Setting up the work environment
To set up the work environment for an RTE, you specify what type of RTE is being configured, set RTE-specific values, and select the products to be configured in the environment. Then you submit the KCIJPCFG job, which uses the values you provide to allocate the work libraries, update the interim libraries, and create the configuration profiles for the RTE. You can select a model RTE to use to set up the new RTE, or configure it from scratch.
Procedure
-
Select Set up PARMGEN work environment for an RTE from the Workflow -
Primary Options Menu.
The first Set up PARMGEN work environment for an RTE panel is displayed.
KCIPQPG1 SET UP/REFRESH PARMGEN WORK ENVIRONMENT FOR AN RTE (1 OF 3) -------- Command ===> Quick Configuration Mode More: + Specify the RTE model profile to use: ==> ______________________________________________________ - To create a new RTE based on a predefined IBM model, type a ? in the field and press Enter, then select the appropriate template. - To create a new RTE that is a clone of an existing PARMGEN RTE, specify the WCONFIG profile library and RTE member name to clone; for example: (&hlq.&rte.WCONFIG(&clone_from)) - To create a new RTE that is a clone of an ICAT-created RTE, specify the ICAT RTE Batch member location and RTE member; for example: (&hlq.ICAT.INSTJOBS(SYSA)) - To create a new RTE from scratch, leave this field blank. - To reconfigure or upgrade this existing PARMGEN RTE, specify its values; for example: (TDITNT.IDTST.SYSA.WCONFIG(SYSA)) Customize jobcard data: ==> //TDITNT JOB (ACCT),'%SYSMEMBER% - NAME',CLASS=A,______________________ ==> // MSGCLASS=X,MSGLEVEL=(1,1),NOTIFY=&SYSUID.,REGION=0M__________________ ==> //** 0 0 RTE_NAME=%RTE_NAME% SYSMEMBER=%SYSMEMBER%_____________________ ==> //** \_~_/ SYSJOBNAME=%SYSJOBNAME% JOBPARM SYSAFF=%SYSNAME%______________ Specify the Install Job Generator (JOBGEN) output library if you want PARMGEN to reuse CALLLIBS parameters from the JOBGEN repository: ==> ____________________________________________ (Type ? for last referenced JOBGEN library discovered, if any.) -
Choose a method to create the RTE
- To use the IBM-provided model RTE configuration profile, enter a question mark (?) in the first field, then select @MDLHSB from the presented list of models and press Enter. The configuration software then populates the field with the fully-qualified name for the RTE.
- To create an RTE from scratch, leave the field blank.
-
As appropriate, specify the job card data.
- Jobcard data
- If a customized job card is already available, it is retrieved from the ISPF user profile pool. If it is not available and if you did not specify a JOBGEN output library, the job card is harvested from gbl_target_hilev.TKANSAM SMP/E target library where the initial PARMGEN sample job card default is supplied. If you specified a JOBGEN output library, the job card information is harvested from that location. You can modify the retrieved data as needed. The customized job card is saved in the ISPF user profile pool and persists across ISPF sessions. On this panel, specify the parameter values appropriate for your environment. In most cases, the PARMGEN configuration parameters on this panel are required.
-
Press Enter to proceed to the next panel.
The Set up PARMGEN Work Environment for an RTE (2 of 3) panel (KCIP@PG2) is displayed. The values on this panel are read from the profile library and runtime member name you specified on the preceding panel.
KCIP@PG2 SET UP/REFRESH PARMGEN WORK ENVIRONMENT FOR AN RTE (2 OF 3) --------- Command ===> Quick Configuration Mode GBL_USER_JCL: TDITN.IDTST.PARMGEN.JCL RTE_PLIB_HILEV: TDITN.IDTST RTE_NAME: DEMO Enter parameter values appropriate for your environment: UNIT / STORCLAS / VOLSER MGMTCLAS GBL_TARGET_HILEV: TDITNT.DEV.ITM63053________________ ________ / ________ / HLQ of SMP/E target (TK*) datasets ______ ________ GBL_SYSDA_UNIT: SYSDA___ Work datasets UNIT name GBL_REGION: 0M______ JCL REGION (specify K/M suffix) Note: Type BACK to go back one panel. Type UTIL to access utility menu. -
Review the values on the panel and override them as necessary.
