terminate your existing login or cancel this new login request? (0x38b9a420)
DPWNS1057E
Unable to intialize the distributed session API (error code 0x%08lx) (0x38b9a421)
DPWNS1058E
Unable to join the replica set '%s' (error code 0x%08lx) (0x38b9a422)
DPWNS1059E
Unable to shut down the distributed session API (error code 0x%08lx) (0x38b9a423)
DPWNS1060E
Unable to leave the replica set '%s' (error code 0x%08lx) (0x38b9a424)
DPWNS1061E
An attempt to create a session failed with error code 0x%08lx. (0x38b9a425)
DPWNS1062E
An attempt to update a session failed with error code 0x%08lx. (0x38b9a426)
DPWNS1063E
An attempt to delete a session failed with error code 0x%08lx. (0x38b9a427)
DPWNS1066E
An error with code 0x%08lx occurred when decoding a session from the SMS. (0x38b9a42a)
DPWNS1067E
An attempt to generate a new external session ID failed with error code 0x%08lx. (0x38b9a42b)
DPWNS1068E
An attempt to register an authentication failure for user '%s' failed with status code 0x%08lx. (0x38b9a42c)
DPWNS1070E
Session version mismatch while deserializing session data. (0x38b9a42e)
DPWNS1071E
The max-concurrent-web-sessions policy value of '%d' is invalid. (0x38b9a42f)
DPWNS1072W
WebSEAL received notification that the distributed session cache for replica-set '%s' was cleared. All local references to sessions are being discarded to synchronize the local session cache with the distributed session cache. (0x38b9a430)
DPWNS1074E
The single sign-off attempt for the user '%s' failed because the single sign-off resource is unavailable. (0x38b9a432)
DPWNS1075E
The single sign-off attempt to %s for user '%s' failed because the configured single sign-off resource is not responding. (0x38b9a433)
DPWNS1076E
The single sign-off attempt to %s for user '%s' failed because the configured single sign-off resource returned a response with the HTTP status code %d. (0x38b9a434)
DPWNS1200W
The application server you are accessing has been taken offline by the system administrator. (0x38b9a4b0)
DPWNS1201E
The server is temporarily unable to service your request. Try again later. (0x38b9a4b1)
DPWNS1202E
An error occurred processing a HTTP transformation. (0x38b9a4b2)
DPWNS1203E
An invalid XML message document was used as part of a HTTP transformation operation. (0x38b9a4b3)
DPWNS1204E
The XML element %s was missing from the document generated by a HTTP transformation operation. (0x38b9a4b4)
DPWNS1205E
The XML attribute %s was missing from the %s element for the document generated by a HTTP transformation operation. (0x38b9a4b5)
DPWNS1206E
The XML element %s was missing from the request change document generated by a HTTP transformation operation. (0x38b9a4b6)
DPWNS1207E
The XML element %s was missing from the response change document generated by a HTTP transformation operation. (0x38b9a4b7)
DPWNS1208E
The action attribute %s is unknown and therefore cannot be used by a HTTP transformation operation. (0x38b9a4b8)
DPWNS1209W
A configuration entry for the resource %s was not defined in the http-transformation stanza of the WebSEAL configuration file and therefore HTTP transformation cannot take place. (0x38b9a4b9)
DPWNS1210E
The cookie attribute %s is unknown and therefore cannot be used by a HTTP transformation operation. (0x38b9a4ba)
DPWNS1211W
The cookie %s already exists in the HTTP message and as such it cannot be added by the transformation rule. (0x38b9a4bb)
DPWNS1212W
The authentication challenge type rules could not be applied because WebSEAL received a request without the User-Agent HTTP header. (0x38b9a4bc)
DPWNS1350W
Failed to load ARM library '%s': error code %d: error message '%s'. ARM support will be disabled. (0x38b9a546)
DPWNS1351W
ARM library is missing function '%s': error code %d: error message '%s'. ARM support will be disabled. (0x38b9a547)
DPWNS1352W
Failed to register the WebSEAL application with ARM: error code %d: error message '%s'. ARM support will be disabled. (0x38b9a548)
DPWNS1353W
Failed to register WebSEAL transaction '%s' with ARM: error code %d: error message '%s'. ARM support will be disabled. (0x38b9a549)
DPWNS1354W
Failed to start WebSEAL as an ARM application: error code %d: error message '%s'. ARM support will be disabled. (0x38b9a54a)
DPWNS1356W
Failed to stop WebSEAL running as an ARM application: error code %d: error message '%s'. (0x38b9a54c)
DPWNS1357W
Failed to unregister the WebSEAL application from ARM: error code %d: error message '%s'. (0x38b9a54d)
DPWNS1358W
Failed to get ARM transaction '%s' arrival time: error code %d: error message '%s'. (0x38b9a54e)
DPWNS1359W
Failed to get the length of an ARM correlator: error code %d: error message '%s'. (0x38b9a54f)
DPWNS1360W
An invalid correlator string was passed to WebSEAL: '%s'. It will not be used for subsequent transactions. (0x38b9a550)
DPWNS1361W
Failed to start ARM transaction '%s': error code %d: error message '%s'. The transaction will not be reported. (0x38b9a551)
DPWNS1362W
Failed to stop ARM transaction '%s': error code %d: error message '%s'. (0x38b9a552)
DPWNS1363W
Unable to start ARM transaction reporting as ARM initialization failed. See log files for more information. (0x38b9a553)
DPWNS1364W
Unable to start ARM transaction reporting as WebSEAL ARM support has been disabled. (0x38b9a554)
DPWNS1365W
ARM transaction reporting is already on. (0x38b9a555)
DPWNS1366W
ARM transaction reporting is already off. (0x38b9a556)
DPWNS1367W
Failed to load ARM library '%s': error code %d: error message '%s'. ARM support will be disabled. (0x38b9a557)
DPWNS1368W
Unable to start ARM transaction reporting as WebSEAL ARM support has been disabled. (0x38b9a558)
DPWNS1500E
The interface '%s', defined in the [%s] stanza, contains an invalid value for '%s'. You must specify either 'http' or 'https'. (0x38b9a5dc)
DPWNS1501E
The option '%s', defined in the [%s] stanza, contains an invalid value. You must specify either 'http' or 'https'. (0x38b9a5dd)
DPWNS1502E
The option '%s' defined in the [%s] stanza contains an invalid port value. (0x38b9a5de)
DPWWA0151E
An insufficient amount of memory was supplied. (0x38cf0097)
DPWWA0305E
The '%s' routine failed for '%s', errno = %ld (0x38cf0131)
DPWWA0306E
Error in configuration file: %s (0x38cf0132)
DPWWA0308W
Function name failed with errno value (0x38cf0134)
DPWWA0309E
Badly formatted config entry for %s cache (0x38cf0135)
DPWWA0310E
Could not open IBM Security Access Manager WebSEAL configuration file (%s) (0x38cf0136)
DPWWA0314E
Initialization of authorization API failed. Major status=0x%x, minor status = 0x%x (0x38cf013a)
DPWWA0315E
Initialization of authentication layer failed: %s (0x38cf013b)
DPWWA0316W
Configuration item value has been assumed for %s (0x38cf013c)
DPWWA0318E
Error in configuration file, invalid accept-client-certs value: %s (0x38cf013e)
DPWWA0319E
Error in configuration file. When accept-client-certs is set to optional or required, you must specify a library with the cert-ssl option, or you must specify an eai-uri option. (0x38cf013f)
DPWWA0320W
Error in configuration. Clients and MPAs cannot use the same session types. (0x38cf0140)
DPWWA0321E
Value for stanza [%s] entry '%s' contains an illegal trailing backslash character. (0x38cf0141)
DPWWA0322E
Value for stanza [%s] entry '%s' contains an unmatched quote. (0x38cf0142)
DPWWA0323E
Value for stanza [%s] entry '%s' contains a 'name = value' with a missing name. (0x38cf0143)
DPWWA0324E
Value for stanza [%s] entry '%s' contains a 'name = value' with a missing = character. (0x38cf0144)
DPWWA0325E
Value for stanza [%s] entry '%s' contains two name value pairs with the same name '%s'. (0x38cf0145)
DPWWA0326E
Stanza [%s] contains an illegal duplicate entry '%s'. (0x38cf0146)
DPWWA0327W
The default WebSEAL TCP and SSL interfaces have both been disabled, which also disables the default WebSEAL worker threads. (0x38cf0147)
DPWWA0328E
The interface '%s' defined in the [%s] stanza contains an illegal empty value for '%s'. (0x38cf0148)
DPWWA0329E
The interface '%s' defined in the [%s] stanza contains an illegal value for '%s'. (0x38cf0149)
DPWWA0330E
The interface '%s' defined in the [%s] stanza contains an invalid value for '%s'. (0x38cf014a)
DPWWA0331E
The interface '%s' defined in the [%s] stanza contains an illegal TCP/IP address value for '%s'. (0x38cf014b)
DPWWA0332E
Invalid certificate authentication configuration for interface '%s' defined in the [%s] stanza. Incompatible combination of accept-client-certs and ssl-id-sessions values. (0x38cf014c)
DPWWA0333E
Invalid certificate cache configuration to support interface '%s' defined in the [%s] stanza. (0x38cf014d)
DPWWA0334E
There is an error in the configuration file. An invalid accept-client-certs value (%s) for the '%s' interface has been defined in the [%s] stanza. (0x38cf014e)
DPWWA0335E
Error in configuration file relating to interface '%s' defined in the [%s] stanza. When accept-client-certs is set to optional, required, or prompt_as_needed, specify a library with the cert-ssl option or the eai-uri option. (0x38cf014f)
DPWWA0336E
The interface '%s' defined in the [%s] stanza must have one of http-port or https-port enabled. (0x38cf0150)
DPWWA0337W
The '%s' routine failed in '%s' for interface %s:%d, errno = %d (0x38cf0151)
DPWWA0338E
Not enough free file descriptors in the process to configure even one of the worker threads wanted by the worker pool named '%s'. (0x38cf0152)
DPWWA0339W
Worker list '%s' has configured %d worker threads which is greater than the system can support. It has automatically been reduced to %d. (0x38cf0153)
DPWWA0340E
Unable to listen on interface %s:%d, errno = %d (0x38cf0154)
DPWWA0341E
Error in configuration file, unknown setting '%s' for interface '%s' defined in the [%s] stanza. (0x38cf0155)
DPWWA0342W
The configuration data for this WebSEAL instance has been logged in '%s' (0x38cf0156)
DPWWA0343E
An error occurred trying to log the WebSEAL configuration data at startup. (0x38cf0157)
DPWWA0345E
The request was too large to store in the session cache. (0x38cf0159)
DPWWA0346E
Invalid certificate data has been supplied. (0x38cf015a)
DPWWA0600E
The requested single sign-on service is not supported by this server (0x38cf0258)
DPWWA0601E
Could not fetch SSO info for user (%s,0x%8lx) (0x38cf0259)
DPWWA0602E
User '%s' does not have any associated SSO info (0x38cf025a)
DPWWA0603E
User '%s' does not have a matching SSO target (0x38cf025b)
DPWWA0605E
Can't perform single sign-on. User '%s' is not logged in (0x38cf025d)
DPWWA0606E
Could not sign user '%s' on due to incorrect target (0x38cf025e)
DPWWA0607E
Received basic authentication challenge for junction where filtering is being applied (0x38cf025f)
DPWWA0608E
Unable to obtain binding to LDAP server (0x38cf0260)
DPWWA0609E
Unable to obtain binding to LDAP-GSO server (0x%8lx) (0x38cf0261)
DPWWA0625E
Either the configuration file is missing or it has errors. (0x38cf0271)
DPWWA0626E
This script can only be used to decode form results. (0x38cf0272)
DPWWA0627E
Could not get the LDAP distinguished name (DN) for the remote user. (0x38cf0273)
DPWWA0628E
The selected resource or resource group does not exist. (0x38cf0274)
DPWWA0629E
Could not bind to the LDAP server. (0x38cf0275)
DPWWA0630E
This script should be referenced with a METHOD of POST. (0x38cf0276)
DPWWA1082E
Invalid HTTP status code present in response. The response could have been sent either by a third-party server or by a local resource, such as a CGI program. (0x38cf043a)
DPWWA1083E
Could not read HTTP status line in response. Possible causes: non-spec HTTP response, connection timeout, no data returned. The response could have been sent either by a third-party server or by a local resource, such as a CGI program. (0x38cf043b)
DPWWA1084E
Could not read HTTP headers in response. Possible causes: non-spec HTTP headers, connection timeout, no data returned. The response could have been sent either by a third-party server or by a local resource, such as a CGI program. (0x38cf043c)
DPWWA1085E
An HTTP message body sent in a response is too short. The response could have been sent either by a third-party server or by a local resource, such as a CGI program. (0x38cf043d)
DPWWA1086E
Could not read request line. Possible causes: non-spec HTTP headers, connection timeout, no data returned (0x38cf043e)
DPWWA1123W
The login data entered could not be mapped to an IBM Security Access Manager user (0x38cf0463)
DPWWA1124W
A client certificate could not be authenticated (0x38cf0464)
DPWWA1125W
The data contained in the HTTP header %s failed authentication (0x38cf0465)
DPWWA1126W
IP address based authentication failed with IP address: %s (0x38cf0466)
DPWWA1128E
The current authentication method does not support reauthentication. Contact the IBM Security Access Manager WebSEAL Administrator. (0x38cf0468)
DPWWA1129E
A reauthentication operation was attempted with an initial authentication method for which reauthentication is not supported. (0x38cf0469)
DPWWA1130E
Authentication level mismatch when performing reauthentication (0x38cf046a)
DPWWA1131W
An entry in the [portal-map] stanza is invalid. (0x38cf046b)
DPWWA1132W
Entry '%s = %s' in the [portal-map] stanza is invalid. (0x38cf046c)
DPWWA1133E
The 'host' header presented in the client request does not conform to HTTP specifications. (0x38cf046d)
DPWWA1200E
The requested junction type is not supported by this server (0x38cf04b0)
DPWWA1204E
Requested object is not a directory (0x38cf04b4)
DPWWA1205E
No query-contents on this server (0x38cf04b5)
DPWWA1206E
Illegal name for a junction point (0x38cf04b6)
DPWWA1207E
Trying to add wrong type of server at this junction point (0x38cf04b7)
DPWWA1208E
Trying to add two servers with the same UUID at a junction point (0x38cf04b8)
DPWWA1209E
Trying to add the same server twice at the same junction point (0x38cf04b9)
DPWWA1210E
Could not open junction database (%s,0x%8x) (0x38cf04ba)
DPWWA1211E
Could not load junction database (%s,0x%8lx) (0x38cf04bb)
DPWWA1212E
Could not delete entry from junction database (%s,0x%8lx) (0x38cf04bc)
DPWWA1213E
Could not write entry to junction database (%s,0x%8lx) (0x38cf04bd)
DPWWA1214W
Could not fetch entry from junction database (%s,0x%8lx) (0x38cf04be)
DPWWA1215E
Invalid junction flags for this junction type (0x38cf04bf)
DPWWA1216E
Invalid parameters for junction (0x38cf04c0)
DPWWA1217E
An error occurred when writing a request to a junction. WebSEAL was unable to dispatch the request to another junction server. (0x38cf04c1)
DPWWA1218E
Unknown junction server host (0x38cf04c2)
DPWWA1219E
