Adding IBM QRadar Risk Manager to IBM QRadar SIEM Console

You must add IBM® QRadar Risk Manager as a managed host to IBM QRadar SIEM Console.

1. Open your web browser.
2. Type the URL, https://<IP Address>, where <IP Address> is the IP address of the QRadar Console.
3. Type your user name and password.
4. On the navigation menu ( ), click Admin.
5. In the System Configuration pane, click System and License Management.
6. In the System and License Management window, click Deployment Actions, and then select Add Host.
7. Enter values for the following parameters:

   Option	Description
   Host IP	The IP address of QRadar Risk Manager.
   Host Password	The root password for the host.
   Confirm Host Password	Confirmation for your password.
   Encrypt Host Connections	Creates an SSH encryption tunnel for the host. To enable encryption between two managed hosts, each managed host must be running QRadar Console V7.1 or QRadar Risk Manager V7.1.
   Encryption Compression	Enables data compression between 2 managed hosts.
   Network Address Translation	To enable NAT for a managed host, the NATed network must be using static NAT translation. For more information, see the IBM QRadar Administration Guide.

8. If you select the Network Address Translation check box, then you must enter values for the NAT parameters:

   Option	Description
   NAT Group	The network that you want this managed host to use. If the managed host is on the same subnet as the QRadar Console, select the console of the NATed network. If the managed host is not on the same subnet as the QRadar Console, select the managed host of the NATed network.
   Public IP	The public IP address of the managed host. The managed host uses this IP address to communicate with other managed hosts in different networks that use NAT.

9. Click Add.
   This process can take several minutes to complete. If your deployment includes changes, then you must deploy all changes.
10. From the Admin tab, click Advanced > Deploy Full Configuration.