The device terminating plug might be failing.
Complete the following steps:
- Find the IOA type:
- Find the IOA location information in the service action log if
it is available. If the location is not available, find the address
of the IOA. See the System
reference code format description. Use the address to find the location. See Part locations and location codes.
- Find the IOA card in the system and read the type number of the
card at that location.
- Use the information in the following table to determine the failing
terminating plug.
| Storage IOA type |
Action |
|---|
| 2749 |
For device types 3490, 3570, 3590, 3995, and 7208, see FI00880. For all other devices, use part
number 85F7887. |
| 5702/571A |
Use part number 23R5841. |
| All others |
The terminator is integrated into the backplane and not a separate
failing item. |
- Replace the failing item. Note: If the terminating plug is located
on a backplane, go to symbolic FRU BACKPLN.
Follow the procedure until the terminating plug is accessible and
then remove or replace the plug.
This ends the procedure.
Subscribe to this information