FPEM - Online Monitor messages

FPEM0005W
Data not available. Monitor trace may not be active
FPEM001
<V1> command not valid in this panel. Valid commands are Db2, COLLECT, LOOK, REINIT, OPTIONS, and HISTORY
FPEM002
Unrecognized command. Valid commands for this panel are Db2, COLLECT, LOOK, REINIT, OPTIONS, and HISTORY
FPEM003
Jump selection <V1> is not valid. Enter a valid selection
FPEM004
Enter a valid selection
FPEM005
Data not available. Monitor trace may not be active
FPEM0060W
No history data found
FPEM0061W
Partial history data returned
FPEM0062E
Unable to allocate return area
FPEM0063W
Near-term history data is no longer available. Current data now being obtained
FPEM006
Enter 1 or 2
FPEM0070E
The server is not active
FPEM0071E
You have been disconnected from the server
FPEM0073E
You have not been connected to Db2 yet
FPEM007
The Online Monitor is not active
FPEM008
Enter 1 (Mod) or 2 (Old)
FPEM009
Select only one item from the list
FPEM011
An unusual condition has occurred in one of the Collect facility subtasks. Check Collect Messages for subtask <V1>
FPEM012
An unusual condition has occurred in the Periodic Exception subtask. Check the Periodic Exception Message Log
FPEM013
The Collect facility subtask <V1> has had an OP buffer overrun
FPEM014
An unusual condition has occurred in the exception notification subtask of the Collect facility
FPEM015
An error has occurred initializing the Collect facility subtask <V1>
FPEM016
<V1> command not valid in this panel. Valid commands are COLLECT, LOOK, REINIT, OPTIONS, and HISTORY
FPEM017
Unrecognized command. Valid commands for this panel are COLLECT, LOOK, REINIT, OPTIONS, AND HISTORY
FPEM018
Db2 command not allowed because it is already active
FPEM019
Subtask <V1> was not attached (RC <V2>). The application cannot continue.
FPEM020
This command is not available from this function
FPEM021
Maximum Db2 command functions exceeded
FPEM022
Internal error - Db2 command output table not created
FPEM024
Subsystem <V1> not available. RC <V2>, REASON <V3>
FPEM030
<V1> command not valid in this panel. Valid commands are Db2, REINIT, OPTIONS, HISTORY, and COLLECT
FPEM031
Unrecognized command. Valid commands for this panel are Db2, REINIT, OPTIONS, HISTORY, and COLLECT
FPEM032
LOOK command not allowed because it is already active
FPEM033
Invalid selection <V1>. Valid selections are 1 through 3
FPEM035
No periodic exception messages have been written
FPEM036
No periodic exceptions have occurred
FPEM037
Selected exception does not match current SSID <V1>
FPEM038
No display exceptions have occurred
FPEM039
Invalid selection <V1>. Valid selections are 1 through 6
FPEM040
Autodisplay activated. Refresh every <V1> <V2>. Press ATTN to terminate
FPEM041
Autodisplay. Refresh every <V1> <V2>. Press ATTN to terminate
FPEM042
Autodisplay terminated
FPEM043
Autodisplay interval must be numeric in the range 1 to 7200 seconds or 1 to 120 minutes
FPEM044
Autodisplay units must be SECONDS or MINUTES or any valid abbreviation
FPEM045
Extra parameters following AUTO command
FPEM046
Autodisplay interval must be numeric in the range 1 to 7200 seconds
FPEM047
Autodisplay interval must be numeric in the range 1 to 120 minutes
FPEM048
Autodisplay activated. Refresh every <V1> <V2>. History interval is <V3> seconds. Press ATTN to terminate
FPEM049
Autodisplay. Refresh every <V1> <V2>. History interval is <V3> seconds. Press ATTN to terminate
FPEM0500E