- GBL_TARGET_HILEV
- Specifies the SMP/E high-level qualifier of the SMP/E target (TK*) libraries.
- GBL_SYSDA_UNIT
- Specifies the non-VSAM disk UNIT for global work data sets.
- GBL_REGION
- Specifies the JCL REGION value override if other than the REGION=0M value. This is the required storage value in Kilobytes or in Megabytes for PARMGEN batch jobs and product started tasks. The jobs contain the REGION= parameter on the EXEC statement. The syntax of the JCL REGION parameter is either &valueK or &valueM. Change this value as required by your installation. Specify K/M suffix (ex.: 4096K, 0M). The default is 0M.
-
Press Enter to proceed to the next panel.
The Set Up PARMGEN Work Environment for an RTE (3 OF 3) panel (KCIP@PG3) is displayed with pre-defined values according to the model you selected.Depending upon your screen resolution, you might have to scroll down (PF8) to see all the parameters. (Look for the More: + that indicates that there is additional content on the panel.)
KCIP@PG3 SET UP/REFRESH PARMGEN WORK ENVIRONMENT FOR AN RTE (3 OF 3) --------- Command ===> Scroll ===> PAGE Enter parameter values appropriate for the LPAR RTE=DEMO. Press F1=Help for more information. More: + RTE_DESCRIPTION: Sharing-w/-Base RTE w/ Hub TEMS/Agents__________ RTE_TYPE: SHARING_ (Full, Sharing) RTE_HILEV: TDITN.IDTST_____________________________ (ex.: TDITN.IDTST (&hlq portion of Non-VSAM RK* HLQ=&hlq.&rte_name) RTE_VSAM_HILEV: TDITN.IDTST_____________________________ (ex.: TDITN.IDTST (&hlq portion of VSAM RK* HLQ=&hlq.&rte_name) If any RTE dataset HLQ-related parameter values are NONSMS-managed: RTE_SMS_UNIT: ________ (Non-VSAM disk UNIT type) RTE_SMS_VOLUME: ________ (Non-VSAM disk VOLSER) RTE_SMS_MGMTCLAS: ________ (Non-VSAM disk MGMTCLAS) RTE_SMS_STORCLAS: ________ (Non-VSAM disk STORCLAS) RTE_SMS_VSAM_VOLUME: ________ (VSAM disk VOLSER) RTE_SMS_VSAM_MGMTCLAS: ________ (VSAM disk MGMTCLAS) RTE_SMS_VSAM_STORCLAS: ________ (VSAM disk STORCLAS) RTE_SMS_PDSE_FLAG: Y (Y, N) (Allocate Non-VSAM PDSE libraries) If RTE_TYPE is SHARING: RTE_X_HILEV_SHARING: TDITN.IDTST________________________ (ex.: TDITN.IDTST) (&hlq portion of shared RTE's HLQ=&hlq.&rte_share) RTE_SHARE: ___________________________________ ("SMP" value or *&rte_share) (*&rte_share portion of shared RTE's HLQ=&hlq.&rte_share) RTE_LOAD_SHARED_LIBS: Y (Y, N) (Is RTE updater of RO shared libs) If symbolics (system variables or user-defined variables) will be used: RTE_SYSV_SYSVAR_FLAG: N (Y, N) (System/User variables flag) Security settings: RTE_SECURITY_USER_LOGON: NONE____ (RACF, ACF2, TSS, NAM, None) RTE_SECURITY_FOLD_PASSWORD_FLAG: Y (Y, N) (Fold password to upper case) RTE_SECURITY_CLASS: &OMEGSAF._______________________________________ RTE_X_SECURITY_EXIT_LIB: TDITN.IDTST.CDLID.RKANSAMU______________________ GBL_DSN_ACF2_MACLIB: ________________________________________________ GBL_DSN_ACF2_MACLIB1: ________________________________________________ Local Tivoli Enterprise Monitoring Server (TEMS) settings in this LPAR RTE: RTE_TEMS_CONFIGURED_FLAG: Y (Y, N) (Configure TEMS in this RTE) RTE_TEMS_NAME_NODEID: &SYSNAME.:CMS______________________ (e.g.,DEMO:cms))))) KDS_TEMS_TYPE: HUB_____ (Hub, Remote) KDS_TEMS_HA_TYPE: __ (HA=High Availability Hub TEMS type) ITM components' communication-related and started tasks settings: RTE_TCP_PORT_NUM: &RTE_PORT.____________ (1-65535 port number) RTE_VTAM_APPLID_PREFIX: K&SYSCLONE.___________ (1-4 char.VTAM APPLID prefix) RTE_STC_PREFIX: IBM___________________ (1-4 char.started task prefix) Note: Type BACK to go back one panel. Type UTIL to access utility menu. -
Modify the values in the panel based on the RTE that you are creating.
