Configuring Your Huawei AR Series Router
To forward syslog events to IBM® QRadar®, you must configure your Huawei AR Series Router as an information center, then configure a log host.
About this task
The log host that you create for your Huawei AR Series Router can forward events to your QRadar Console or an Event Collector.
- Log in to your Huawei AR Series Router command line Interface (CLI).
Type the following command to access the system view:
Type the following command to enable the information center:
Type the following command to send informational level log messages to the default
info-center source default channel loghost log level informational debug state off trap state off
To verify your Huawei AR Series Router source configuration, type the command:
display channel loghost
Type the following command to configure the IP address for QRadar as the log host for your
info-center loghost <IP address> facility <local>
- <IP address> is the IP address of the QRadar Console or Event Collector.
- <local> is the syslog facility, for example, local0.
info-center loghost <IP_address> facility local0
Type the following command to exit the configuration:
The configuration is complete. You can verify events that are forwarded to QRadar by viewing events on the Log Activity tab.