Could not build junction server URL mappings (0x%8lx) (0x38cf04c3)
DPWWA1220E
Cannot delete the junction at the root of the Web space. Try replacing it instead (0x38cf04c4)
DPWWA1221E
Cannot add two servers with different options (case-sensitive, etc) at the same junction (0x38cf04c5)
DPWWA1222E
A third-party server is not responding. Possible causes: the server is down, there is a hung application on the server, or network problems. This is not a problem with the WebSEAL server. (0x38cf04c6)
DPWWA1224E
Could not load junction database (0x38cf04c8)
DPWWA1225E
Could not delete entry from junction database (0x38cf04c9)
DPWWA1226E
Could not write entry to junction database (0x38cf04ca)
DPWWA1227W
Could not fetch entry from junction database (0x38cf04cb)
DPWWA1228E
Unable to contact junction server host at mount point: %s (0x38cf04cc)
DPWWA1229E
Unable to load junction file %s: %s (0x38cf04cd)
DPWWA1230E
Error building junction %s from file %s: %s (0x38cf04ce)
DPWWA1234E
An invalid status code was received in a response sent by a third-party server. This is not a problem with the WebSEAL system. (0x38cf04d2)
DPWWA1235E
Could not read the response status line sent by a third-party server. Possible causes: non-spec HTTP headers, connection timeout, no data returned. This is not a problem with the WebSEAL server. (0x38cf04d3)
DPWWA1236E
Could not read the response headers sent by a third-party server. Possible causes: non-spec HTTP headers, connection timeout, no data returned. This is not a problem with the WebSEAL server. (0x38cf04d4)
DPWWA1237E
An invalid HTTP header was sent by a third-party server. This is not a problem with the WebSEAL server. (0x38cf04d5)
DPWWA1238E
An HTTP message body sent in a response by a third-party server is too short. This is not a problem with the WebSEAL server. (0x38cf04d6)
DPWWA1239E
A third-party server is not responding. Possible causes: the server is down, there is a hung application on the server, or network problems. This is not a problem with the WebSEAL server. (0x38cf04d7)
DPWWA1240E
Could not build Virtual Host Junction host mappings (0x%8lx) (0x38cf04d8)
DPWWA1507E
No password supplied in HTTP authentication header (0x38cf05e3)
DPWWA1518W
The specified certificate key label %s is incorrect. The default one will be used instead. (0x38cf05ee)
DPWWA1950E
Stanza '%s' is missing from configuration file (0x38cf079e)
DPWWA1951E
Configuration item '[%s]%s' is missing from configuration file (0x38cf079f)
DPWWA1952E
Received invalid HTTP header in response. The response could have been sent either by a third-party server or by a local resource, such as a CGI program. (0x38cf07a0)
DPWWA1953E
HTTP document fetch failed with status %d (0x38cf07a1)
DPWWA2009E
The forms single-sign-on argument '%s' needs a colon. (0x38cf07d9)
DPWWA2010E
Forms single-sign-on GSO argument '%s' is not valid. GSO arguments must be either 'gso:username' or 'gso:password.' (0x38cf07da)
DPWWA2011E
The forms single-sign-on argument '%s' is not valid. (0x38cf07db)
DPWWA2012E
Forms single-sign-on configuration error. (0x38cf07dc)
DPWWA2013E
Forms single-sign-on URLs must be relative to the junction point. (0x38cf07dd)
DPWWA2014E
An internal error in the forms single-sign-on module occurred. (0x38cf07de)
DPWWA2015E
A forms SSO authentication request would have been dispatched to a different junction than the login request. The request has been aborted. (0x38cf07df)
DPWWA2016E
No HTML form for single-sign-on was found. (0x38cf07e0)
DPWWA2017E
The login form returned by the junction did not contain all required form attributes. (0x38cf07e1)
DPWWA2018E
The action URI in the login form returned by the junction did not match any WebSEAL junction. (0x38cf07e2)
DPWWA2019E
The action URI in the login form returned by the junction was invalid. (0x38cf07e3)
DPWWA2020E
One or more of the arguments passed to the SU authentication module were invalid. (0x38cf07e4)
DPWWA2021E
The SU authentication method specified is not enabled. (0x38cf07e5)
DPWWA2023E
Configuration item '[%s]%s' has an invalid value '%s' (0x38cf07e7)
DPWWA2024E %s [%s] %s: Value is out of range. It must be value from 0 to 100. (0x38cf07e8)
DPWWA2025W
IBM Security Access Manager WebSEAL has lost contact with junction server: %s (0x38cf07e9)
DPWWA2026W
IBM Security Access Manager WebSEAL has regained contact with junction server: %s (0x38cf07ea)
DPWWA2027E
One or more of the form arguments is either missing or invalid. (0x38cf07eb)
DPWWA2028E
New password verification failed. Make sure both new password fields contain the same data. (0x38cf07ec)
DPWWA2034E
Some PKCS#11 options are missing. You must specify either all or none of the the options: pkcs11-driver-path, pkcs11-token-label, pkcs11-token-pwd (0x38cf07f2)
DPWWA2035E
Credential generation failed during the credential refresh operation. Error code 0x%lx (0x38cf07f3)
DPWWA2036E
Credential generation failed during the credential refresh operation. (0x38cf07f4)
DPWWA2037E
An invalid result for a credential refresh rule was specified. (0x38cf07f5)
DPWWA2038E
An internal error occurred during the credential refresh operation. (0x38cf07f6)
DPWWA2039W
A credential attribute value of type %lu not supported by credential refresh was found. The value was removed from the new credential. (0x38cf07f7)
DPWWA2040E
User session IDs must be enabled in order to use the credential refresh feature. (0x38cf07f8)
DPWWA2041E
An invalid session cache entry was found while refreshing a user's credential. (0x38cf07f9)
DPWWA2042W
The user is not logged in to the web server. (0x38cf07fa)
DPWWA2044E
Invalid certificate authentication configuration. Incompatible combination of accept-client-certs and ssl-id-sessions values. (0x38cf07fc)
DPWWA2045W
A client attempted to Step-up to certificates, but the server is not configured for Step-up to certificates. (0x38cf07fd)
DPWWA2047E
The activity timestamp is missing from the failover cookie. (0x38cf07ff)
DPWWA2048E
The original authentication method in the failover cookie is not recognized for failover authentication on this server. The value %s is invalid. (0x38cf0800)
DPWWA2049E
The original authentication method in the failover cookie is not recognized for failover authentication on this server. (0x38cf0801)
DPWWA2050E
An authentication system failure has occurred. (0x38cf0802)
DPWWA2051E
An authentication system failure has occurred: error: %s (error code: %#lx). (0x38cf0803)
DPWWA2052E
The cross domain single sign-on operation failed. (0x38cf0804)
DPWWA2053E
The cross domain single sign-on system failed with an unexpected error: %#x (0x38cf0805)
DPWWA2054E
No default HTTP method permission map has been specified. (0x38cf0806)
DPWWA2055E
The HTTP method permission map configuration information could not be found in the configuration file. (0x38cf0807)
DPWWA2057E
The SSO token module configuration data was missing or invalid. (0x38cf0809)
DPWWA2058E
The integer value '%s' for the '%s' entry in the '%s stanza is not valid. (0x38cf080a)
DPWWA2059W
The %s attribute could not be extracted from a credential: API error: %s (API error code [%x:%x]). (0x38cf080b)
DPWWA2060W
The %s attribute could not be extracted from a credential: API error code [%x:%x]. (0x38cf080c)
DPWWA2061W
The number of values for the %s attribute could not be retrieved from an attribute list: API error: %s (API error code [%x:%x]). (0x38cf080d)
DPWWA2062W
The number of values for the %s attribute could not be retrieved from an attribute list: API error code [%x:%x]. (0x38cf080e)
DPWWA2063W
The type of value %d for the %s attribute from an attribute list could not be determined: API error: %s (API error code [%x:%x]). (0x38cf080f)
DPWWA2064W
The type of value %d for the %s attribute from an attribute list could not be determined: API error code [%x:%x]. (0x38cf0810)
DPWWA2065W
Value %d of the %s attribute cannot be included in an SSO token, as it is of type %s. (0x38cf0811)
DPWWA2066W
The %s attribute could not be extracted from an attribute list: API error: %s (API error code [%x:%x]). (0x38cf0812)
DPWWA2067W
The %s attribute could not be extracted from an attribute list: API error code [%x:%x]. (0x38cf0813)
DPWWA2068W
The attribute list could not be retrieved from a credential: API error: %s (API error code [%x:%x]). (0x38cf0814)
DPWWA2069W
The attribute list could not be retrieved from a credential: API error code [%x:%x]. (0x38cf0815)
DPWWA2070W
The list of entry names could not be retrieved from an attribute list: API error: %s (API error code: [%x:%x]). (0x38cf0816)
DPWWA2071W
The list of entry names could not be retrieved from an attribute list: API error code [%x:%x]. (0x38cf0817)
DPWWA2072E
No cryptographic keys are configured for cross domain single sign-on in the stanza '%s'. (0x38cf0818)
DPWWA2073E
No cryptographic keys are configured for e-community single sign-on in the stanza '%s'. (0x38cf0819)
DPWWA2074W
The machine '%s' could not vouch for the user's identity: error: %s (error code: %#lx) (0x38cf081a)
DPWWA2075E
The stanza '%s' contains an invalid SSO token incoming attribute configuration item: '%s = %s'. (0x38cf081b)
DPWWA2076E
Failed to construct a credential from a PAC supplied by an EAI server. Major status = 0x%x, minor status = 0x%x. (0x38cf081c)
DPWWA2077E
Could not authenticate user. An EAI server returned invalid authentication data. (0x38cf081d)
DPWWA2078E
Could not authenticate user. An external authentication service did not return required authentication data. (0x38cf081e)
DPWWA2079E
Configuration of the SSO create and/or consume authentication module(s) failed: %s'. (0x38cf081f)
DPWWA2080E
The session inactivity timestamp is missing from the failover cookie. (0x38cf0820)
DPWWA2081E
The session lifetime timestamp is missing from the failover cookie. (0x38cf0821)
DPWWA2082E
This system error code could not be converted to an error string. (0x38cf0822)
DPWWA2083E
The shared library could not be opened. (0x38cf0823)
DPWWA2084E
Could not find the requested symbol. (0x38cf0824)
DPWWA2085E
The shared library file '%s' could not be opened: %s (0x38cf0825)
DPWWA2086E
The symbol '%s' could not be resolved in the shared library '%s': %s (0x38cf0826)
DPWWA2087E
The '%s' flag to the authentication module requires an argument. (0x38cf0827)
DPWWA2088E
Unknown authentication module flag '%s'. (0x38cf0828)
DPWWA2089E
The authentication module flag '%s' requires an integer argument. (0x38cf0829)
DPWWA2090E
The session activity timestamp is missing from the failover cookie. (0x38cf082a)
DPWWA2091E
Bad EAI trigger URL pattern '%s' in configuration file. (0x38cf082b)
DPWWA2092E
Could not reset the cache session lifetime because the EAI server provided a bad value ('%s') in the 'am_eai_xattr_session_lifetime' header. (0x38cf082c)
DPWWA2093E
Configuration item '[%s]%s' has an invalid value '%s' (0x38cf082d)
DPWWA2100E
The new user ID does not match the user ID previously presented to authenticate. (0x38cf0834)
DPWWA2101E
The new user ID (%s) does not match the user ID (%s)previously presented to authenticate. (0x38cf0835)
DPWWA2250E
The ACL attached to the requested resource does not permit the Traverse operation. (0x38cf08ca)
DPWWA2251E
The ACL attached to the requested resource does not allow access by this user. (0x38cf08cb)
DPWWA2252E
The requested resource is protected by a policy that restricts access to specific time periods. This request is prohibited at this time. (0x38cf08cc)
DPWWA2253E
An External Authorization Server has denied access to the requested resource. (0x38cf08cd)
DPWWA2254E
The requested resource is protected by a policy that restricts access to specific clients. This request is prohibited for this client. (0x38cf08ce)
DPWWA2255E
This user does not have permissions to perform a delegated operation. (0x38cf08cf)
DPWWA2401E
An internal error occurred during SPNEGO processing. (0x38cf0961)
DPWWA2402E
Initialization of Kerberos authentication failed. (0x38cf0962)
DPWWA2403E
Your browser supplied NTLM authentication data. NTLM is not supported by WebSEAL. Make sure your browser is configured to use Integrated Windows Authentication. (0x38cf0963)
DPWWA2404E
An error occurred when creating the SPNEGO token. (0x38cf0964)
DPWWA2405W
Cannot update failover cookie for switch-user admins (0x38cf0965)
DPWWA2406W
Could not find the failover session ID in the user's failover token (0x38cf0966)
DPWWA2407W
The failover session ID in the user's failover token does not match the session ID in the user's session cookie. (0x38cf0967)
DPWWA2408W
Cannot find the session cookie in the user's request for use in comparing with the failover cookie. (0x38cf0968)
DPWWA2409W
Reverse lookup for host '%s' returned an alternate host name '%s'. This might prevent SPNEGO authentication from functioning properly. (0x38cf0969)
DPWWA2410E
Initialization of Kerberos authentication for server principal '%s' failed. (0x38cf096a)
DPWWA2411E
No SPNEGO service principal credential found for Virtual Host Junction '%s'. (0x38cf096b)
DPWWA2550E
Error initializing the credential policy entitlements service (0x38cf09f6)
DPWWA2551E
Policy retrieval for user %s failed: %s (error code: 0x%lx) (0x38cf09f7)
DPWWA2734W
The authentication type is unknown. The audit event will not be recorded. (0x38cf0aae)
DPWWA2735W
The reason for the session termination is unknown. The audit event will not be recorded. (0x38cf0aaf)
DPWWA2850E
A general failure has occured within the SOAP client. (0x38cf0b22)
DPWWA2851E
An error was returned from the SOAP server in cluster %s when calling the %s interface: %s (code: 0x%x). (0x38cf0b23)
DPWWA2852E
An error occurred when attempting to communicate with the SOAP server URL %s: %s (error code: %d/0x%x). (0x38cf0b24)
DPWWA2853E
The SOAP client failed to initialized. (0x38cf0b25)
DPWWM1392E
Bad value for path attribute. (0x38cfc570)
DPWWM1416E
Error: No filename specified in request. (0x38cfc588)
DPWWM1417E
Error: Could not retrieve file data. (0x38cfc589)
DPWWM1419E
You can only use the -u flag with a stateful junction. (0x38cfc58b)
DPWWM1420E
The UUID specified with the -u flag is in an invalid format. (0x38cfc58c)
DPWWM1427E
-D flag only supported with ssl, sslproxy or mutual junctions. (0x38cfc593)
DPWWM1432W
NOTE: Ensure the CA root certificate used to sign the junctioned server certificate is installed in the WebSEAL certificate key database. (0x38cfc598)
DPWWM1435E
-C flag only supported with ssl or sslproxy junctions. (0x38cfc59b)
DPWWM1436E
Either -K or -B can be defined for a junction. (0x38cfc59c)
DPWWM1437E
Both -K and -B flag only supported with ssl, sslproxy or mutual junctions. (0x38cfc59d)