- If your environment is not SMS-managed, specify the VSAM values.
- Provide values to parameters that are required by the RTE:
- If you are following the IBM-provided model, provide value for the following parameter:
- RTE_X_HILEV_SHARING
- If you are creating the RTE from scratch, provide values for the following parameters:
- RTE_TYPE=SHARING
- RTE_X_HILEV_SHARING=base_rte_hlq
- If you are following the IBM-provided model, provide value for the following parameter:
- You can change the following parameters to meet site-specific requirements:
- RTE_TEMS_NAME_NODEID
- RTE_TCP_PORT_NUM
- RTE_VTAM_APPLID_PREFIX
- RTE_STC_PREFIX
- RTE_X_SECURITY_EXIT_LIB
- RTE_SECURITY_CLASS
-
Press Enter to proceed to the next panel.
The Include (Configure) Product(s) in this LPAR RTE panel (KCIP@PGI) is displayed. All the products that are installed in the target libraries are listed and selected.
KCIP@PGI - INCLUDE (CONFIGURE) INSTALLED PRODUCT(S) IN THIS LPAR R Row 1 of 26 Command ===> Scroll ===> PAGE Select ("S" or "/") products to CONFIGURE those product(s) in DEMO RTE. Select or deselect products to include or exclude from configuration. Products configured in the model or current RTE (reconfiguring) are preselected When finished, change N to Y to confirm selections. Confirm ==> N (Y, N) Kpp Component or Product Name and Version ---- ---------------------------------------------------------------------- / KAH System Automation Monitoring Agent V350 / KC5 OMEGAMON for CICS V550 / KDO Tivoli Decision Support for z/OS Agent V181 / KDS Tivoli Enterprise Monitoring Server V630 / KD4 ITCAM for SOA Agent V711 / KD5 OMEGAMON for DB2 PE/PM V540 / KGW OMEGAMON for CICS TG V550 / KI5 OMEGAMON for IMS V550 / KJJ OMEGAMON for JVM V540 / KMQ OMEGAMON for Messaging - MQ V750 / KM5 OMEGAMON for z/OS V550 / KNA NetView for z/OS Agent V621 / KN3 OMEGAMON for Networks V550 / KOB OMEGAMON Enhanced 3270 User Interface V750 / KQI OMEGAMON for Messaging - Integration Bus V750 / KRG Advanced Audit for DFSMShsm Agent V260 / KRH Advanced Reporting and Management for DFSMShsm Agent V260 / KRJ Advanced Allocation Management Agent V330 / KRK Automated Tape Allocation Manager for z/OS Agent V330 / KRN Advanced Catalog Management Agent V260 / KRV Advanced Backup and Recovery for z/OS Agent V240 / KRW Tape Optimizer for z/OS Agent V220 / KS3 OMEGAMON for Storage V540 / KYN ITCAM for Application Diagnostics, TEMA V710.03 End of data -
Deselect any products that you do not want to include in the RTE, then change
Confirm ==> Nto Y, and press Enter.The JCL for the KCIJPCFG job is displayed. -
Review the JCL to understand what the job is doing, then submit the job.
The KCIJPCFG job submits a second job, KCIJPPRF. Wait until both jobs complete before proceeding to the next step.