Subsystem <V1> is invalid. CAF RC <V2>, REASON <V3>
FPEM0501E
Db2 release is <V1>, Db2 loadlib (dsnload) release is <V2>
FPEM0502E
Db2 subsystem <V1> is not available. CAF RC <V2>, REASON <V3>
FPEM0503E
You are not authorized to access Db2 subsystem <V1>
FPEM0505E
You are not authorized to execute plan <V1>
FPEM0506E
Currently allocated Db2 version not supported by IBM® OMEGAMON for Db2 Performance Expert on z/OS®
FPEM0507E
Only one task in this ISPF logical session can be connected to Db2
FPEM051
<V1> command not valid in this panel. Valid commands are Db2, LOOK, COLLECT, OPTIONS, and HISTORY
FPEM0510I
No Db2 subsystem ID (SSID) has yet been specified. Select the Options function to specify a subsystem
FPEM0511E
Nonzero CAF return code. RC <V1>, REASON <V2>
FPEM0512W
SQL error <V1> received
FPEM0515W
Abends have stopped the monitor trace. Restart the trace
FPEM0516W
MONITOR1, MONITOR2, or SYSADM authority is needed to use Db2 IFI
FPEM0517E
IFCID <V1> is not valid/available on this Db2 subsystem
FPEM0518E
Nonzero IFI return code. RC <V1>, REASON <V2>
FPEM0519E
OMEGAMON for Db2 PE has been disconnected from Db2 prior to CAF call. RC <V1>, REASON <V2>
FPEM0522E
Invalid request passed to the Data Movement PC routine
FPEM0525E
Server User Manager task has terminated due to errors. Connection and Exception functions are not available
FPEM052
Unrecognized command. Valid commands for this panel are Db2, LOOK, COLLECT, OPTIONS, and HISTORY
FPEM053
<V1> command not valid in this panel. Valid commands are Db2, LOOK, COLLECT, OPTIONS, and HISTORY
FPEM054
Unrecognized command. Valid commands for this panel are Db2, LOOK, COLLECT, OPTIONS, and HISTORY
FPEM0548W
User Authorization exit returns no data
FPEM0549W
Severe error occurred in User Authorization exit
FPEM055
Command not valid in this panel. Valid command is Db2.
FPEM056
Unrecognized command. Valid command for this panel is Db2.
FPEM057
The Collect Report Data facility is not active
FPEM060
No history data found
FPEM061
Partial history data returned
FPEM0610W
Offset field must be numeric in the range of 0 to 11
FPEM0611W
Length field must be numeric in the range of 1 to 8
FPEM0612W
Length value required
FPEM0613W
Offset value required
FPEM0614W
Sum of offset and length cannot exceed 12 bytes
FPEM0615W
Connection type required
FPEM062
Unable to allocate return area
FPEM063
Mear-term history data is no longer available. Current data now being obtained
FPEM070
The server is not active
FPEM071
You have been disconnected from the server
FPEM072
DYNALLOC returned return code <V1>, reason code x'<V2>', SMS reason code <V3>
FPEM073
You have not been connected to Db2 yet
FPEM074
No data to display
FPEM075
Data set not cataloged
FPEM076
Specified volume or acceptable volume not mounted
FPEM077
DYNALLOC returned Return code <V1>, Reason code x'<V2>'
FPEM078
Data set already exists
FPEM079
Catalog Error: Data set name conflicts with existing data set name or user is not authorized to perform the operation
FPEM080
System abend occurred for <V1>. Abend code <V2>, reason code <V3>
FPEM0800I
Task started at <V1> for Db2 subsystem <V2>
FPEM0801I
Task stopped at <V1>
FPEM0802E
SQL return code –<V1> reading catalog info, trace stopped
FPEM0803E
Destination <V1> has become inactive
FPEM0804I
FPEM0804I Task stop trigger is: <V1>
FPEM0806W
FPEM0806W <V1> records are not written to <V2>. The maximum record length of one of these records is <V3>.
FPEM0807I
The OP buffer high water mark is <V1>.
