HSCL06xx error codes

These error codes can be displayed in a window that is displayed on the HMC screen during system configuration and operations.
Back to HSCL error codes page
HSCL06xx error codes Message Recovery action
HSCL0601 Cannot create partition with bootable definition state setting.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the operation.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0602 Partition with the same ID is already defined in the managed system.
  1. Check the entry and try again.
  2. Rebuild the managed system. For details, see Updating managed system or frame information.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0604 Could not read the dump.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0605 The initialize dump request failed because the managed system is already in the process of creating a dump of the specified type. The keylock position of the managed system needs to be set to manual mode.
HSCL0607 Dump partition does not exist.
  1. Ensure that the dump partition has been mounted.
  2. Retry the operation.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0608 Could not mount the dump partition.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0611 Could not read dump as a temporary file.
  1. Ensure that the dump partition has been mounted and has an access to it.
  2. Retry the operation.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0612 Could not process dump header.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0613 Could not query the dump.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0616 Cannot use the 5250 CPW setting. Check whether the setting is valid.
  1. Ensure the 5250 CPW setting is correct.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0619 Cannot use the I/O setting for allocation. Check whether the setting is valid.
  1. Check the I/O setting is valid.
  2. Rebuild the managed system. For details, see Updating managed system or frame information.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL061A Cannot use the virtual I/O setting for allocation. Check whether the setting is valid.
  1. Check that the setting is valid
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL061B Operation failed to set partition activation policies.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL061C Operation failed to allocate memory for the partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL061D Operation failed to allocate virtual I/O for the partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL061E Operation failed to allocate 5250 CPW for the partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL061F Operation failed to allocate processing resource for the partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0620 Operation failed to allocate I/O slots for the partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0621 Cannot use the LPAR profile for partition operation since its dedicated processor setting is not correct. Check the processor setting in the profile, and ensure the setting is valid.
  1. Check the processors settings
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0622 Cannot use the LPAR profile for partition operation since its shared processor setting is not correct. Check the processor setting in the profile, and ensure the setting is valid.
  1. Check the processors settings
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0623 Partition cluster ID cannot be modified when the partition is not in the Not Activated state.
  1. Ensure the partition is in Not Activated state.
  2. Rebuild the managed system. For details, see Updating managed system or frame information.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0624 Unable to launch Update Password Dialog. Try again.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0625 Cannot activate partition when the managed system state is not in the Operating or Standby state.
  1. Ensure the partition is in Operating or Standby state.
  2. Rebuild the managed system. For details, see Updating managed system or frame information.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0626 Cannot find the LPAR profile to activate the partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0627 The virtual I/O specified for tagged I/O is not valid.
  1. Check that the setting is valid.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0628 Resource specified as load source must be required.
  1. Ensure the load source device is specified as required.
  2. Retry the operation.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0629 Must specify resource for load source setting.
  1. Ensure the load source device is specified as required.
  2. Retry the operation.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL062A Cluster ID specified, {0}, is greater than maximum allowable value, {1}.
  1. Ensure the setting is valid.
  2. Retry the operation.
HSCL062B Cannot change maximum virtual I/O Slots value when partition is not in the Not Activated state.
  1. Ensure the setting is valid.
  2. Retry the operation.
HSCL062D The partition is currently in a state of Running, Initializing or Open Firmware, and cannot be deleted. A partition cannot be deleted when it is in Running, Initializing, or Open Firmware state.
  1. Deactivate the partition and retry the operation.
  2. If you believe that the partition is already stopped, rebuild the managed system. For details, see Updating managed system or frame information.
  3. Retry the operation.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL062E Unable to shut down the partition using operation system command.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL062F You must select one profile to activate the partition with or select Cancel.
  1. Only one partition profile can be used to activate a partition. Either retry the operation, selecting a profile to activate the partition with, or select Cancel.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0630 Could not display the partition activate advance dialog for partition: {0}. Try the operation again.
  1. Refresh the graphical user interface and retry the operation. For details, see Updating managed system or frame information.
  2. Log off and then log back in to the HMC and try the operation again.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0631 Could not display the partition reboot dialog. Try the operation again.
  1. Refresh the graphical user interface and retry the operation. For details, see Updating managed system or frame information.
  2. Log off and then log back in to the HMC and try the operation again.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0632 Could not perform the reboot partition operations. Refresh the interface and check whether the operation was performed. If not, try the operation again.
  1. Refresh the interface and check whether the operation was performed.
  2. If not, rebuild the managed system. For details, see Updating managed system or frame information.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0633 Could not display the partition shut down dialog. Try the operation again.
  1. Refresh the graphical user interface and retry the operation. For details, see Updating managed system or frame information.
  2. Log off and then log back in to the HMC and try the operation again.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0634 Could not perform the shut down partition operations. Refresh the interface and check whether the operation was performed. If not, try the operation again.
  1. Refresh the interface and check whether the operation was performed.
  2. If not, rebuild the managed system. For details, see Updating managed system or frame information.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0635 Could not display the change default profile dialog. Try the operation again.
  1. Refresh the graphical user interface and retry the operation. For details, see Updating managed system or frame information.
  2. Log off and then log back in to the HMC and try the operation again.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0636 Unable to modify processing information of the partition with ID of {0}. The information could be out of sync. Rebuild the managed system and try again.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0637 Unable to modify processing information of the partition with ID of {0}. The information could be out of sync. Rebuild the managed system and try again.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0638 Unable to modify 5250 CPW information of the partition with ID of {0}. Rebuild the managed system and try again.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0639 Unable to modify OptiConnect setting of the partition with ID of {0}. Rebuild the managed system and try again.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL063A Unable to extract partition's virtual I/O information.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL063B Failed to set I/O adapter {0} for the partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL063C Failed to set tagged I/Os for the partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL063D Failed to change the partition's processor type.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL063E Failed to change the partition's processor settings.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL063F Cannot assign a storage device under I/O processor to AIX/Linux partition.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0640

