Change Licensed Internal Code

Change the Licensed Internal Code of a managed BMC system by using your Hardware Management Console (HMC).

The system firmware is a combination of the BMC firmware and the PNOR firmware. You must update both the BMC firmware and the PNOR firmware for the system to operate properly. If you update only one type of firmware, but do not update the other type of firmware, system errors might occur.

To change the Licensed Internal Code, complete the following steps:

1. In the navigation area, click System resources, and then select Systems.
2. Select the server for which you want to view system information.
3. In the menu pod, expand Actions and then expand Updates.
4. Select Change Licensed Internal Code > BMC Change Licensed Internal Code.
5. Follow the onscreen instructions in the BMC Change Licensed Internal Code guided wizard.
   Note: The BMC system must be in the powered off state before you can proceed with the wizard.
6. When you complete this task, click Close.

Use the online Help if you need additional information about this task.