FPEM081
I/O error occurred for <V1>. System information: <V2>
FPEM0811I
Task start trigger is: <V1>
FPEM0813I
Db2 traces to <V1> started at <V2>
FPEM0814I
Db2 traces to <V1> stopped at <V2>
FPEM0815I
<V1> records written to '<V2>'
FPEM0816E
Collect data set is full
FPEM0817E
No free OP buffers available at <V1>
FPEM0818E
An error occurred starting the Db2 traces above
FPEM0819I
Task description is: <V1>
FPEM082
Error occurred during DYNALLOC de-allocation of <V1>. Return code <V2>, reason code <V3>
FPEM0820I
<V1> buffer overflows occurred
FPEM0821I
<V1> records lost
FPEM0822E
Error allocating Collect data set. Reason code <V1>
FPEM0823E
Error opening Collect data set with return code <V1>
FPEM0824E
Error writing a record to the output data set with return code <V1>
FPEM0825E
Error allocating Collect data set. Record length <V1> of <V2> is inappropriate. Length should be at least 4092
FPEM083
<V1> is full. The data set has been closed. Some data may be lost. Abend code <V2>, reason code <V3>
FPEM0832W
GETMAIN FAILURE OF <V1> KB FOR READA BUFFER. RC <V2>
FPEM0834E
NO READA BUFFER FREED FOR REUSE. COLLECT REPORT DATA IS STOPPED
FPEM084
Space abend occurred while closing <V1>. Some data may be lost. Abend code <V2>, reason code <V3>
FPEM085
A record was not added to <V1> because it was too long. The data set is still open. Abend code <V2>, reason code <V3>
FPEM086
Error attempting to open data set
FPEM0860I
Compressing started at <V1>
FPEM0861I
Compressing stopped at <V1>
FPEM0862E
Error allocating data set for compressed data. Reason code <V1>
FPEM0865E
Error during data set compression. Reason code <V1>
FPEM0866I
STARTING TERSE <V1> <V2>
FPEM0867E
Compression will be not started. Reason code <V1>
FPEM087
Data set is already open
FPEM088
Space abend occurred while closing the Exception Log data set. Some data may be lost
FPEM089
Space abend occurred while closing the Exception File data set. Some data may be lost
FPEM090
Error occurred loading I/O module. Abend code <V1>, reason code <V2>
FPEM091
Insufficient storage available for I/O initialization
FPEM0914W
Error attempting to write to the exception log
FPEM0918W
Threshold field <V1> is in error. Event <V2> is invalid
FPEM0919W
Threshold field <V1> is in error. The field is not valid for environment <V2>
FPEM0920W
Threshold field <V1> is in error. The field name is invalid
FPEM0921W
Threshold field <V1> is in error. Field is invalid for Db2 <V2>
FPEM0922W
Threshold field <V1> is in error. Field is invalid for event <V2>
FPEM092
DUMMY is not acceptable for this data set
FPEM093
<V1>
FPEM0938W
Error attempting to write to the exception file
FPEM0939E
The Periodic Exception Processor has terminated and cannot be restarted. Exit from the Online Monitor before retrying
FPEM094
Data set organization (<V1>) of <V2> is inappropriate. Valid values: <V3>
FPEM0944I
Periodic Exception Processor started at <V1>
FPEM0945I
PERIODIC EXCEPTION PROCESSOR STOPPED AT <V1>
FPEM095
Record format (<V1>) of <V2> is inappropriate. Record format should be variable
FPEM096
Record length (<V1>) of <V2> is inappropriate. Length should be at least <V3>
FPEM097
Member name should not be specified when the data set is sequential
FPEM098
Member name should be specified when the data set is partitioned
FPEM099
Internal error occurred - code is <V1>
FPEM100
Unrecognized command. Valid commands for this panel are AUTO, REINIT, Db2, LOOK, COLLECT, HISTORY, OPTIONS, and PURGE
FPEM101
<V1> command not valid in this panel. Valid commands for this panel are AUTO, REINIT, Db2, LOOK, COLLECT, HISTORY, OPTIONS, and PURGE
FPEM102
The selected thread has terminated. Details are no longer available
FPEM104
No locks are currently held or suspended for this resource. If the thread you selected is no longer active, values for that thread remain available and will not be affected by refreshing this panel
FPEM105
The thread you selected no longer holds this resource. If the thread you selected is no longer active, values for that thread remain available and will not be affected by refreshing this panel
FPEM106
No threads were found matching the current qualify values
FPEM107
Insufficient storage to return locking data. IFI RC <V1>, REASON <V2>
FPEM108
Unrecognized command. Valid commands for this panel are SORT, QUALIFY, RESET, AUTO, REINIT, Db2, LOOK, COLLECT, HISTORY, OPTIONS, and PURGE
