KN3_TCP_ROUTE_TBL_FREQ
Use the KN3_TCP_ROUTE_TBL_FREQ parameter to specify how often the routing table information will be collected.
- Required or optional
- Optional
- Location where parameter value is stored
- In the KN3AGOPT member in the rhilev.midlev.rtename.RKANCMDU
library
- Parameter name
KN3FCCMD START ROUTE FREQ(&N3TCPRTF)(Routing table data frequency)Frequency (
FREQ) is defined as the number of collection intervals before the routing information will be collected.- Default value
- 10
- Permissible values
- A whole number between 1 and 99.
- Batch parameter name
- KN3_TCP_RTF
- PARMGEN name
- KN3_TCP_ROUTE_TBL_FREQ
- PARMGEN classification
- Agent parameters: TCP/IP Information
- Description
-
Routing table data frequency
This parameter determines how often the routing table information will be collected. Use this parameter to collect the data less often, which will reduce the overall CPU consumption while still making the data available. A value of 1 means that routing information will be collected every collection cycle. The global default value of 10 indicates that the data would be collected once every 10 collection cycles. The specification should be a whole number within the range of 1 through 99.
- Related parameters
-
- KN3_SNA_VTAM_COLLECT_DATA
- KN3_SNA_VTAM_SNAC_SNACINTV
- KN3_SNMP_CONFIG_FILE
- KN3_TCP_ALLHPR
- KN3_TCP_COLLECT_STACK
- KN3_TCP_CONN
- KN3_TCP_CSM
- KN3_TCP_EEHPR
- KN3_TCP_FTP_DSPINTV
- KN3_TCP_FTP
- KN3_TCP_GLBS
- KN3_TCP_INTE
- KN3_TCP_INTS
- KN3_TCP_IPSEC
- KN3_TCP_OSA
- KN3_TCP_ROUTE_TBL
- KN3_TCP_SAMPLE_INTERVAL
- KN3_TCP_TN3270
- KN3_TCP_TN3270_DSPINTV
- KN3_TCP_VIO_UNIT
- KN3_TCPXnn_OVRD_ROUTE_TBL_FREQ