OptiConnect Pool IDs may only be set on i5/OS® partitions.
  1. Rebuild the managed system. For details, see Updating managed system or frame information.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0641 Cannot activate a profile using full system resources while other partitions are powered on.
  1. Ensure there are no partitions running.
  2. Rebuild the managed system. For details, see Updating managed system or frame information.
  3. Retry the task.
  4. If the problem persists, contact your next level of support or your service provider.
HSCL0642 Partition ID specified is over max number of partition supported by the system. Check the entry and try again.
  1. Ensure the partition ID specified does not exceed the maximum number of logical partitions supported.
  2. Retry the task.
  3. If the problem persists, contact your next level of support or your service provider.
HSCL0643 Virtual I/O server command {0} for partition {1} failed. The I/O server command for the partition failed. The reason or cause is included in the error message. Check the command and retry. If the error persists, contact your next level of support or your service provider.
HSCL0644 The number of processing units must be less than or equal to the number of virtual processors. In the partition profile properties, make sure the number of processing units is less than or equal to the number of virtual processors.
HSCL0645 The ratio of processing units to virtual processors must be equal to or greater than {0}. In the partition profile properties, make sure the ratio of processing units to virtual processors is equal to or greater than the value that is specified.
HSCL0646 Processor pool ID specified is over maximum processor pools system allowed. Make sure the processor pool ID specified is not over the maximum processor pools system allowed.
HSCL0647 The workload group setting for the partition could not be changed. Try the operation again. If the problem persists, contact your technical support provider.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0648 The setting for power controlling partitions could not be changed. Try the operation again. If the problem persists, contact your technical support provider.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL0649 The opticonnect settings for the partition could not be changed. Try the operation again. If the problem persists, contact your technical support provider.
  1. Retry the operation.
  2. If the problem persists, contact your next level of support or your service provider.
HSCL064A Cannot use the SMA setting for allocation. Check whether the setting is valid.  
HSCL064B Cannot use the HCA setting for allocation. Check whether the setting is valid. Ensure that this HCA adapter is not allocated to another Active partition and retry the operation.
HSCL0650

An i5/OS partition or profile is not allowed to use all the resources in a IBM® System p5® or IBM eServer™ p5 server.

  
HSCL0651

The maximum number of processors specified exceeds the i5/OS processor capacity limit of {0} processors for the managed system. Reduce the number and try again.
  1. Reduce the number specified for the maximum number of processors to a number that is less than or equal to the i5/OS processor capacity limit for your managed system.
  2. Try the task again.
HSCL0652

The maximum number of processing units specified exceeds the i5/OS processor capacity limit of {0} processing units for the managed system. Reduce the number and try again.
  1. Reduce the number specified for the maximum number of virtual processors to a number that is less than or equal to the i5/OS processor capacity limit for your managed system.
  2. Try the task again.
HSCL0653

The maximum number of virtual processors specified exceeds the i5/OS processor capacity limit of {0} processors for the managed system. Reduce the number and try again.
  1. Reduce the number specified for the maximum number of processing units to a number that is less than or equal to the i5/OS processor capacity limit for your managed system.
  2. Try the task again.
HSCL0654 The HCA device {0} has a hardware error. You cannot active the profile containing a GUID from this device. Clear the adapter configuration from the profile and try again or contact your service provider. If the device is needed for the partition, contact your next level of support or service provider.
HSCL0655 The profile contains a GUID for an HCA device {0} not managed by the HMC. Clear the adapter configuration from the profile and try again. If the device should be managed from the HMC, or if the device is needed for the partition, contact your next level of support or service provider.