Function 43: Service processor dump

This function initiates a service processor dump. This function is available only in the manual operating mode.

You must perform two consecutive function 43 selections to initiate a service processor dump.

To initiate the platform dump in FSP, complete the following steps:
  1. Navigate to function 43 on the op-panel.
  2. Press Enter to bring up the confirmation SRC.

    The display shows A1703043.

  3. Press Enter.

    The display shows 43.

  4. Press Enter to start the dump.
Table 1. Function 43: Start a platform system dump for FSP
Function/Data Action or description 
4 3 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use <Increment>/<Decrement> buttons and scroll to function 43. 
A 1 7 0 3 0 4 3 _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 The debounce SRC will be displayed. 
4 3 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press <Enter> to start the dump.
To initiate the platform dump in BMC, complete the following steps:
  1. Navigate to function 43 on the op-panel.
  2. Press Enter to bring up the confirmation SRC.

    The display shows A1003043.

  3. Press Enter to start the dump.

    43 00 is displayed, so the dump has started.

Table 2. Function 43: Start a platform system dump for BMC
Function/Data Action or description 
4 3 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use <Increment>/<Decrement> buttons and scroll to function 43. 
A 1 0 0 3 0 4 3 _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press <Enter> to start the dump. 
4 3 _ _ _ _ 0 0 _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Platform system dump begins.

00=Accept, FF=Reject (May not be visible).