LICIP14

Licensed Internal Code detected a card slot test failure.

1. Has the I/O adapter moved to a new card location?
   • Yes: Continue with the next step.
   • No: Go to step 4.
2. Perform one of the following, and then continue with the next step:
   • Use the concurrent maintenance option in Hardware Service Manager in SST/DST to power off, remove, reinsert, and power on the I/O adapter.

     OR

   • Power off the system, remove and reinsert the I/O adapter. Then IPL the system.
3. Does the reference code occur again for this same I/O adapter?
   • Yes: Continue with the next step.
   • No: No further service action is needed.

     This ends the procedure.

4. Move the I/O adapter to a different card location, that has no I/O processors in the PCI bridge set, by performing one of the following, and then continue with the next step:
   • Use the concurrent maintenance option in Hardware Service Manager in SST/DST to power off, remove the I/O adapter, install the I/O adapter in a different card location, and power on the I/O adapter.OR
   • Power off the system, remove the I/O adapter, install the I/O adapter in a different card location, and then IPL the system.
5. Does the same reference code occur again for this I/O adapter?
   • Yes: Replace the I/O adapter.

     This ends the procedure.

   • No: Replace the backplane.

     This ends the procedure.