DPWWM1438E
The -b option cannot be specified with the -B option. (0x38cfc59e)
DPWWM1439E
-U <username> and -W <password> must be supplied with the -B option. (0x38cfc59f)
DPWWM1451W
Too few authentication methods configured. (0x38cfc5ab)
DPWWM1452W
No unauthenticated method configured. (0x38cfc5ac)
DPWWM2045E
Can't add servers to this type of Virtual Host Junction (0x38cfc7fd)
DPWWM2047E
Must specify the Virtual Host Junction type using the '-t' flag (0x38cfc7ff)
DPWWM2050W
WARNING: A Virtual Host Junction already exists using label %s (0x38cfc802)
DPWWM2051E
-C flag only supported with ssl or sslproxy Virtual Host Junctions. (0x38cfc803)
DPWWM2052E
Can only use -T flag when using '-b gso' (0x38cfc804)
DPWWM2053E
Must also use -T flag when using '-b gso' (0x38cfc805)
DPWWM2054E
Either -K or -B can be defined for a Virtual Host Junction. (0x38cfc806)
DPWWM2055E
Both -K and -B flag only supported with ssl or sslproxy Virtual Host Junctions. (0x38cfc807)
DPWWM2056E
-U <username> and -W <password> must be supplied with the -B option. (0x38cfc808)
DPWWM2057E
The -b option cannot be specified with the -B option. (0x38cfc809)
DPWWM2058E
Must specify the Virtual Host Junction server hostname using the '-h' flag (0x38cfc80a)
DPWWM2059E
The -H and -P flags are valid only for tcpproxy and sslproxy type Virtual Host Junctions. (0x38cfc80b)
DPWWM2060E
A proxy hostname must be supplied with the -H option (0x38cfc80c)
DPWWM2062E
You can only use the -u flag with a stateful Virtual Host Junction. (0x38cfc80e)
DPWWM2063E
-D flag only supported with ssl or sslproxy Virtual Host Junctions. (0x38cfc80f)
DPWWM2064E
The UUID specified with the -u flag is in an invalid format. (0x38cfc810)
DPWWM2065W
NOTE: Ensure the CA root certificate used to sign the Virtual Host Junctioned server certificate is installed in the WebSEAL certificate key database. (0x38cfc811)
DPWWM2067E
Must specify a virtual hostname using the '-v' flag (0x38cfc813)
DPWWM2068E
Must specify a file system directory using the '-d' flag (0x38cfc814)
DPWWM2069E
Must specify a server to remove using the '-i' flag (0x38cfc815)
DPWWM2071E
Could not delete Virtual Host Junction (0x38cfc817)
HPDAC0752E
The requested object was not found. (0x1005b2f0)
HPDAC0753E
The ACL action specified could not be mapped. (0x1005b2f1)
HPDAC0754E
Privacy or data integrity quality of protection cannot be specified in the unauthenticated entry. (0x1005b2f2)
HPDAC0755E
The ACL has an unauthenticated entry but there is no any-other entry. The any-other entry must be at least as permissive as unauthenticated. (0x1005b2f3)
HPDAC0756E
The any-other entry is missing actions from the unauthenticated entry. The any-other entry must be at least as permissive as unauthenticated. (0x1005b2f4)
HPDAC0757E
An entry in the ACL is missing some actions granted by the unauthenticated entry. Users can bypass an explicit action revocation if allowed by the unauthenticated entry. (0x1005b2f5)
HPDAC0758E
An entry in the ACL that grants control does not also grant traverse. (0x1005b2f6)
HPDAC0759E
No entry in the ACL grants control permission. (0x1005b2f7)
HPDAC0760E
The user is revoking the control permission for itself on this ACL. (0x1005b2f8)
HPDAC0766E
The ACL cannot be detached from the root protected object. Try replacing the attached ACL instead. (0x1005b2fe)
HPDAC0767E
Core ACL actions cannot be deleted. (0x1005b2ff)
HPDAC0768E
The ACL action name already exists. (0x1005b300)
HPDAC0769E
Too many ACL actions are already defined. (0x1005b301)
HPDAC0771E
The user registry client is unavailable. (0x1005b303)
HPDAC0772E
The LDAP user registry client returned an error status for the specified DN. (0x1005b304)
HPDAC0773E
The LDAP user registry client returned an unexpected failure status. (0x1005b305)
HPDAC0776E
The DN specified was not found in the registry. (0x1005b308)
HPDAC0777E
LDAP Registry client returned a memory error. (0x1005b309)
HPDAC0778E
The specified user's account is set to invalid. (0x1005b30a)
HPDAC0779E
The LDAP registry server is down. (0x1005b30b)
HPDAC0780E
A valid action group is specified, but no action is specified. (0x1005b30c)
HPDAC0901E
The Authorization service is already initialized. (0x1005b385)
HPDAC0902E
There was no authorization client listener port specified. (0x1005b386)
HPDAC0906E
An invalid parameter was supplied to the API function. (0x1005b38a)
HPDAC0909E
An unspecified implementation dependent error has occurred. (0x1005b38d)
HPDAC0910E
An invalid policy cache mode value was specified. (0x1005b38e)
HPDAC0912E
An invalid database file path value was specified. (0x1005b390)
HPDAC0914E
An invalid policy cache refresh interval value was specified. (0x1005b392)
HPDAC0915E
An invalid listen flags value was specified. (0x1005b393)
HPDAC0919E
An invalid LDAP host name was specified. (0x1005b397)
HPDAC0920E
An invalid LDAP host port was specified. (0x1005b398)
HPDAC0923E
An invalid LDAP server SSL keyfile was specified. (0x1005b39b)
HPDAC0924E
An invalid LDAP server SSL keyfile DN was specified. (0x1005b39c)
HPDAC0925E
An invalid LDAP server SSL keyfile password was specified. (0x1005b39d)
HPDAC0926E
One or more of the LDAP server values was not specified. (0x1005b39e)
HPDAC0928E
The attempt to initialize the LDAP registry failed. (0x1005b3a0)
HPDAC0930E
A memory allocation call failed. (0x1005b3a2)
HPDAC0931E
Unable to configure LDAP replica server. (0x1005b3a3)
HPDAC0932E
An invalid LDAP bind user DN was specified. (0x1005b3a4)
HPDAC0933E
The password for the LDAP bind user was invalid. (0x1005b3a5)
HPDAC0934E
An invalid configuration file path was specified. (0x1005b3a6)
HPDAC0935E
An error occurred loading the aznAPI configuration file. (0x1005b3a7)
HPDAC0936E
An error occurred loading the configuration file specified as the parameter to 'ldap-server-config' in the aznAPI config file. (0x1005b3a8)
HPDAC0937E
An invalid maximum search size was specified. (0x1005b3a9)
HPDAC0940E
An invalid attribute value was specified for the azn_init_set_perminfo_attrs attribute. (0x1005b3ac)
HPDAC0941E
Too many permission information attributes were specified with the azn_init_set_perminfo_attrs attribute. (0x1005b3ad)
HPDAC0943E
An invalid trace configuration parameter was specified: %s. (0x1005b3af)
HPDAC0944E
An invalid statistics configuration parameter was specified: %s. (0x1005b3b0)
HPDAC0945E
The value specified for the 'timeout' parameter in the [ldap] stanza is invalid: %s. (0x1005b3b1)
HPDAC0946E
The value specified for the 'authn-timeout' parameter in the [ldap] stanza is invalid: %s. (0x1005b3b2)
HPDAC0947E
The value specified for the 'search-timeout' parameter in the [ldap] stanza is invalid: %s. (0x1005b3b3)
HPDAC0948E
Validation of the rule text for the rule object failed. Refer to the error log for more information about the failure. (0x1005b3b4)
HPDAC0949E
Validation of the rule text for rule object %s failed. Error code 0x%x was returned along with error message %s. (0x1005b3b5)
HPDAC0950E
An ADI container name was found in multiple places in the input from the application. Refer to the error log for more information about the failure. (0x1005b3b6)
HPDAC0951E
The ADI container name %s was found in multiple places in the input from the application. (0x1005b3b7)
HPDAC0952E
The XSL processor failed to evaluate the rule object. Refer to the error log for more information about the failure. (0x1005b3b8)
HPDAC0953E
The XSL processor failed to evaluate the rule object %s. Error code 0x%x was returned along with error message %s. (0x1005b3b9)
HPDAC0954E
The rule object was not evaluated because there was insufficient access decision information provided in the application context and credential attributes. (0x1005b3ba)
HPDAC0955E
Rule object %s was not evaluated because there was insufficient access decision information provided to the access decision call. Missing ADI items include: %s. (0x1005b3bb)
HPDAC0956E
The rule text is invalid because the template match statement does not match one of the minimum required paths of /XMLADI or XMLADI. (0x1005b3bc)
HPDAC0957E
The rule %s is invalid because the template match statement does not match one of the minimum required paths of /XMLADI or XMLADI. (0x1005b3bd)
HPDAC0958E
The rule was found to have no identifiable ADI to use when evaluating the rule. (0x1005b3be)
HPDAC0959E
Rule %s was found to have no identifiable ADI to use when evaluating the rule. (0x1005b3bf)
HPDAC0960E
The rule has a null entry in the compiled rules cache. (0x1005b3c0)
HPDAC0961E
Rule %s has a null entry in the compiled rules cache. (0x1005b3c1)
HPDAC0962E
The XSL prolog entry specifies an XSL output method other than 'text', which is an invalid processor setting for rules evaluation. (0x1005b3c2)
HPDAC0963E
The XSL prolog asks the XSL processor to generate an XML declaration in the output from a rule evaluation. This setting is invalid. (0x1005b3c3)
HPDAC0964E
The method of output encoding specified for the XSL processor is invalid for the purposes of rule evaluation. (0x1005b3c4)
HPDAC0965E
The parsing of the compiled XSL rule returned an invalid element pointer. (0x1005b3c5)
HPDAC0966E
The parsing of the compiled XSL rule returned an invalid template match string pointer. (0x1005b3c6)
HPDAC0967E
An invalid XSL operation was encountered while parsing the compiled XSL rule. (0x1005b3c7)
HPDAC0968E
The rule does not return a valid result tag to the authorization engine. (0x1005b3c8)
HPDAC0969E
Rule %s does not return a valid result tag to the authorization engine. (0x1005b3c9)
HPDAC0970E
The rule contains an absolute XPath that doesn't include the top-level document element /XMLADI. (0x1005b3ca)
HPDAC0971E
The XSL prolog contains an XML namespace declaration for the default namespace. The default namespace is reserved for use by Security Access Manager. (0x1005b3cb)
HPDAC0972E
The XSL prolog contains a namespace declaration that has an invalid URI. (0x1005b3cc)
HPDAC0973E
The XSL prolog contains a namespace declaration that has no prefix to URI assignment. (0x1005b3cd)
HPDAC0974E
The XSL prolog contains a duplicate namespace prefix or URI declaration. (0x1005b3ce)
HPDAC0975E
The XSL prolog contains a namespace declaration for the prefix 'xsl'. This prefix is reserved for the XSLT language namespace. (0x1005b3cf)
HPDAC0976E
An unexpected Xalan processor exception was caught during rule processing. Refer to the error log for more information about the exception. (0x1005b3d0)
HPDAC0977E
An unexpected Xalan processor exception was caught during rule processing. Error message %s was returned with the exception. (0x1005b3d1)
HPDAC0978E
A predicate expression using the /XMLADI top-level document element cannot be used in an authorization rule. (0x1005b3d2)
HPDAC0979E
The result string returned from the rule evaluation is greater than the maximum result buffer size of 1023 bytes. (0x1005b3d3)
HPDAC0980E
A value added to the azn_cred_groups attribute is not a string value. (0x1005b3d4)
HPDAC0981E
The request to add group memberships to the user credential from an entitlement service was denied. (0x1005b3d5)
HPDAC0982E
The code set parameter specified is not one of the valid code set name constants expected by the aznAPI runtime. (0x1005b3d6)
HPDAC1050E
Operation is not authorized. (0x1005b41a)
HPDAC1051E
Operation is not authorized. Request permitted by Warning Mode. (0x1005b41b)
HPDAC1559E
aznAPI -- Invalid Protected Object Reference. (0x1005b617)
HPDAC1560E
aznAPI -- Attribute Value is not of type pobj. (0x1005b618)
HPDAC1561E
aznAPI -- Unknown parameter specified in Administration service plugin's definition. (0x1005b619)
HPDAC1562E
aznAPI -- Protected Object path is not specified in Administration service plugin's definition. (0x1005b61a)
HPDAC1563E
aznAPI -- One of the task functions is not found in the Administration service plugin's shared library. (0x1005b61b)
HPDAC1564E
aznAPI -- Protected Object hierarchy name has already been registered by another Administration service definition. (0x1005b61c)
HPDAC1565E
aznAPI -- Invalid Message ID Reference. (0x1005b61d)
HPDAC1566E
aznAPI -- Message for the major code is not found. (0x1005b61e)
HPDAC1567E
aznAPI -- Attribute Value is not of type unsigned long. (0x1005b61f)
HPDAC1568E
aznAPI -- Administration Service -- Invalid Service Info Handle passed to plugin's shared library. (0x1005b620)
HPDAC1569E
aznAPI -- Administration Service -- Invalid Argument Count passed to plugin's shared library. (0x1005b621)
HPDAC1570E
aznAPI -- Administration Service -- Invalid Argument Array passed to plugin's shared library. (0x1005b622)
HPDAC1571E
aznAPI -- Administration Service -- Plugin's shared library received an out-of-memory error. (0x1005b623)
HPDAC1574E
aznAPI -- Entitlements Service -- Invalid Service Info Handle passed to plugin's shared library. (0x1005b626)
HPDAC1575E
aznAPI -- Entitlements Service -- Invalid Argument Count passed to plugin's shared library. (0x1005b627)
HPDAC1576E
aznAPI -- Entitlements Service -- Invalid Argument Array passed to plugin's shared library. (0x1005b628)
HPDAC1577E
aznAPI -- Entitlements Service -- Plugin's shared library received an out-of-memory error. (0x1005b629)
HPDAC1579E
aznAPI -- EAS -- Invalid Service Info Handle passed to plugin's shared library. (0x1005b62b)
HPDAC1580E
aznAPI -- EAS -- Invalid Argument Count passed to plugin's shared library. (0x1005b62c)
HPDAC1581E
aznAPI -- EAS -- Invalid Argument Array passed to plugin's shared library. (0x1005b62d)
HPDAC1582E
aznAPI -- EAS -- Plugin's shared library received an out-of-memory error. (0x1005b62e)
HPDAC1584E
aznAPI -- Credential Modification Service -- Invalid Service Info Handle passed to plugin's shared library. (0x1005b630)
HPDAC1585E
aznAPI -- Credential Modification Service -- Invalid Argument Count passed to plugin's shared library. (0x1005b631)
HPDAC1586E
aznAPI -- Credential Modification Service -- Invalid Argument Array passed to plugin's shared library. (0x1005b632)
HPDAC1587E
aznAPI -- Credential Modification Service -- Plugin's shared library received an out-of-memory error. (0x1005b633)
HPDAC1589E
aznAPI -- PAC Service -- Invalid Service Info Handle passed to plugin's shared library. (0x1005b635)
HPDAC1590E
aznAPI -- PAC Service -- Invalid Argument Count passed to plugin's shared library. (0x1005b636)
HPDAC1591E
aznAPI -- PAC Service -- Invalid Argument Array passed to plugin's shared library. (0x1005b637)
HPDAC1592E
aznAPI -- PAC Service -- Plugin's shared library received an out-of-memory error. (0x1005b638)
HPDAC1594E
