Installing a rack-based server

Use this information to learn about installing a rack-based server.

Prerequisite for installing the rack-mounted server
Use the information to understand the prerequisites that are required for installing the server.
Completing inventory for your server
Use this information to complete inventory for your server.
Determining the location and attaching the mounting hardware to the rack
You might need to determine where to install the system in the rack, and install the mounting hardware. Use this procedure to complete this task.
Removing the shipping cover from the rear of the system chassis
You must remove the shipping cover from the rear of the system chassis.
Installing the server using four people
Before you install the system into the rack, you must remove components from the chassis so that it's less heavy and easier to lift. Read this section if you will have four people to lift the system onto the rails and into the rack.
Installing the server using three people
Before you install the system into the rack, you must remove components from the chassis so that it's less heavy and easier to lift. Perform the tasks in this section if you will have three people to lift the system onto the rails and into the rack.
Installing the cable-management bracket
Install the cable management bracket to provide organization for the cables and cords connecting to the system.
Installing the system into the rack
Use the procedure in this section to install the system chassis into the rack.
Replacing components in the system chassis
Replace the components into the system chassis, now that it is installed onto the rails.
Cabling the server and connecting expansion units
Learn how to cable the server and to connect expansion units.
Completing the server setup
Learn about the tasks you must complete to set up your managed system.

Parent topic: Installing the IBM Power E1050 (9043-MRX)

Last updated: Tue, November 14, 2023