Removing and replacing the outer slide-rails
Learn how to remove and replace the outer slide-rails.
To remove and replace the outer slide-rails, complete the following steps:
- Remove the rear bracket of the outer slide-rail from the rack by pulling the blue
tab out 1 while you move the end of the slide-rail away from the rack flange and toward the
center of the rack 2.
- Remove the front bracket of the outer slide-rail from the rack by pulling the
blue tab out 1 while you pull the end of the slide-rail away from the rack flange and toward
the center of the rack 2. Repeat step 1 and 2 for the
other outer slide-rail.
- Remove the shipping screw from each new outer slide-rail.
- To attach the outer slide-rail to the rack, complete the following steps.Note: Install the rear slide-rail bracket to the rear of the rack first; then, install the front slide-rail bracket to the front of the rack.
- Holding the slide-rail horizontally, align the rear slide-rail bracket so that the bracket is on the outside of the rack mounting flanges.
- Press the rear slide-rail bracket towards the rack flange and then pull it towards the front of
the rack until the locking bracket clicks into place behind the rack flange.
- Extend the slide-rail and press the front slide-rail bracket towards the
rack flange and then push it towards the rear of the rack until the locking bracket clicks into
place behind the rack flange.
- Repeat steps 4.a to 4.c to attach the other outer slide-rail.