aznAPI -- Initialization failed because a non-zero SSL-listening port is not specified. (0x1005b63a)
HPDAC1595E
aznAPI -- Major code is invalid. (0x1005b63b)
HPDAC1596E
aznAPI -- Modification of the attribute is prohibited. (0x1005b63c)
HPDAC1597E
aznAPI -- azn_init_ssl_local_domain cannot override the SSL-local-domain entry in the aznAPI client configuration file. (0x1005b63d)
HPDAC1598E
aznAPI -- Uninitialized Mechanism Info structure. (0x1005b63e)
HPDAC1599E
The account associated with the DN of the certificate presented to the Policy server does not match the server account owning the values being updated. The Policy server log contains the account names. (0x1005b63f)
HPDAC1600E
The account '%s' associated with the DN of the certificate presented to the Policy server does not match the server account '%s' owning the values being updated. (0x1005b640)
HPDAC1650E
AZN Entitlements Extended Attributes Service - app_context does not contain any attribute names. (0x1005b672)
HPDAC1651E
AZN Entitlements Extended Attributes Service - app_context contains more than one attribute name. (0x1005b673)
HPDAC1652E
AZN Entitlements Extended Attributes Service - app_context contains an invalid attribute name. (0x1005b674)
HPDAC1653E
AZN service plug-in %s failed to shutdown (0x%x/0x%x). (0x1005b675)
HPDAC1654E
The SOAP client of the AMWebARS entitlement service returned an error. (0x1005b676)
HPDAC1655E
The SOAP client of the AMWebARS entitlement service returned the error code: %d. (0x1005b677)
HPDAC1656E
The AMWebARS entitlement service returned the internal error: %s. (0x1005b678)
HPDAC1657E
The AMWebARS entitlement service URL is NULL. (0x1005b679)
HPDAC1658E
An error occurred loading the aznAPI configuration file. (0x1005b67a)
HPDAC1659W
No configuration file specified for the credential attributes entitlement service %s. (0x1005b67b)
HPDAC1660W
No service configuration information was found in the specified file %s. (0x1005b67c)
HPDAC1661W
The registry operations for source %s failed. (0x1005b67d)
HPDAC1667E
The AXIS client of the AMWebARS entitlement service returned the error
: %s. (0x1005b683)
HPDAC1668E
The AXIS client of the AMWebARS entitlement service returned the unkno
wn error. (0x1005b684)
HPDAC1669E
An unexpected AXIS exception was caught during the call to AMWebArs we
b service. Refer to the error log for more information about the exception. (0x1005b685)
HPDAC1670E
An unexpected AXIS exception was caught during the call to AMWebArs we
b service. Error message %s was returned with the exception. (0x1005b686)
HPDAZ0256E
Zero or more than one base entry is configured for the custom repository [ %s ]. Only one base entry is allowed. (0x38638100)
HPDAZ0257E
The custom configuration property [ %s ] and its value [ %s ] is either invalid or incorrect. (0x38638101)
HPDAZ0258E
Cannot modify the entity property [ %s ]. The Security Access Manager custom registry
adapter for WebSphere Virtual member manager does not support renaming an entity. (0x38638102)
HPDAZ0259E
The specified JRE (%s) does not exist. (0x33841103)
HPDAZ0260E
The \'full\' or \'standalone\' are the only options for configuration type. (0x33841104)
HPDAZ0261E
'yes' or 'no' are the only acceptable values. (0x33841105)
HPDAZ0262E
Unable to query information from pd.conf file. (0x33841106)
HPDAZ0263E
Unable to query local host name. (0x33841107)
HPDAZ0264E
The %s entry for the entity with DN: %s in the domain is missing the %s attribute. (0x33840108)
HPDAZ0265W
The entity with DN: %s was not removed as others are still using it. (0x33840109)
HPDAZ0266E
The Security Access Manager domain %s does not exist. (0x3384010a)
HPDAZ0267E
There is no Security Access Manager entity in the domain with ID %s. (0x3384010b)
HPDAZ0268E
Unable to modify membership of the group %s, it is likely a dynamic group. (0x3384010c)
HPDAZ0269E
The entity DN %s is already a member of the Security Access Manager domain. (0x3384010d)
HPDAZ0270E
The entity ID %s is already in use for the Security Access Manager domain. (0x3384010e)
HPDAZ0271E
The entity ID %s is missing it's registry entry. (0x3384010f)
HPDAZ0272E
The supplied DN, %s, to create the entity with has characters that are not valid. (0x33840110)
HPDAZ0273E
The supplied entity ID, %s, to create the entity with has characters that are not valid. (0x33840111)
HPDAZ0274E
The %s attribute value %s contains characters that are not valid. (0x33840112)
HPDAZ0275E
The %s attribute must be provided when creating the entity. (0x33840113)
HPDAZ0276E
The entity DN %s can not be created as it already exists. (0x33840114)
HPDAZ0277E
Failed to add entity DN %s to ADAM registry, the DN is likely invalid. (0x33840115)
HPDAZ0278E
None of the configured LDAP servers of the appropriate type for the operation can be contacted. (0x33840116)
HPDAZ0279E
The password must contain at least one character. (0x33840117)
HPDAZ0280E
There are more matching entries but the limit to return has been exceeded. (0x33840118)
HPDAZ0281E
The old password supplied was rejected by the LDAP server. (0x33840119)
HPDAZ0282E
The password contains spaces and the policy does not permit this. (0x3384011a)
HPDAZ0283E
The password contains the same character repeated consecutively more than is permitted by policy: %s. (0x3384011b)
HPDAZ0284E
The password is too short, the policy minimum is %s. (0x3384011c)
HPDAZ0285E
The password does not contain enough alphabetic characters, the policy minimum is %s. (0x3384011d)
HPDAZ0286E
The password does not contain enough non-alphabetic characters, the policy minimum is %s. (0x3384011e)
HPDAZ0287E
The password must not begin with the %s character. (0x3384011f)
HPDAZ0288E
A date value, %s, fetched from an LDAP value is not of form expected. (0x33840120)
HPDAZ0289E
The account has been disabled. (0x33840121)
HPDAZ0290E
The account has been locked out. (0x33840122)
HPDAZ0500E
Configuration error: This application server's account is marked invalid. (0x306591f4)
HPDAZ0501E
Configuration error: This application server's account is unknown. (0x306591f5)
HPDAZ0502E
Transmission error: No response from server at %s, port %d. (0x306591f6)
HPDAZ0503E
Transmission error: Could not connect to the server, and no alternative servers are configured. (0x306591f7)
HPDAZ0504E
Failover error: cannot contact a configured server. (0x306591f8)
HPDAZ0512E
The Security Access Manager custom registry adapter for WebSphere Virtual member manager (VMM) cannot update group membership
for group [ %s ] . Security Access Manager does not support nested groups. (0x38638200)
HPDAZ0514W
The LDAP server is an IBM Tivoli Directory Server and is running
in configuration only mode. Security Access Manager will not be able to
operate normally with the LDAP server in this mode. (0x33840202)
HPDAZ0600E
Invalid argument: Null URL on constructor. (0x30659258)
HPDAZ0601E
Invalid argument: Could not convert port number to an integer. (0x30659259)
HPDAZ0602E
Corrupted file: Insufficient information to contact a Policy Server. (0x3065925a)
HPDAZ0603E
Corrupted file: Insufficient information to contact an Authorization Server. (0x3065925b)
HPDAZ0604E
Invalid argument: Duplicate server specified. (0x3065925c)
HPDAZ0605E
Corrupted configuration: Cannot use keystore. (0x3065925d)
HPDAZ0768E
Value '%s' is not valid for option '%s'. It must be one of 'true' or 'false' (0x33840300)
HPDAZ0769E
Invalid value '%s' for option '%s'. It must be an integer in the range %s to %s (0x33840301)
HPDAZ0770E
Invalid value '%s' for option '%s'. The value must be a non-empty list of values separated by '%s' characters. (0x33840302)
HPDAZ0771E
The password for '%s' can not be zero characters in length. (0x33840303)
HPDAZ0772E
At least one LDAP server must be specified for option '%s'. (0x33840304)
HPDAZ0773E
Option '%s' has an LDAP server entry '%s' which is not valid. It must be of the form 'host:port:type:rank' (0x33840305)
HPDAZ0774E
Option '%s' has entry '%s' with a port value '%s' that is not valid. It must be an integer in the range 1 to 65535. (0x33840306)
HPDAZ0775E
Option '%s' has entry '%s' with a server type '%s' that is not valid. Use one of 'readwrite' or 'readonly' (0x33840307)
HPDAZ0776E
Option '%s' has entry '%s' with a server rank '%s' that is not valid. The rank must be an integer in the range 1 to 10. (0x33840308)
HPDAZ0777E
For option '%s' the '%s' must be a valid file that exists. (0x33840309)
HPDAZ0779E
The configuration properties file '%s' already exists. (0x3384030b)
HPDAZ0780E
An unknown configuration property name '%s' was provided. Use one of: %s. (0x3384030c)
HPDAZ0781E
The option '%s' is required and can not be removed. (0x3384030d)
HPDAZ0782E
Unable to create the configuration property file '%s', error '%s'. (0x3384030e)
HPDAZ0783E
Unable to write to configuration properties file '%s', error '%s'. (0x3384030f)
HPDAZ0784E
Unable to open configuration properties file '%s' for reading. Error '%s'. (0x33840310)
HPDAZ0785E
Unable to read propertes from configuration properties file '%s'. Error '%s' (0x33840311)
HPDAZ0786E
The input properties file is missing the required 'ldap.ssl-truststore' property. (0x33840312)
HPDAZ0787E
The input properties file is missing the required 'ldap.ssl-truststore-pwd' property. (0x33840313)
HPDAZ0788E
The input properties file is missing the required '%s' property. (0x33840314)
HPDAZ0789E
The configured suffix is not of the correct format '%s'. (0x33840315)
HPDBA0100E
No data accompanied the server response to the request. (0x10652064)
HPDBA0107E
Unable to map file %s, error (rc=%d). (0x1065206b)
HPDBA0108E
Unable to unmap file %s, error (rc=%d). (0x1065206c)
HPDBA0111E
The Tivoli Common Directory configuration file cannot be read. (0x1065206f)
HPDBA0112W
Serviceability messages will not be recorded in the Tivoli Common Directory. (0x10652070)
HPDBA0200E
The server Distinguished Name (DN) specified in the configuration file does not match the DN in the certificate received from the server. (0x106520c8)
HPDBA0202E
The keyfile is not configured or it could not be opened or accessed. (0x106520ca)
HPDBA0203E
The keyfile password is incorrect. (0x106520cb)
HPDBA0204E
The specified certificate could not be used because it does not exist or is otherwise invalid. (0x106520cc)
HPDBA0205E
The certificate presented by the SSL partner could not be successfully validated. (0x106520cd)
HPDBA0206E
The specified SSL V3 session time-out value is invalid. (0x106520ce)
HPDBA0207E
A communication error occurred while initializing the SSL connection. (0x106520cf)
HPDBA0208E
The requested action cannot be performed because the SSL environment is not initialized. (0x106520d0)
HPDBA0209E
The requested action cannot be performed because the SSL environment is already initialized. (0x106520d1)
HPDBA0210E
The SSL environment could not be closed. (0x106520d2)
HPDBA0211E
The SSL attribute could not be set because the value is invalid. (0x106520d3)
HPDBA0212E
The SSL environment could not be initialized. Ensure all required SSL configuration parameters are correct. (0x106520d4)
HPDBA0213E
The WinSock library could not be loaded. (0x106520d5)
HPDBA0214E
The SSL socket could not be initialized. Ensure all required SSL configuration parameters are correct. (0x106520d6)
HPDBA0215E
Information about the SSL session could not be determined. (0x106520d7)
HPDBA0216E
The SSL session could not be reset. (0x106520d8)
HPDBA0217E
The SSL session type cannot be set to client on a server. (0x106520d9)
HPDBA0218E
An error occurred writing data to an SSL connection. (0x106520da)
HPDBA0219E
An error occurred reading data from an SSL connection. (0x106520db)
HPDBA0220E
The partner's SSL certificate information could not be determined. (0x106520dc)
HPDBA0221E
The requested action could not be performed because the SSL client is already bound to the server. (0x106520dd)
HPDBA0222E
The TCP/IP host information could not be determined from the server hostname. Ensure that the server hostname is correct. (0x106520de)
HPDBA0223E
The SSL communication cannot be performed because the socket is invalid. (0x106520df)
HPDBA0224E
The specified authentication method is invalid. Ensure that the specified authentication method is a supported value. (0x106520e0)
HPDBA0225E
A configuration action could not be performed because the SSL server is already initialized and running. (0x106520e1)
HPDBA0228E
The data could not be sent over SSL because the buffer size was insufficient. (0x106520e4)
HPDBA0229E
The certificate or keyfile password is expired. (0x106520e5)
HPDBA0230E
The certificate label or DN is invalid. (0x106520e6)
HPDBA0231E
The date for the partner certificate is invalid. (0x106520e7)
HPDBA0232E
The type of the partner certificate is unsupported. (0x106520e8)
HPDBA0233E
No certificate was presented by the SSL partner. (0x106520e9)
HPDBA0234E
The SSL communications could not be completed. The socket was closed. (0x106520ea)
HPDBA0236W
The server could not locate the session for the client. (0x106520ec)
HPDBA0237E
The client is not bound. The client must be bound to perform this operation. (0x106520ed)
HPDBA0242W
The server could not find a handler for the command: (0x%x). (0x106520f2)
HPDBA0245E
GSKKM API failed. %s return (%d). (0x106520f5)
HPDBA0269E
The session performing the operation lost its credentials. (0x1065210d)
HPDBA0272E
The SSL keyfile name is invalid. (0x10652110)
HPDBA0273E
The SSL version is invalid. The specified version is incorrect or unsupported. (0x10652111)
HPDBA0274E
The SSL keyfile stash file name are invalid. (0x10652112)
HPDBA0275E
The client is not configured properly for this call. No replicas have been specified. (0x10652113)
HPDBA0276E
The server name is invalid. (0x10652114)
HPDBA0277E
The server port is invalid. (0x10652115)
HPDBA0279E
A domain must be specified for authentication. (0x10652117)
HPDBA0280E
An invalid Privilege Attribute Certificate (PAC) was specified. (0x10652118)
HPDBA0281E
An unexpected exception was caught. (0x10652119)
HPDBA0282E
An unknown exception was caught. No exception information is available. (0x1065211a)
HPDBA0285E
Automatic refresh could not be performed because of a GSKKM API error. (0x1065211d)
HPDBA0286W
An invalid data packet was received and discarded. (0x1065211e)
HPDBA0287E
Automatic refresh could not be performed because the certificate has expired. (0x1065211f)
HPDBA0288W
Automatic refresh of the certificate could not be performed because of error (0x%8.8x). (0x10652120)
HPDBA0289W
Automatic refresh of the certificate could not be performed because of error (0x%8.8x). (0x10652121)
HPDBA0292E
