Table 1. (BCxx) Base motherboard controller progress codes
BMC Progress Code | Description/Action Perform all actions before exchanging Failing Items | Failing Items |
---|---|---|
BC00 | Set up the system clock and voltage regulator module (VRM) | BPCHANG |
BC01 | Set system clock spread spectrum | BPCHANG |
BC02 | Set system clock spread spectrum | BPCHANG |
BC03 | Collection of VPD from the processor and U3 module | BPCHANG |
BC04 | The PLL and the internal clock on the U3 module are being set up | BPCHANG |
BC05 | The PLL and the internal clock on the U3 module are being set up | BPCHANG |
BC06 | Initialization of the Super I/O chip | BPCHANG |
BC07 | Boot block recover set up of the Super I/O chip | BPCHANG |
BC08 | Set up mode rings on the processor | BPCHANG |
BC09 | Set up the elastic interface | BPCHANG |
BC0A | Tune the elastic interface | BPCHANG |
BC0B | Receiver initial align pattern | BPCHANG |
BC0C | Receiver initial align pattern | BPCHANG |
BC0D | Set up the fuse rings | BPCHANG |
BC0E | Set up the fuse rings | BPCHANG |
BC0F | More tuning of the elastic interface | BPCHANG |