Configuring SNMP Services

You can configure SNMP services:

1. Open the Domino Administrator utility and authenticate with administrative credentials.
2. Click the Files tab, and the Monitoring Configuration (events4.nsf) document.
3. Expand the DDM Configuration Tree and select DDM Probes By Type.
4. Select Enable Probes, and then select Enable All Probes In View.
   Note: You might receive a warning when you complete this action. This warning is a normal outcome, as some of the probes require more configuration.
5. Select DDM Filter.

   You can either create a new DDM Filter or edit the existing DDM Default Filter.

6. Apply the DDM Filter to enhanced and simple events. Choose to log all event types.
7. Depending on the environment, you can choose to apply the filter to all servers in a domain or only to specific servers.
8. Click Save. Close when finished.
9. Expand the Event Handlers tree and select Event Handlers By Server.
10. Select New Event Handler.
11. Configure the following parameters:
    • Basic - Servers to monitor: Choose to monitor either all servers in the domain or only specific servers.
    • Basic - Notification trigger: Any event that matches the criteria.
    • Event - Criteria to match: Events can be any type.
    • Event - Criteria to match: Events must be one of these priorities (Check all the boxes).
    • Event - Criteria to match: Events can have any message.
    • Action - Notification method: SNMP Trap.
    • Action - Enablement: Enable this notification.
12. Click Save. Close when finished.

    You are now ready to configure the log source in IBM QRadar.