The certificate has expired or the date is invalid. (0x10652124)
HPDBA0293E
ICC API failed. %s returns %d, %s (0x10652125)
HPDBA0294W
Could not get ICC context. (0x10652126)
HPDBA0295W
Could not get ICC random number (0x10652127)
HPDBA0296E
The SSL communications could not be completed. An incorrectly formatted SSL message was received from the partner. (0x10652128)
HPDBA0297E
Timeout expired. The timeout period elapsed before obtaining a connection from the client to the server. (0x10652129)
HPDBA0298W
Certified FIPS mode is not available on this platform because the underlying FIPS provider is not currently certified. Security Access Manager will run in non-certified FIPS mode. (0x1065212a)
HPDBA0301E
The protected object policy specified was not found. (0x1065212d)
HPDBA0302E
Policy is attached to one or more protected objects. A policy cannot be deleted while it is still attached. (0x1065212e)
HPDBA0303E
A protected object policy with this name already exists. (0x1065212f)
HPDBA0305E
The protected object policy cannot be attached to the specified protected object. The protected object has been marked to not accept the protected object policy. (0x10652131)
HPDBA0306E
The ACL cannot be attached to the specified protected object. The protected object has been marked to not accept the ACL policy. (0x10652132)
HPDBA0309E
Invalid authorization rule text string. (0x10652135)
HPDBA0310E
The authorization rule specified was not found. (0x10652136)
HPDBA0311E
An authorization rule with this name already exists. (0x10652137)
HPDBA0312E
The authorization rule cannot be attached to the specified protected object. The protected object has been marked to not accept protected object policies. (0x10652138)
HPDBA0313E
The authorization rule is attached to one or more protected objects. The authorization rule cannot be deleted while it is still attached (0x10652139)
HPDBA0406E
ASN.1 decoding error. The version of ASN.1 encoded data was unexpected.The most likely cause is that the sender is at different version. (0x10652196)
HPDBA0407E
ASN.1 general error. Unsupported operation. (0x10652197)
HPDBA0408E
The ASN.1 data stream ended prematurely. (0x10652198)
HPDBA0409E
An ASN.1 integer value is too large. (0x10652199)
HPDBA0410E
ASN.1 data length is invalid. The data buffer is invalid. (0x1065219a)
HPDBA0411E
ASN.1 data invalid encoding. The data buffer contains unexpected data. (0x1065219b)
HPDBA0412E
ASN.1 data invalid parameter. (0x1065219c)
HPDBA0413E
ASN.1 indefinite data type is not allowed. The data buffer contains unexpected data. (0x1065219d)
HPDBA0414E
The ASN.1 data type must be primitive. The data buffer contains unexpected data. (0x1065219e)
HPDBA0415E
The ASN.1 type must be constructed. The data buffer contains unexpected data. (0x1065219f)
HPDBA0416E
An ASN.1 data value is not set. The data buffer contains unexpected data. (0x106521a0)
HPDBA0417E
The ASN.1 indefinite data type is not supported. The data buffer contains unexpected data. (0x106521a1)
HPDBA0418E
The unused bitcount is invalid for the ASN.1 bitstream type. The data buffer contains unexpected data. (0x106521a2)
HPDBA0419E
The segmented bitcount is invalid for the ASN.1 bitstream type. The data buffer contains unexpected data. (0x106521a3)
HPDBA0420E
An unexpected ASN.1 data type was found. The data buffer contains unexpected data. (0x106521a4)
HPDBA0421E
The ASN.1 data buffer is too long. The data buffer contains unexpected data. (0x106521a5)
HPDBA0422E
The ASN.1 data stream is missing members of a sorted set. The data buffer contains unexpected data. (0x106521a6)
HPDBA0423E
The ASN.1 choice index is out of range. (0x106521a7)
HPDBA0424E
The ASN.1 choice data type is not initialized. (0x106521a8)
HPDBA0425E
The ASN.1 asn_any data type has specific syntax. (0x106521a9)
HPDBA0426E
The ASN.1 utc/gmt time type has an invalid value. (0x106521aa)
HPDBA0427E
The ASN.1 UTF-8 string could not convert the string to or from the local code page. (0x106521ab)
HPDBA0428E
The specified codeset is not permitted for this ASN.1 data type. (0x106521ac)
HPDBA0605W
Warning mode is enabled for this protected object policy
(POP). Complete access to the protected object using this POP is permitted
regardless of other restrictions in the POP. (0x1065225d)
HPDBA0608E
Unable to map interface name '%s' to address. getaddrinfo returned error %d: %s. (0x10652260)
HPDBA0609E
Unable to auto refresh keystore %s. (0x10652261)
HPDBF0020E
The specified JRE (%s) version (%s) does not meet supported JRE version requirement.Consult the manual for a list of supported JREs. (0x30695014)
HPDBF0021E
This Java Runtime Environment (%s) has already been configured. Unconfigure first then retry the command. (0x30695015)
HPDBF0022E
This Java Runtime Environment (%s) has already been configured. Unconfigure first or specify a different JRE path then retry the command. (0x30695016)
HPDBF0025E
Unable to create the PD.properties file in the specified JRE.Ensure you have the correct permissions to do so. (0x30695019)
HPDBF0026W
Unable to rename the PD.properties file. (0x3069501a)
HPDBF0027E
An error occurred while creating PD.properties file. (0x3069501b)
HPDBF0029E
No JRE has been configured. Unable to unconfigure %s. (0x3069501d)
HPDBF0030W
The JRE (%s) is notconfigured for the Security Access Manager Runtime for Java. (0x3069501e)
HPDBF0031E
This Java Runtime Environment has already been configured. (0x3069501f)
HPDBF0032E
There was an internal error during initialization. (0x30695020)
HPDBF0073W
Unable to stop IBM WebSphere Application Server. (0x30695049)
HPDBF0075W
Unable to Regenerate IBM WebSphere Application Server Plugin Configuration. (0x3069504b)
HPDBF0078W
Unable to start IBM WebSphere Application Server. (0x3069504e)
HPDBF0080E
Unable to deploy Security Access Manager Web Portal Manager. (0x30695050)
HPDBF0083E
The Security Access Manager runtime must be configured first. (0x30695053)
HPDBF0084E
Unable to perform SvrSslCfg configuration forSecurity Access Manager Web Portal Manager. (0x30695054)
HPDBF0085E
Unable to find the iscwpm.war directory. Make sure that the WPM application is deployed in the WebSphere systemApps directory. (0x30695055)
HPDBF0086E
The WebSphere server installation full path is not valid.Possible causes are:
Make sure you have installed a supported version of WebSphere.
Make sure you have configured Security Access Manager Runtime for Java
to this WebSphere Java path. (0x30695056)
HPDBF0087E
The Security Access Manager Web Portal Manager has already been configured. (0x30695057)
HPDBF0088E
The Security Access Manager Web Portal Manager has already been unconfigured. (0x30695058)
HPDBF0089E
Unable to configure Security Access Manager Runtime for Java into the IBM WebSphere Application Server. (0x30695059)
HPDBF0091E
Security Access Manager Web Portal Manager could not be removedfrom WebSphere. Continuing with the unconfig operation. (0x3069505b)
HPDBF0094E
Unable to unconfigure Security Access Manager Runtime for Javafrom IBM WebSphere Application Server. (0x3069505e)
HPDBF0095E
The SvrSslCfg unconfiguration command cannot be performedfor Security Access Manager Web Portal Manager. (0x3069505f)
HPDBF0097E
IBM WebSphere Application Server plug-in configuration could not be regenerated. (0x30695061)
HPDBF0098E
The Windows registry could not be opened. (0x30695062)
HPDBF0099E
The registry key value could not be set. (0x30695063)
HPDBF0100E
The IBM HTTP server installation path could not be obtained. (0x30695064)
HPDBF0101E
The httpd.conf file could not be modified. SSL is not available for connecting toSecurity Access Manager Web Portal Manager. (0x30695065)
HPDBF0102E
The pdwpm.conf file could not be modified. (0x30695066)
HPDBF0116E
The port number is not valid. The port must be an integer greater than or equal to zero. (0x30695074)
HPDBF0119E
The local host name cannot be obtained. Specify the host name using the -
policysvr option. (0x30695077)
HPDBF0120E
Could not contact the Security Access Manager policy server. Possible causes are:The Policy server is not running.The Policy server host name or port number is incorrect. (0x30695078)
HPDBF0122E
The value specified for -action option (%s) was not valid.
The value must be one of the following: config|unconfig|status|name (0x3069507a)
HPDBF0153E
An error occurred backing up the data. (0x30695099)
HPDBF0154E
An error occurred restoring the archive. (0x3069509a)
HPDBF0155E
Could not resolve path for Security Access Manager runtime. (0x3069509b)
HPDBF0156E
Could not parse the line: %s. (0x3069509c)
HPDBF0157E
Could not backup the registry subkey: %s. (0x3069509d)
HPDBF0158E
Could not restore the registry subkey: %s. (0x3069509e)
HPDBF0171E
Could not resolve path for Security Access Manager runtime. (0x306950ab)
HPDBF0172E
The file, %s, could not be read. (0x306950ac)
HPDBF0178E
Error opening or reading the response file %s.
Ensure the file exists and that it contains the correct
stanza name, %s. (0x306950b2)
HPDBF0229E
The configuration action is invalid. Valid actions are 'create' or 'replace'. (0x306950e5)
HPDBF0230E
The port number is invalid. The port must be an integer greater than or equal to zero. (0x306950e6)
HPDBF0231E
The rank is invalid. The rank must be an integer. (0x306950e7)
HPDBF0232E
The format of the servers option is host1:port1:rank1,host2:port2:rank2,... (0x306950e8)
HPDBF0233E
An invalid server option was entered. The format of the server option is host:port:rank. (0x306950e9)
HPDBF0234E
Unable to load pd.properties. (0x306950ea)
HPDBF0235E
Invalid key file or configuration file name. (0x306950eb)
HPDBF0236E
The directory does not exist. (0x306950ec)
HPDBF0237E
The mode value is invalid. The value must be 'remote' or 'local'. (0x306950ed)
HPDBF0238E
The server option is invalid. Specify one policy server or authorization server parameter. (0x306950ee)
HPDBF0239E
The listening option is invalid. The value must be 'true' or 'false'. (0x306950ef)
HPDBF0240E
The refresh interval is invalid. The value must be an integer
greater than or equal to zero. (0x306950f0)
HPDBF0247E
The local host name cannot be obtained. Specify the host name using the -host option. (0x306950f7)
HPDBF0248W
The following options are ignored when configuring a remote-mode
server: %s (0x306950f8)
HPDBF0250E
The certificate refresh is invalid. The value must be true or
false. (0x306950fa)
HPDBF0275E
Invalid LDAP SSL information was entered. (0x30695113)
HPDBF0281E
Incorrect Security Access Manager administrator name or password. (0x30695119)
HPDBF0284E
The port number is invalid. The value must be greater than 0.: (0x3069511c)
HPDBF0287E
An error occurred while copying the template file. (0x3069511f)
HPDBF0290E
Security Access Manager runtime must be configured first. (0x30695122)
HPDBF0291E
Security Access Manager policy server has already been unconfigured. (0x30695123)
HPDBF0292E
The PDMgrProxyd service could not be deleted. (0x30695124)
HPDBF0293E
The PDMgrProxyd service could not be registered. (0x30695125)
HPDBF0294E
An error occurred opening configuration file. (0x30695126)
HPDBF0295E
An error occurred while unconfiguring the Security Access Manager proxy server. (0x30695127)
HPDBF0296E
A memory allocation error resulted in the termination of the program.
Check the maximum allowable memory and the amount of system paging space
as these may both need to be increased. (0x30695128)
HPDBF0297E
An error occurred while starting the Security Access Manager policy proxy server. (0x30695129)
HPDBF0340W
An error occurred while checking the properties of the target Java Runtime Environment (%s). The JRE might need post-configuration modification. (0x30695154)
HPDBF0341E
The Java Runtime Environment (%s) cannot be configured. Configure by using the pdjrtecfg command in non-interactive mode. (0x30695155)
HPDBF0342E
The Java Runtime Environment (%s) cannot be configured. (0x30695156)
HPDBF0343W
An error occurred while restoring the original state of the target Java Runtime Environment (%s). The JRE might need post-unconfiguration modification. (0x30695157)
HPDBF0344W
The temporary file %s cannot be deleted. Manually delete the file. (0x30695158)
HPDBF0350E
Unable to start Security Access Manager Web Portal Manager. (0x3069515e)
HPDBF0358E
Could not contact the Security Access Manager authorization server. Possible causes are:The Authorization server is not running.The Authorization server host name or port number is incorrect. (0x30695166)
HPDBF0359E
Could not contact the WebSphere server. Possible causes are:The WebSphere server is not running.The WebSphere server host name or port number is incorrect. (0x30695167)
HPDBF0360E
Could not find a IBM WebSphere Application Server or Cluster. Possible causes are:The WebSphere server host name or port number is incorrect.
The specified cluster or application server is invalid. (0x30695168)
HPDBF0361E
Invalid hostname for the Security Access Manager policy server. Possible causes are:The Policy server host name is incorrect. (0x30695169)
HPDBF0362E
Invalid hostname for the Security Access Manager authorization server. Possible causes are:The Authorization server host name is incorrect. (0x3069516a)
HPDBF0363E
Invalid hostname for the WebSphere server. Possible causes are:The WebSphere host name is incorrect. (0x3069516b)
HPDBF0364E
The required option (%s) was not specified. (0x3069516c)
HPDBF0380E
Unable to create the PDJLog.properties file in the specified JRE.Ensure you have the correct permissions to do so. (0x3069517c)
HPDBF0391E
The Security Access Manager Runtime for Java cannot run with the FIPS mode set. (0x30695187)
HPDBF0405E
The Security Access Manager Runtime for Java installed within the JRE (%s) version (%s) is outdated.Upgrade the Security Access Manager Runtime for Java. (0x30695195)
HPDBF0432E
A memory allocation error resulted in the termination of the program.
Check the maximum allowable memory and the amount of system paging space
as these may both need to be increased. (0x306951b0)
HPDBF0435E
An error occurred while copying the template file. (0x306951b3)
HPDBF0436E
Security Access Manager server has already been unconfigured.
from common and audit reporting services. (0x306951b4)
HPDBF0473E
The audit ID password is invalid. (0x306951d9)
HPDBF0474E
The audit server URL is invalid. (0x306951da)
HPDBF0475E
The audit cache file is invalid. (0x306951db)
HPDBF0476E
Incorrect Security Access Manager value for policysvr. The value should contain host:port:rank. (0x306951dc)
HPDBF0479E
Invalid value specified for -temp_storage_full_timeout.
