Moving the keyboard

Learn how to move the keyboard from the console unit.

To move the keyboard from the existing console unit to the replacement console unit, complete the following steps:

  1. Carefully lift the flat-panel display to the full upright position.
  2. Remove the keyboard-and-mouse cable from the keyboard tray, and then remove the keyboard from the console unit and set it aside.
  3. Place the replacement console unit on a table or other flat surface and make sure that the right side of the unit extends approximately 76 mm (3 in.) over the edge of the surface. This will help you route the keyboard-and-mouse cable more easily.
  4. Hold the keyboard near the keyboard tray and carefully route the keyboard-and-mouse cable down through the keyboard tray cutout and up through the cutout that is behind the flat-panel display. (See the illustration.) Carefully pull the cable through the cutouts.
    Routing the keyboard-and-mouse cable down through the keyboard tray cutout and up through the cutout that is behind the flat-panel display.
  5. Place the keyboard in the tray and exert a small amount of pressure on the keyboard to secure it to the double-sided tape on the front of the console tray.
  6. Close the flat-panel display.
    Attention:
    • When you route the keyboard-and-mouse cable, make sure that the cable does not hang below the underside of the keyboard where it might be damaged if it interferes with the devices in the rack space below the console unit.
    • Make sure that you route all cables through the cable-routing features on the console frame behind the display and along the cable-management arm.
  7. Close the flat-panel display.