POWER7 information

Function 55: View and change platform system dump data

This function allows you to view and change the platform dump data. This function is available only in the manual operating mode.

When you select function 55 and press Enter, you can view and change the platform system dump collection policy, platform system dump hardware content, and platform system dump firmware content settings.

The following table shows an example of how to view the platform system dump data.

Table 1. Function 55: View the platform system dump data
Function/Data	Action or description
`5 5 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Use the Increment or Decrement buttons to scroll to function 55.
`5 5 * * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Press Enter to enter subfunction mode.
`5 5 0 0 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Use the Increment or Decrement buttons to view the platform system dump variables.
`5 5 0 0 _ xxyyzz_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Press Enter to process the selected subfunction. `xx` = Collection policy `yy` = Hardware content `zz` = Firmware content
`5 5 * * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Use the Increment or Decrement buttons to select subfunction exit.
`5 5 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Press Enter to exit subfunction mode.

The following table shows an example of how to change the platform system dump data.

Table 2. Function 55: Change the platform system dump data
Function/Data	Action or description
`5 5 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Use the Increment or Decrement buttons to scroll to function 55.
`5 5 * * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Press Enter to enter subfunction mode.
`5 5 0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Use the Increment or Decrement buttons to select to change the platform system dump variable. `01` = Set platform system dump collection policy to disable `02` = Set platform system dump collection policy to enable `03` = N/A - will always display FF in Line 1 when selected `04` = Set platform system dump hardware content to maximum `05` = Set platform system dump hardware content to automatic `06` = N/A - will always display FF in Line 1 when selected `07` = N/A - will always display FF in Line 1 when selected `08` = Set platform system dump firmware content to automatic `09` = Set platform system dump firmware content to maximum `0A` = Set platform system dump firmware content to physical I/O `0B` = Set platform system dump firmware content to virtual I/O `0C` = Set platform system dump firmware content to HPS cluster `0D` = Set platform system dump firmware content to Host Channel Adapter (HCA)
`5 5 0 2 _ 0 0 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Press Enter to process the selected subfunction. `00` = Accept `FF` = Reject
`5 5 * * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Use the Increment or Decrement buttons to select subfunction exit.
`5 5 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _`	Press Enter to exit subfunction mode.

Send feedback | Rate this page

Last updated: Thu, October 10, 2013