Valid values are \'-1\', \'0\', and any positive integer. (0x306951df)
HPDBF0480E
The option -temp_storage_full_timeout is only valid when
-disk_cache_mode is set to \'auto\' or \'always\'. (0x306951e0)
HPDBF0495E
The -ldap_mgmt option must be either 'true' or 'false'. (0x306951ef)
HPDBF0496E
The -ldap_mgmt option must be set to 'true' to use the -ldap_svrs option. (0x306951f0)
HPDBF0497E
The -ldap_svrs opton must be set when -ldap_mgmt option is set to 'true'. (0x306951f1)
HPDBF0498E
The LDAP server option entered was not valid.The format of the LDAP server option is host:port:type:rank[,host1:port1:rank1[,...]] where type is one of 'readwrite' or 'readonly'. (0x306951f2)
HPDBF0499E
The LDAP server port number is not valid.The port must be an integer greater than 0 and less than 65536. (0x306951f3)
HPDBF0500E
The LDAP server type is not valid.The type must be one of 'readwrite' or 'readonly'. (0x306951f4)
HPDBF0501E
The LDAP server rank is not valid.The rank must be an integer from 0 to 10. (0x306951f5)
HPDBF0502E
The -ldap_mgmt option must be set to 'true' to use the -ldap_ssl_enable option. (0x306951f6)
HPDBF0503E
The -ldap_ssl_enable option must be either 'true' or 'false'. (0x306951f7)
HPDBF0504E
The -ldap_mgmt option must be set to 'true' to use the -ldap_ssl_truststore option. (0x306951f8)
HPDBF0505E
The file specified by the -ldap_ssl_truststore is not accessible. (0x306951f9)
HPDBF0506E
The -ldap_ssl_truststore option must be set to use the -ldap_ssl_truststore_pwd option. (0x306951fa)
HPDBF0507E
The -ldap_ssl_truststore_pwd option must be set to use the -ldap_ssl_truststore option. (0x306951fb)
HPDBF0526E
The Security Access Manager Runtime for Java cannot run as the WebSphere security standard does not match the configured compliance. (0x3069520e)
HPDBF0528E
The response file %s could not be deleted. (0x30695210)
HPDBF0531E
The SSL V3 protocol enable flag is invalid. The value must be true or
false. (0x30695213)
HPDBF0533E
The TLS V1.0 protocol enable flag is invalid. The value must be true or
false. (0x30695215)
HPDBF0535E
The TLS V1.1 protocol enable flag is invalid. The value must be true or
false. (0x30695217)
HPDBF0537E
The TLS V1.2 protocol enable flag is invalid. The value must be true or
false. (0x30695219)
HPDBG0001E
Unsupported operating system type: %s. (0x30696001)
HPDBG0003E
Login to the server failed. (0x30696003)
HPDBG0005E
This script must be executed by 'root' (uid = 0). (0x30696005)
HPDBG0017E
The policy server must first be installed in the secure domain.Install the Security Access Manager policy server on one of the systemsin your secure domain and retry the command. (0x30696011)
HPDBG0019W
The policy server is not running in this secure domain.Start the policy server and retry the command. (0x30696013)
HPDBG0028W
The parent directory does not exist.Cannot create the document root directory. (0x3069601c)
HPDBG0043W
Could not restart the server. (0x3069602b)
HPDBG0062W
The post-configuration phase of the package failed. (0x3069603e)
HPDBG0063W
The pre-configuration phase of the package failed. (0x3069603f)
HPDBG0064W
The package is already configured. (0x30696040)
HPDBG0066W
The pre-removal of the package has failed. (0x30696042)
HPDBG0087W
Could not contact the LDAP server. (0x30696057)
HPDBG0110W
The LDAP server is not available. (0x3069606e)
HPDBG0111W
Not authorized to perform the LDAP operation. (0x3069606f)
HPDBG0112W
Cannot connect to the LDAP server using SSL. (0x30696070)
HPDBG0113W
An unexpected LDAP error has occurred. (0x30696071)
HPDBG0114W
Unable to disable the Security Access Manager WebSEAL server. (0x30696072)
HPDBG0115W
Unable to disable the NetSEAL server. (0x30696073)
HPDBG0117W
LDAP client version %s does not appear to be installed.The LDAP client must be installed and configured in order to use the LDAP user registry. (0x30696075)
HPDBG0119W
Configure the net package before the trap package. The configuration failed. (0x30696077)
HPDBG0123W
Unconfigure the authorization server package before the base package. The unconfiguration failed. (0x3069607b)
HPDBG0131W
This package is partially configured.Unconfigure this package before configuring it. To unconfigure,return to the Security Access Manager Configuration Menu and select Exit. (0x30696083)
HPDBG0147W
Configure the Security Access Manager Runtime package before this package. The configuration failed. (0x30696093)
HPDBG0148W
Configure the Security Access Manager Runtime package before the Net package. The configuration has failed. (0x30696094)
HPDBG0149W
Configure the runtime package before the authorization server package. The configuration failed. (0x30696095)
HPDBG0150W
Unconfigure the policy server package before the runtime package. The unconfiguration failed. (0x30696096)
HPDBG0151W
Unconfigure the authorization server package before the runtime package. The unconfiguration failed. (0x30696097)
HPDBG0152W
Unconfigure the Net package before the runtime package. The unconfiguration failed. (0x30696098)
HPDBG0153W
Could not initialize the SSL configuration. (0x30696099)
HPDBG0154W
Could not initialize the Base SSL configuration. (0x3069609a)
HPDBG0163W
Install all required Security Access Manager packageson the system before running pdconfig. (0x306960a3)
HPDBG0164W
Configure the runtime package before the application developer kit. The configuration failed. (0x306960a4)
HPDBG0165W
Configure the runtime package before the console package. The configuration failed. (0x306960a5)
HPDBG0166W
Unconfigure the application developer kit before the runtime package. (0x306960a6)
HPDBG0167W
Unconfigure the console package before the runtime package. (0x306960a7)
HPDBG0192W
Unconfigure the Web package before the policy server package. The unconfiguration failed. (0x306960c0)
HPDBG0193W
Unconfigure the Web package before the runtime package. The unconfiguration failed. (0x306960c1)
HPDBG0205W
Some packages have not been upgraded yet.Upgrade the remaining packages and retry the command. (0x306960cd)
HPDBG0211W
Configure the policy server before the authorization server. The configuration failed. (0x306960d3)
HPDBG0212W
Configure the policy server before the net package. The configuration failed. (0x306960d4)
HPDBG0213W
Configure the policy server before the Web package. The configuration failed. (0x306960d5)
HPDBG0214W
The version of the installed LDAP client must be %s or higher. (0x306960d6)
HPDBG0215W
Security Access Manager policy server must be upgraded on the system. (0x306960d7)
HPDBG0217W
The LDAP server host name does not exist. (0x306960d9)
HPDBG0232E
Load the Security Access Manager schema entries. (0x306960e8)
HPDBG0275W
The necessary LiveCONTENT directory components have not been installed.They must be installed before configuration can continue. (0x30696113)
HPDBG0277W
Security Access Manager policy server (%s,%s) cannot be contacted. (0x30696115)
HPDBG0278E
Login to the Security Access Manager policy server failed.Ensure that the password is correct and the policy server is running, then retry the command. (0x30696116)
HPDBG0284E
Unable to read necessary files. Ensure read permission is set forthe current user on the following files located in the directory specifiedabove: ivmgrd.conf, ivmgrd.kdb, ivmgrd.sth, pdcacert.b64 (0x3069611c)
HPDBG0297W
Unconfigure the policy proxy server before the policy server. The unconfiguration failed. (0x30696129)
HPDBG0298W
Unconfigure the policy proxy server before the runtime package. The unconfiguration failed. (0x3069612a)
HPDBG0322E
The specified administrator ID is not authorized to configurethe server. Check the ID, password, and port and be sure the policy serveris configured and running. (0x30696142)
HPDBG0323E
The specified administrator ID is not authorized to configurethe server. Check the ID, password, and port and be sure the policy serveris configured and running. (0x30696143)
HPDBG0327E
LDAP client version %s does not appear to be installed.The LDAP client must be installed to use the Active Directory user registry. (0x30696147)
HPDBG0331E
The version of the installed %s must be %s or higher. (0x3069614b)
HPDBG0348E
The environment variable JAVA_HOME must be set to an existing valid JRE before executing this command. (0x3069615c)
HPDBG0349E
The LDAP client package %s, version %s does not appear to be installed. (0x3069615d)
HPDBG0350E
The Tivoli Common Logging directory cannot be a relative directory. (0x3069615e)
HPDBG0351E
The Tivoli Common Logging directory cannot be created. (0x3069615f)
HPDBG0358E
The management domain name, %s,already exists within LDAP. (0x30696166)
HPDBG0367E
Instance '%s' is already configured ('%s'). (0x3069616f)
HPDBG0812E
An Administrative account must be used to run this program. (0x3069632c)
HPDBG0813E
Security Access Manager registry entries could not be created. (0x3069632d)
HPDBG0826E
The %s service failed to start. (0x3069633a)
HPDBG0827E
The directory %s could not be created. (0x3069633b)
HPDBG0828E
The unconfiguration of the %s server failed. (0x3069633c)
HPDBG0829W
The %s service could not be deleted. (0x3069633d)
HPDBG0830E
The %s server could not be configured. (0x3069633e)
HPDBG0832E
The directory %s could not be created. (0x30696340)
HPDBG0836E
Could not create keytab directory: %s (0x30696344)
HPDBG0837E
Startup of Security Access Manager Policy Server failed. (0x30696345)
HPDBG0838E
Startup of Security Access Manager Security Server failed. (0x30696346)
HPDBG0839E
Startup of Security Access Manager Authorization Server failed. (0x30696347)
HPDBG0840E
An error occurred configuring the %s service. (0x30696348)
HPDBG0841E
Could not get configuration information from the Security Access Manager registry. (0x30696349)
HPDBG0843E
Could not stop the %s service. (0x3069634b)
HPDBG0844E
The %s package must be removed first. (0x3069634c)
HPDBG0857W
The Security Access Manager Policy Server is already configured in this secure domain.The Security Access Manager Policy Server must be removed completely before installing. (0x30696359)
HPDBG0858W
The Security Access Manager Policy Server appears to be configured on another machine in the secure domain. The local Security Access Manager Policy Server cannot be unconfigured. (0x3069635a)
HPDBG0957E
Error attempting to shutdown the system. (0x306963bd)
HPDBG0964E
ERROR: SecAuthority=Default suffix not found on LDAP server. Load secschema.def before configuring Security Access Manager (0x306963c4)
HPDBG0972W
Security Access Manager Policy Server must first be upgraded on this system. (0x306963cc)
HPDBG0973E
SecAuthority=Default suffix not found on LDAP server, Security Access Manager initialization of LDAP failed (0x306963cd)
HPDBG0991E
URAFCFG environment variable not set. (0x306963df)
HPDBG0992E
Notes_ExecDirectory environment variable not set. (0x306963e0)
HPDBG0993E
The Notes install directory is not in the PATH (0x306963e1)
HPDBG0994E
The EXTMGR_ADDINS parameter is not set in notes.ini. (0x306963e2)
HPDBG0997W
The notes.ini file does not exist in the Windows directory. (0x306963e5)
HPDBG1005E
Could not contact the LDAP server. Possible causes are:The LDAP server is not running.The LDAP server host name or port is incorrect.There is an SSL configuration mismatch between Security Access Manager and the registry server. (0x306963ed)
HPDBG1006E
Could not contact the Security Access Manager Policy Server.Ensure that you have specified a valid host name and port number and that Security Access Manager Policy Server is started before retrying this operation. (0x306963ee)
HPDBG1007W
Could not get the TCP/IP host name of local machine. (0x306963ef)
HPDBG1032W
You are not authorized to update the schema! (0x30696408)
HPDBG1049W
Unable to read necessary files. Make sure that the readpermission is set for the current user on the following files located inthe directory specified: ivmgrd.conf, ivmgrd.kdb, ivmgrd.sth, pdcacert.b64 (0x30696419)
HPDBG1054W
Cannot contact the host server.Possible causes are:The host server is not running.The host server name is incorrect. (0x3069641e)
HPDBG1056W
Could not contact the Domino server. Possible causes are:The Domino server is not running.The Domino server host name is incorrect.The Notes client password is incorrect for the active Notes ID file.Verify that information and then unconfigure and reconfigure the Runtime component with the correct values. (0x30696420)
HPDBG1080E
Could not contact the Security Access Manager Policy Server.Ensure that you have specified a valid ID, password and domain name and that Security Access Manager Policy Server is started before retrying this operation. (0x30696438)
HPDBG1083E
Error: Command %s failed (0x%x). Make sure java is in the path. (0x3069643b)
HPDBG1096E
The environment variable JAVA_HOME must be set to an existing valid JRE before executing this command. (0x30696448)
HPDBG1097E
The Security Access Manager License registry key is missing. (0x30696449)
HPDBG1098E
Security Access Manager License is not installed. (0x3069644a)
HPDBG1099E
Security Access Manager License is not at the required version level. (0x3069644b)
HPDBG1100E
Security Access Manager Policy Server must be unconfigured before it is removed. (0x3069644c)
HPDBG1101E
Security Access Manager policy proxy server must be unconfigured before it is removed. (0x3069644d)
HPDBG1102E
Security Access Manager Authorization Server must be unconfigured before it is removed. (0x3069644e)
HPDBG1104E
Could not contact the Active Directory server. Possible causes are:The Active Directory server is not running.The Active Directory Global Catalog server is not running.The Active Directory server host name or domain is incorrect. (0x30696450)
HPDBG1105E
The domain name is different from the local domain and Security Access Manager Policy Server is installed on this machine.If the Policy Server is to be configured on this machine, make sure the domain is correct.If Security Access Manager is configured with the Active Directory multiple domains option, make sure this domain is the root of the Active Directory forest. Policy Server must be installed and configured on the root domain of the forest.When using an LDAP client to communicate with the Active Directory server for a Security Access Manager blade server or user application it's necessary to remove the Security Access Manager Policy Server package then retry the configuration. (0x30696451)
HPDBG1106E
Invalid authentication information. Either the Active Directory admin ID doesn't exist or the admin password is incorrect. (0x30696452)
HPDBG1107E
Unable to locate the Active Directory data location information. Make sure the Active Directory domain is up and running or check to make sure the distinguished name for the data location exists on the Active Directory server before using it. (0x30696453)
HPDBG1120E
The pdcacert.b64 file could not be downloaded from the policy server. (0x30696460)
HPDBG1133W
The management domain location DN, %s, was not found in the LDAP server. Create the location DN on the LDAP server or specify a different one. (0x3069646d)
HPDBG1137E
The windows socket library could not be loaded. (0x30696471)
HPDBG1156E
The file %s could not be deleted. Errno %d (0x30696484)
HPDBG1167E
The parameter supplied for the -C paramter is not valid. (0x3069648f)
HPDBG1168E
The compliance type is not valid. It must be one of: 'none', 'fips', 'sp800-131-transition', 'sp800-131-strict', 'suite-b-128', 'suite-b-192'. (0x30696490)
HPDBG1169E
The compliance type is not valid. It must be one of: 'none', 'fips', 'sp800-131-transition', 'sp800-131-strict', 'suite-b-128', 'suite-b-192'. (0x30696491)
HPDBG1170E
The compliance value '%s' is not valid for ssl-compliance in pd.conf. It must be one of the following values: 'none', 'fips', 'sp800-131-transition', 'sp800-131-strict', 'suite-b-128', 'suite-b-192'. (0x30696492)
HPDBG1171E
A second policy server may be configured for standby purposes for AIX ONLY. (0x30696493)
HPDBI0162E
Ezinstall failed to complete successfully. (0x3078d0a2)
HPDBI0163E
The file, %s, could not be read. (0x3078d0a3)
HPDBI0170E
You must have administrator authority to run this program. (0x3078d0aa)
HPDBI0175E
The file, %s, could not be created. (0x3078d0af)
HPDBI0196E
The current %s version is %s. %s or higher is required. (0x3078d0c4)
HPDBI0215E
The backup or restore of the information failed. (0x3078d0d7)
HPDBI0217W
Start the %s and policy servers if they are not already started. (0x3078d0d9)
HPDBI0222E
Ezinstall is not supported on this platform. (0x3078d0de)
HPDBI0232E
Solaris version 2.7 or later is required to run the LDAP server. (0x3078d0e8)
HPDBI0237E %s could not be removed from the registry. (0x3078d0ed)
HPDBI0263E
Cannot upgrade the LDAP client. A previous version of the server exists. (0x3078d107)
HPDBI0264E
Upgrade the server first, then retry the command. (0x3078d108)
HPDBI0266E
Cannot upgrade Security Access Manager runtime because a previous version of the policy server exists. (0x3078d10a)
HPDBI0276E
Check that the server is configured properly and running. (0x3078d114)
HPDBI0283E
The %s server did not start properly. (0x3078d11b)
HPDBI0285E
An error occurred while installing %s patches. (0x3078d11d)
HPDCF0002E
A memory allocation error resulted in the termination of the program.
