subscribe iconSubscribe to this information
POWER7 information

Function 63: Display system status SRCs

When you select function 63 and press Enter, you can display up to the last 25 system status SRCs. This function is available only in the manual operating mode.

The following table shows an example of how to display the last 25 system status SRCs.
Table 1. Function 63: Display system status SRCs
Function/Data Action or description 
6 3 _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to scroll to function 63. 
6 3 * * _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to enter subfunction mode. 
6 3 1 8 _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to select the address offset.
Note: Enter a subfunction between 00 and 18 to view the SRCs in sequential order. The most recent SRC displays at the highest possible subfunction number (18). If no system status SRCs exist, then only subfunction 00 is available and it will not display an SRC when selected.
 
C 1 0 0 1 0 3 4 _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to read the SRC data. 
6 3 * * _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to select subfunction exit. 
6 3 _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to exit subfunction mode.
Parent topic: Customer-extended panel functions

Send feedback | Rate this page

Last updated: Thu, October 10, 2013