Use the procedures in this topic to isolate the problem.
Bus, high-speed link (HSL or RIO) isolation procedures
Symbolic FRUs, failing items (FIs), and bus isolation procedures
use the terms "partition" and "logical partition" to indicate any
single partition in a system that has multiple partitions. If the system you
are working on does not have multiple partitions, then the terms refer to
the primary partition.
Communication isolation procedure
This topic contains the procedure necessary to isolate a communications
failure. Please read and observe the following warnings when using this procedure.
Twinaxial workstation I/O processor isolation procedure
Use the procedure below to isolate a failure which has been detected
by the twinaxial workstation I/O processor. If you are using a personal computer,
an emulation program must be installed and working.
Workstation adapter isolation procedure
Contains the procedure necessary to isolate a failure that is detected
by the workstation adapter, and is used when no display is available with
which to perform on-line problem analysis.