Check the maximum allowable memory and the amount of system paging space
as these may both need to be increased. (0x15e3a002)
HPDCF0003E
The file, %s, could not be opened. Ensure that file exists and that the file permissions allow access. (0x15e3a003)
HPDCF0004E
The file, %s, could not be read. Ensure that file exists and that the file permissions allow read access. (0x15e3a004)
HPDCF0005E
The current time could not be obtained. (0x15e3a005)
HPDCF0006E
The file, %s, could not be modified. Ensure that file exists and that the file permissions allow write access. (0x15e3a006)
HPDCF0009E
The installation directory could not be determined. Ensure that the product
is installed correctly. (0x15e3a009)
HPDCF0033E
The file, %s, is in use.You must stop the server or application before using this command. (0x15e3a021)
HPDCF0051E
The file, %s, was not found. (0x15e3a033)
HPDCF0052E
The request to change the key file password failed. (0x15e3a034)
HPDCF0053E
The request to renew the server certificate failed. (0x15e3a035)
HPDCF0054E
An operating system function for obtaining the local TCP/IP host name has failed. The error code is %d. (0x15e3a036)
HPDCF0055E
Socket initialization failed. The error code is %d. (0x15e3a037)
HPDCF0057E
A replica entry for the specified host name already exists in the configuration file. (0x15e3a039)
HPDCF0058E
A replica entry for the specified host name was not found in the configuration file. (0x15e3a03a)
HPDCF0059E
A replica entry in the configuration file is corrupted. (0x15e3a03b)
HPDCF0060E
The user registry type cannot be determined. Ensure that Security Access Manager
runtime is properly installed and configured. (0x15e3a03c)
HPDCF0061E
The function, %s, returned the error code: 0x%8.8lx. (0x15e3a03d)
HPDCF0062E
Could not connect to the Security Access Manager policy server. Error code is 0x%8.8lx.Ensure that the policy server host name, port and local domain name are correct. (0x15e3a03e)
HPDCF0074E
The keyring database files already exist. This indicates that the server might
already be configured or partially configured. (0x15e3a04a)
HPDCF0079E
SSL configuration failed. The error code is 0x%8.8lx. (0x15e3a04f)
HPDCF0084E
File %s is missing essential information.You must first use the -config action to create the initial configuration file. (0x15e3a054)
HPDCF0085E
The configuration file %s is not valid.Ensure that Security Access Manager runtime is properly configured. (0x15e3a055)
HPDCF0086E
The configured user registry type is not supported. (0x15e3a056)
HPDCF0101E
Configuration cannot be performed for server %s.File %s already exists.
The server might already be configured. (0x15e3a065)
HPDCF0104W
This usage is deprecated. Refer to the help for the correct usage of this command. (0x15e3a068)
HPDCF0116E
The keyring database or file, %s, could not be modified. Ensure that file exists and that the file permissions allow write access. (0x15e3a074)
HPDCF0117E
An error occurred in the IKeyMan API. Configuration failed. (0x15e3a075)
HPDCF0118E
Configuration failed. The specified configuration file does not exist
or you do not have the proper permissions to access the configuration file. (0x15e3a076)
HPDCF0120E
An application server with the specified name is already configured.
You must use a different name or unconfigure the existing application (0x15e3a078)
HPDCF0122E
If listen mode is enabled, the listening port must be specified with the -r parameter. (0x15e3a07a)
HPDCF0123E
The currently configured SSL listening port number cannot be zero if listening mode is enabled. (0x15e3a07b)
HPDCF0126W
The Security Access Manager policy server has been configured to disallow downloading of its CA certificate. A root CA certificate base64 file must be available on the local machine in order to configure. (0x15e3a07e)
HPDCF0127E
Download of the root CA certificate failed. Ensure that the
Security Access Manager policy server host and port are specified correctly and
that the correct version of the policy server is configured and running properly. (0x15e3a07f)
HPDCF0129W
The value %s of ca-cert-download-enabled keyword in ivmgrd.conf file is incorrect. Acceptable values are yes or no. Downloading of the secure domain's root CA certificate is disabled. (0x15e3a081)
HPDCF0133E
The Security Access Manager policy server is not responding. Verify the
host name and port, and verify that the server is started. (0x15e3a085)
HPDCF0134E
A listening port number of zero is allowed only if the
[aznapi-admin-services] stanza in the configuration file is empty. (0x15e3a086)
HPDCF0140E
The keyring database could not be located using the specified
configuration file. (0x15e3a08c)
HPDCF0157E
The specified configuration file does not exist or you do not have the proper permissions to access the file. (0x15e3a09d)
HPDCF0158E
The specified stanza/key pair does not exist in the specified configuration file. (0x15e3a09e)
HPDCF0159E
The specified configuration file may be corrupted. (0x15e3a09f)
HPDCF0160E
Unknown error occurred while reading and writing to the configuration file. (0x15e3a0a0)
HPDCF0161E
The configuration file is missing essential information. (0x15e3a0a1)
HPDCF0164E
Configuration failed. An error occurred creating the specified DN,
accessing a configuration file, or setting up the keyfile. (0x15e3a0a4)
HPDCF0165E
Cannot display configuration file information from the obfuscated version of the file. (0x15e3a0a5)
HPDCF0166E
Cannot modify information in the specified version of the configuration file because it exists in the alternate version. (0x15e3a0a6)
HPDCF0170E
Instance '%s' is already configured ('%s'). (0x15e3a0aa)
HPDCF0178E
The compliance entry, ssl-compliance in the ssl stanza, is not set in the Security Access Manager Runtime configuration file pd.conf. (0x15e3a0b2)
HPDCF0179E
The compliance value '%s' is not valid for ssl-compliance in pd.conf. It must be one of the following values: 'none', 'fips', 'sp800-131-transition', 'sp800-131-strict', 'suite-b-128', 'suite-b-192'. (0x15e3a0b3)
HPDCF0180E
The -C compliance value '%s' is not valid and must be one of the following values: 'none', 'fips', 'sp800-131-transition', 'sp800-131-strict', 'suite-b-128', 'suite-b-192'. (0x15e3a0b4)
HPDIA0204W
The user's password has expired. (0x132120cc)
HPDIA0205W
The user's account has expired. (0x132120cd)
HPDIA0206W
Login rejected due to policy violation. (0x132120ce)
HPDIA0207W
A PIN must be assigned to enable account (0x132120cf)
HPDIA0208W
User's account has been disabled. (0x132120d0)
HPDIA0209W
Next token required for authentication (0x132120d1)
HPDIA0210W
The login data entered could not be mapped to an Security Access Manager user (0x132120d2)
HPDIA0211W
A client certificate could not be authenticated. (0x132120d3)
HPDIA0212W
The data contained in the HTTP header %s failed authentication. (0x132120d4)
HPDIA0214W
IP address based authentication failed (0x132120d6)
HPDIA0215E
The supplied username does not exist in the registry. (0x132120d7)
HPDIA0216E
Administrator does not have permission to su to this account. (0x132120d8)
HPDIA0217W
Authentication by user %s denied at this time of day. (0x132120d9)
HPDIA0218W
Authentication by user denied at this time of day. (0x132120da)
HPDIA0219W
An unknown user, %s, was presented to Security Access Manager. (0x132120db)
HPDIA0221W
Authentication for user %s failed. You have used an invalid user name, password or client certificate. (0x132120dd)
HPDIA0222W
The client, %s, supplied invalid authentication information. (0x132120de)
HPDIA0223W
The authentication retry limit for user %s was reached. (0x132120df)
HPDIA0224W
The password for user %s has expired. (0x132120e0)
HPDIA0225W
The account for user %s has expired. (0x132120e1)
HPDIA0226W
The login for user %s was rejected due to a policy violation. (0x132120e2)
HPDIA0227W
The account for user %s has been disabled. (0x132120e3)
HPDIA0228W
A client certificate for user %s could not be authenticated. (0x132120e4)
HPDIA0229W
IP address authentication failed for address %s. (0x132120e5)
HPDIA0230E
The supplied username %s does not exist in the registry. (0x132120e6)
HPDIA0231E
Administrator %s does not have permission to use switch username on this account. (0x132120e7)
HPDIA0232W
The data contained in the HTTP header failed authentication. (0x132120e8)
HPDIA0233W
Authentication failed. You have used an invalid password. This account has been temporarily locked due to too many failed login attempts. (0x132120e9)
HPDIA0234W
Authentication failed. You have used an invalid password. This account has been disabled due to too many failed login attempts. (0x132120ea)
HPDIA0235W
Authentication for user %s failed. You have used an invalid password. This account has been temporarily locked due to too many failed login attempts. (0x132120eb)
HPDIA0236W
Authentication for user %s failed. You have used an invalid password. This account has been disabled due to too many failed login attempts. (0x132120ec)
HPDIA0237W
Authentication failed. The account could not be logged into as the password has expired. (0x132120ed)
HPDIA0238W
Authentication for user %s failed. The account could not be logged into as the password has expired. (0x132120ee)
HPDIA0239W
Authentication failed. The account is locked. (0x132120ef)
HPDIA0240W
Authentication for user %s failed. The account is locked. (0x132120f0)
HPDIA0241W
Authentication failed. The account is deactivated. (0x132120f1)
HPDIA0242W
Authentication for user %s failed. The account is deactivated. (0x132120f2)
HPDIA0300W
Password rejected due to policy violation. (0x1321212c)
HPDIA0301W
Password rejected due to minimum length policy. (0x1321212d)
HPDIA0302W
Password rejected due to the spaces policy. (0x1321212e)
HPDIA0303W
Password rejected due to the maximum repeated characters policy. (0x1321212f)
HPDIA0304W
Password rejected due to the minimum alphabetic characters policy. (0x13212130)
HPDIA0305W
Password rejected due to the minimum non-alphabetic characters policy. (0x13212131)
HPDIA0306W
This account has been temporarily locked out due to too many failed login attempts. (0x13212132)
HPDIA0307W
Post password change processing for user %s failed. (0x13212133)
HPDMG0155E
Too many subjects found within the client credential. (0x14c0109b)
HPDMG0156E
Unable to sign a certificate. Unexpected error from %s (0x%8.8lx). (0x14c0109c)
HPDMG0157E
The policy server failed to sign a certificate. (0x14c0109d)
HPDMG0158E
Could not open %s because the password stash file does not exist or is corrupted. (0x14c0109e)
HPDMG0160E
SSL database (ivmgrd.kdb) could not be opened. (0x14c010a0)
HPDMG0162E
ASN1 decode error %d occurred. The certificate buffer received is invalid and cannot be decoded. (0x14c010a2)
HPDMG0164E
The Policy Server could not be started (0x%8.8lx). (0x14c010a4)
HPDMG0165W
The application has received a database update notification however the version of the command is incorrect. The policy database will not be updated. (0x14c010a5)
HPDMG0166W
Memory allocation failure. Attempted to allocate %d bytes of memory. (0x14c010a6)
HPDMG0167E
Domain in the certificate to be signed does not match the local domain. (0x14c010a7)
HPDMG0453E
A server with the same name already exists. (0x14c011c5)
HPDMG0455W
The API function is not supported by this registry type. (0x14c011c7)
HPDMG0462E
The AZN application returned an error. (0x14c011ce)
HPDMG0463E
A protected object %s was requested from the %s application. The application returned the following error: (0x%8.8lx). (0x14c011cf)
HPDMG0464E
A list of child protected objects under the parent protected object %s was requested from the %s application. The application returned the following error: (0x%8.8lx). (0x14c011d0)
HPDMG0465E
An administration task was forwarded to the %s application. The application returned the following error: (0x%8.8lx). (0x14c011d1)
HPDMG0466E
A list of supported administration tasks was forwarded to the %s application. The application returned the following error: (0x%8.8lx). (0x14c011d2)
HPDMG0467E
A policy database update notification was sent to the %s application. The application returned the following error: (0x%8.8lx). (0x14c011d3)
HPDMG0609E
The specified group container cannot be used as it corresponds to an existing group name. (0x14c01261)
HPDMG0611E
This operation is not supported for the objects in this object space. (0x14c01263)
HPDMG0612E
The operation requested cannot be performed on the root object. (0x14c01264)
HPDMG0613E
One or more of the child object names was invalid. (0x14c01265)
HPDMG0614W
One or more ACL entries contain both the Add (A) and Password (W) capabilities. These capabilities potentially create a security vulnerability if they are granted to an administrator of a group. The administrator may then add any user to the group and then change the user's password. (0x14c01266)
HPDMG0615W
One or more ACL entries contain both the Add (A) and Modify (m) capabilities. These capabilities potentially create a security vulnerability if they are granted to an administrator of a group. The administrator may then add any user to the group and then change the user's data. (0x14c01267)
HPDMG0616W
One or more ACL entries contain both the Add (A) and Delete (d) capabilities. These capabilities potentially create a security vulnerability if they are granted to an administrator of a group. The administrator may then add any user to the group and then delete the user. (0x14c01268)
HPDMG0619E
The user is not authorized to view attached ACL information. (0x14c0126b)
HPDMG0620E
The user is not authorized to view attached POP information. (0x14c0126c)
HPDMG0621E
The user is not authorized to view attached Rule information. (0x14c0126d)
HPDMG0622E
The user is not authorized to view effective ACL information. (0x14c0126e)
HPDMG0623E
The user is not authorized to view effective POP information. (0x14c0126f)
HPDMG0624E
The user is not authorized to view effective Rule information. (0x14c01270)
HPDMG0625E
The user is not authorized to view one or more protected objects where the requested ACL is attached. (0x14c01271)
HPDMG0626E
The user is not authorized to view one or more protected objects where the requested POP is attached. (0x14c01272)
HPDMG0627E
The user is not authorized to view one or more protected objects where the requested authzrule is attached. (0x14c01273)
HPDMG0628E
The specified network addresses cannot be processed by the Security Access Manager policy server. (0x14c01274)
HPDMG0752E
More than one matching Distinguished Name (DN) was found. (0x14c012f0)
HPDMG0753E
An invalid format of the authorization mechanism attribute was found in the user entry. (0x14c012f1)
HPDMG0754W
The entry was not found. If a user or group is being created, ensure that the Distinguished Name (DN) specified has the correct syntax and is valid. (0x14c012f2)
HPDMG0755W
The specified Distinguished Name (DN) does not exist. (0x14c012f3)
HPDMG0756W
Incorrect current password. (0x14c012f4)
HPDMG0757W
The Distinguished Name (DN) is already configured as a user. (0x14c012f5)
HPDMG0758W
The Distinguished Name (DN) is already configured as a group. (0x14c012f6)
HPDMG0759W
The user name already exists in the registry. (0x14c012f7)
HPDMG0760W
The group name already exists in the registry. (0x14c012f8)
HPDMG0761W
The entry referred to by the Distinguished Name (DN) must be a person entry. (0x14c012f9)
HPDMG0762W
The entry referred to by the Distinguished Name (DN) must be a group entry. (0x14c012fa)
HPDMG0763E
LDAP is not configured as a registry of users and groups. (0x14c012fb)
HPDMG0764E
An internal error has occurred. (0x14c012fc)
HPDMG0765W
The request made to the LDAP server exceeded the server's configured time limit. (0x14c012fd)
HPDMG0766W
The search request exceeded the maximum number of entries the LDAP server is allowed to return. (0x14c012fe)
HPDMG0767E
The Distinguished Name (DN) has an invalid syntax. (0x14c012ff)
HPDMG0769E
There were insufficient LDAP access privileges to allow Security Access Manager to create and delete entries in the registry. (0x14c01301)
HPDMG0770E
The settings defined for the entry are invalid (object class violation). (0x14c01302)
HPDMG0771E
Cannot delete the entry completely because it has unexpected subentries in the LDAP registry. This is usually because the user or group being deleted is a member of another domain. (0x14c01303)
HPDRA0008E
Component name is invalid. (0x308fa008)
HPDRA0010E
The specified destination is invalid. (0x308fa00a)
HPDRA0011W
Serviceability component %s could not be registered for dynamic trace: 0x%x: %s (0x308fa00b)
HPDRA0064E
Unable to perform requested task: 0x%x: %s (0x308fa040)
HPDRA0065E
The requested task is incomplete or malformed. (0x308fa041)
HPDRA0066E
The requested task does not exist. (0x308fa042)
HPDRA0068E
The specified destination (%s) is invalid. (0x308fa044)
HPDRA0192E
Statistics gathering is already registered for this component. (0x308fa0c0)
HPDRA0193E
Statistics gathering is not registered for this component. (0x308fa0c1)
HPDRA0194E
Statistics gathering for this component is already on. (0x308fa0c2)
HPDRA0195E
Statistics gathering for this component is always on. (0x308fa0c3)
HPDRA0196E
Statistics gathering for this component is not on. (0x308fa0c4)
HPDRA0197E
The structure containing statistics gathering functions is invalid. (0x308fa0c5)
HPDRA1091E
The specified component has not been registered with the framework. (0x308fa443)
HPDRA1093E
The component is already writing transactional information to a file. (0x308fa445)
HPDRA1094E
A supplied transaction record is larger than the specified maximum file size: %d (0x308fa446)
HPDRA1095E
The filename must not contain any path information. (0x308fa447)
HPDRG0100E
The operation in the Active Directory registry for %s failed with return error %lx. (0x16b48064)
HPDRG0101E
The user password violates the Active Directory user password policies. (0x16b48065)
HPDRG0102E
An invalid user name or distinguished name (DN) was presented to Security Access Manager. The user name or DN may contain incorrect information, invalid characters or violates a registry user name limitation. (0x16b48066)
HPDRG0103E
The specified group is a dynamic group and dynamic group membership cannot be modified. (0x16b48067)
HPDRG0104E
The specified group is a registry dynamic group and Security Access Manager dynamic group support is not enabled. (0x16b48068)
HPDRG0105W
Unable to remove Security Access Manager meta data from Active Directory domain %s. Either the data doesn't exist in the Active Directory domain or this domain can not be contacted. (0x16b48069)
HPDRG0107E
The value of the userPrincipalName in the Active Directory registry is not unique. Duplicate userPrincipalName values are not allowed to be used for the Security Access Manager user or policy ID. (0x16b4806b)
HPDRG0108E
The Active Directory Global Catalog server may be down or unreachable. The Global Catalog is required to be up and reachable from the Security Access Manager configured Active Directory domain. (0x16b4806c)
HPDRG0109W
Unable to migrate user %s to the alternate userPrincipalName/e-mail format. Microsoft Active Directory Registry error: 0x%x. (0x16b4806d)
HPDRG0150E
The registry object could not be found. (0x16b48096)
HPDRG0151E
Unable to load the IBM Directory client library. (0x16b48097)
HPDRG0152W
Unable to contact the Policy Server to create the registry handle. The Policy Server may be down. (0x16b48098)
HPDRG0153E
Either Secure Socket Layer (SSL) support is not enabled or the SSL key file or key file password are missing or incorrect. If the 'change user password using LDAP APIs' option is enabled, SSL is required to be enabled with a valid key file and key file password. (0x16b48099)
HPDRG0154E
The Active Directory Global Catalog server hostname(s) is either missing or incorrect. The hostname(s) must be specified and reachable when the e-mail/UPN support is enabled. (0x16b4809a)
HPDRG0200E
The specified group is a dynamic group and cannot be modified. (0x16b480c8)
HPDRG0201E
Error code 0x%x was received from the LDAP server. Error text: %s. (0x16b480c9)
HPDRG0202E
Unable to load the IBM Directory client library. The LDAP registry cannot be initialized. (0x16b480ca)
HPDRG0203E
Unable to load the Access Control Information dynamic library. The LDAP registry cannot be initialized. (0x16b480cb)
HPDRG0204E
The LDAP server is an IBM Tivoli Directory Server proxy and the required cn=itamproxy container is missing. The Policy Server cannot be configured. (0x16b480cc)
HPDRG0205E
The LDAP server is an IBM Tivoli Directory Server proxy. The requested action cannot be performed with a proxy server. (0x16b480cd)
HPDRG0206E
The secAuthority=Default suffix is required but was not found on the LDAP server. The requested operation cannot be performed. (0x16b480ce)
HPDRG0207W
The LDAP server is an IBM Tivoli Directory Server and is running in configuration only mode. Security Access Manager will not be able to operate normally with the LDAP server in this mode. (0x16b480cf)
HPDRG0208E
The %s suffix is required but was not found on the LDAP server. The requested operation cannot be performed. (0x16b480d0)
HPDRG0209E
Ensure the LDAP administrator is a member of the CN=Administrators group of the partition. (0x16b480d1)
HPDRG0210E
The requested operation cannot be performed. Ensure SSL has been configured with the ADAM instance or the ADAM SSL requirement for password operations has been disabled. (0x16b480d2)
HPDRG0211E
The LDAP server reports a naming violation. Ensure the distinguished name (DN): %s is allowed by the LDAP server schema. (0x16b480d3)
HPDRG0212E
The IBM Tivoli Directory Server LDAP client does not provide the required function to support the ssl-compliance setting. (0x16b480d4)
HPDRG0213E
The ldap.conf file contains duplicate 'server' entries under the '[backend-servers]' stanza. (0x16b480d5)
HPDRG0214E
The ldap.conf file contains a 'suffix' value of '%s' under the '[%s]' stanza that is not unique. (0x16b480d6)
HPDRG0215E
The ldap.conf file stanza '[%s]' must contain at least one 'suffix' value. (0x16b480d7)
HPDRG0250E
A user that you tried to add to a group is already a member of that group (0x16b480fa)
HPDRG0251E
A user registry request to the Domino database failed with return code %lx. (0x16b480fb)
HPDRG0252E
The Domino error message is: %s (0x16b480fc)
WGAWA0192E
The runtime environment must be configured before invoking this command. (0x38a700c0)
WGAWA0193E
The tool is not supported on this system. (0x38a700c1)
WGAWA0194E
The file system on the USB drive could not be mounted. Please check the USB drive and then retry the command. (0x38a700c2)
WGAWA0195E
The log files could not be archived to the USB drive. (0x38a700c3)
WGAWA0198E
No log files are available for this selection. (0x38a700c6)
WGAWA0256E
Incorrect usage for the mesa_config %s command. (0x38a70100)
WGAWA0257E
A path which is not valid has been specified. (0x38a70101)
WGAWA0258E
Failed to copy the file, %s, to %s: %d (0x38a70102)
WGAWA0259E
Authorization for the requested command has been denied. (0x38a70103)
WGAWA0260E
The IBM Security Access Manager runtime environment is not configured. (0x38a70104)
WGAWA0261E
A web reverse proxy instance with the name %s has already been configured. (0x38a70105)
WGAWA0262E
The runtime environment has already been configured. (0x38a70106)
WGAWA0263E
The supplied file name, %s, must have a file extension of '%s'. (0x38a70107)
WGAWA0264E
The key database, %s, does not exist. (0x38a70108)
WGAWA0265E
An IP address which is not valid was located in the supplied entry: %s (0x38a70109)
WGAWA0266E
A matching interface was not found. (0x38a7010a)
WGAWA0267E
The %s parameter is required. (0x38a7010b)
WGAWA0268E
The supplied starting value of %ld is larger than the number of lines contained in the file (%ld) (0x38a7010c)
WGAWA0269E
An incorrect range was specified. The starting value (%ld) must be less than the ending value (%ld) (0x38a7010d)
WGAWA0270E
The pending changes cannot be committed as conflicts have been discovered between the staged and production files. (0x38a7010e)
WGAWA0271E
The IP address, %s, is already in use. (0x38a7010f)
WGAWA0272E
The %s interface is not a configured interface. (0x38a70110)
WGAWA0273E
One or more instances of the Web reverse proxy is still configured. These instances must be unconfigured first. (0x38a70111)
WGAWA0279E
An incorrect user name or password has been supplied. (0x38a70117)
WGAWA0280E
Examine the log of the Web Reverse Proxy instance for further information on the failure. (0x38a70118)
WGAWA0282E
The key database, %s, already exists. (0x38a7011a)
WGAWA0283E
The requested operation cannot proceed as there are pending changes which first need to be committed. (0x38a7011b)
WGAWA0284E
The configuration file for the %s instance is missing from the migration zip file. (0x38a7011c)
WGAWA0285E
An invalid filter rule was specified (%s) (0x38a7011d)
WGAWA0286E
The specified maximum file size exceeds the available space of %ld MB. (0x38a7011e)
WGAWA0287E
The system is already capturing network packets. The current capture operation must be stopped before the requested operation can be completed. (0x38a7011f)
WGAWA0301E
A packet capture file already exists on the system. The current file must be deleted before a new capture operation can be started. (0x38a7012d)
WGAWA0302E
The maximum capture file size has been reached. (0x38a7012e)
WGAWA0303W
The log file, %s, has been automatically purged from the system. (0x38a7012f)
WGAWA0304E
A management interface has already been configured with the same IP address: %s. (0x38a70130)
WGAWA0305E
An invalid activation code has been supplied. (0x38a70131)
WGAWA0307E
The server failed to start correctly. (0x38a70133)
WGAWA0309E
The server could not be stopped. (0x38a70135)
WGAWA0310E
The command is not supported with the current configuration. (0x38a70136)
WGAWA0313E
The supplied database name, %s, does not match any known databases. (0x38a70139)
WGAWA0314E
The user identity for the local database cannot be modified after the database has been created. (0x38a7013a)
WGAWA0315E
The database, %s, is not currently enabled. (0x38a7013b)
WGAWA0316E
Failed to obtain the state of the specified database: %s. (0x38a7013c)
WGAWA0317E
The server has already been started. (0x38a7013d)
WGAWA0318E
The cluster signature file could not be created. (0x38a7013e)
WGAWA0319E
The cluster signature file could not be validated. (0x38a7013f)
WGAWA0384E
The cluster master cannot currently be reached, and must be reachable in order to complete the operation. (0x38a70180)
WGAWA0385W
The specified node cannot currently be reached. (0x38a70181)
WGAWA0386E
The database server failed to start within the allocated time. (0x38a70182)
WGAWA0387W
The specified node, %s, is not a member of the cluster. (0x38a70183)
WGAWA0388E
A cluster master cannot be deregistered from the cluster. (0x38a70184)
WGAWA0389E
A cluster must be defined before this request can be processed. To define a cluster the primary master must be set to something other than 127.0.0.1. (0x38a70185)
WGAWA0390E
The port which has been specified for the cluster cannot be used because another service is already using one of the range of required ports. (0x38a70186)
WGAWA0391E
The signature file could not be created. (0x38a70187)
WGAWA0392E
The signature file could not be validated. (0x38a70188)
WGAWA0393E
The supplied signature file is not compatible with the local server. (0x38a70189)
WGAWA0394E
One or more Authorization server instances are still configured. These instances must be unconfigured first. (0x38a7018a)
WGAWA0395W
Failed to attach the ACL which is used to allow unauthenticated access to the favicon.ico resource. (0x38a7018b)
WGAWA0396E
The operation is not permitted on this key database. (0x38a7018c)
WGAWA0397E
The suffix, '%s', already exists. (0x38a7018d)
WGAWA0398E
The suffix, '%s', does not exist. (0x38a7018e)
WGAWA0399E
The suffix, '%s', is not valid. (0x38a7018f)
WGAWA0400E
The debug level, '%s', is not valid. (0x38a70190)
WGAWA0403E
Failed to export the configuration of the Web Reverse Proxy instance. (0x38a70193)
WGAWA0404E
The LMI account, %s, has been temporarily locked due to an excessive number of failed authentication attempts. (0x38a70194)
WGAWA0406E
The offering could not be activated because of a conflict with a currently activated offering. (0x38a70196)
WGAWA0407E
The key file could not be created because an existing key file already references a different Thales network HSM device. (0x38a70197)
WGAWA0408E
A connection could not be established to the device. Please ensure that the device is contactable, and that all of the supplied information is correct. (0x38a70198)
WGAWA0452E
The IP address of the first management interface cannot be changed while the appliance is acting as a master in the cluster. (0x38a701c4)
WGAWA0453E
The operation can only be performed on the primary master. (0x38a701c5)
WGAWA0454E
A required cluster master definition is missing from the cluster policy. (0x38a701c6)
WGAWA0455E
A required cluster definition is missing from the cluster policy. (0x38a701c7)
WGAWA0456E
The appliance is already a member of a cluster. (0x38a701c8)
WGAWA0457E
The first management interface must be enabled and configured with a static IP address in order to operate within a cluster. (0x38a701c9)
WGAWA0458E
The cluster node '%s' is currently engaged in data replication and can not be interrupted. (0x38a701ca)
WGAWA0459E
The Security Access Manager Runtime configuration mode '%s' is not valid. (0x38a701cb)
WGAWA0460E
The Security Access Manager Runtime is configured for non-clustered operation. (0x38a701cc)
WGAWA0461E
The Security Access Manager Runtime is configured for clustered operation. (0x38a701cd)
WGAWA0462E
An error occurred when attempting to validate the activation level of the remote server: %s (0x38a701ce)
WGAWA0463E
The server, %s, does not have all of the necessary offerings activated. (0x38a701cf)
WGAWA0464E
The server does not have all of the necessary offerings activated. (0x38a701d0)
WGAWA0465E
The server, %s, is a restricted node which cannot be promoted to a master role. (0x38a701d1)
WGAWA0466E
You cannot manage the IBM Security Access Manager security policy from this node as it is currently a restricted member of the cluster. (0x38a701d2)
WGAWA0467E
The property hvdb_driver_type is required when using an Oracle database. Valid values are 'thin' or 'oci'. (0x38a701d3)
WGAWA0603E
Failed to create the temporary file, '%s', for the database '%s': error '%s'. (0x38a7025b)
WGAWA0604E
Failed to obtain a list of SQL tables from the '%s' database. (0x38a7025c)
WGAWA0605E
Failed to open the temporary file, '%s', for the database '%s': error '%s'. (0x38a7025d)
WGAWA0606E
Failed to obtain a list of SQL tables from the '%s' database. (0x38a7025e)
WGAWA0607E
Failed to obtain the definitions of the SQL tables from the master '%s' database. (0x38a7025f)
WGAWA0640W
There are pending changes waiting to be deployed. (0x38a70280)