FPEM109
<V1> command not valid in this panel. Valid commands are SORT, QUALIFY, RESET, AUTO, REINIT, Db2, LOOK, COLLECT, HISTORY, OPTIONS, and PURGE
FPEM110
Field order must be numeric in the range 1 to 15
FPEM111
The same order has been specified for more than one field
FPEM112
Sort sequence must be specified as 1 (Ascending) or 2 (Descending)
FPEM113
Sort sequence must be specified as ASCENDING or DESCENDING or any valid abbreviation
FPEM114
Command contains an unrecognized field identifier. Valid values are PRIMAUTH, PLANNAME, COLLECTION, PROGRAM, CORRELATION, CONNECT, CONNTYPE, REQLOC, STATUS, REQUESTS, C1ELAPSED, C1CPU, C2ELAPSED, C2CPU, and C3ELAPSED. Valid abbreviations can be used
FPEM115
Command contains an invalid field identifier abbreviation. The shortest permitted truncations are PRI, PL, COL, PRO, COR, CONNE, CONNT, REQL, S, REQU, C1E, C1C, C2E, C2C, and C3
FPEM116
At least one order field must be specified. To use the default parameters, cancel this panel and deactivate the sort command if it is active
FPEM117
More than 32 KB of locking data exists. Only up to 32 KB of locking data can be returned. IFI RC <V1> REASON <V2>. See Db2 MSGS/CODES
FPEM118
The selected entry does not represent a thread
FPEM120
The QUALIFY command accepts one optional parameter, which can be on or off or any valid abbreviation
FPEM121
Invalid character. Must be alphabetic
FPEM122
At least one Thread Status must be specified
FPEM123
At least one Thread Type must be specified
FPEM130
An SQL error has occurred. SQL CODE <V1>. As a result, some DBID/OBID translations may not have been performed
FPEM131
Unrecognized command. Valid commands for this panel are AUTO, REINIT, Db2, LOOK, COLLECT, HISTORY, OPTIONS, EXPLAIN, and PURGE
FPEM132
<V1> command not valid in this panel. Valid commands are AUTO, REINIT, Db2, LOOK, COLLECT, HISTORY, OPTIONS, EXPLAIN, and PURGE
FPEM133
<V1> command not valid for this release of Db2
FPEM134
No return area from Db2 to indicate the outcome of the command entered. IFI RC <V1>, REASON <V2>. See Db2 MSGS/CODES
FPEM135
A thread has to be selected for the <V1> command
FPEM136
No thread has been created for this agent, so cannot be purged
FPEM138
An SQL error has occurred. SQL CODE -805. The packages FPEVDB2S, DGOVDB2S, DGOVSDBO, and DGOVSDOB must be rebound.
FPEM140
Reset successful. Sort and qualify are now off
FPEM141
Reset successful. Sort and qualify are now off. Extra parameters have been ignored
FPEM142
No history data found. Selected thread has terminated
FPEM200
Invalid command. Valid commands are AUTO, Db2, DELTA, HISTORY, INTERVAL, LOOK, COLLECT, OPTIONS, REINIT, and RESET
FPEM2006E
The product installation is incomplete
FPEM202
One or more fields have not been formatted for display due to an internal error. Fields marked with ? are the fields not formatted - other fields have been formatted correctly
FPEM203
Statistics interval processing started
FPEM204
Statistics interval processing stopped by RESET command
FPEM205
Statistics delta processing started
FPEM206
Statistics delta processing stopped by RESET command
FPEM207
Insufficient storage available for Statistics processing
FPEM208
RESET command ignored - interval or delta not active
FPEM209
Statistics Internal Error while formatting buffer pools
FPEM210
Insufficient storage available for delta processing
FPEM211
Insufficient storage available for interval processing
FPEM212
Unrecognized command. Commands valid for statistics are AUTO, Db2, DELTA, HISTORY, INTERVAL, LOOK, COLLECT, OPTIONS, REINIT, and RESET
FPEM213
Autodisplay activated. Refresh every <V1> <V2>. Press ATTN to terminate
FPEM214
Autodisplay. Refresh every <V1> <V2>. Press ATTN to terminate
FPEM215
Statistics interval processing started. Extra parameters ignored
FPEM216
Statistics interval processing stopped by RESET command. Extra parameters ignored
FPEM217
Statistics delta processing started. Extra parameters ignored
FPEM218
Statistics delta processing stopped by RESET command. Extra parameters ignored
FPEM219
Db2 restart detected. Autodisplay terminated
FPEM220
Db2 restart detected. Autodisplay and delta processing terminated
FPEM221
Db2 restart detected. Delta processing terminated
FPEM222
Db2 restart detected. Autodisplay and interval processing terminated
FPEM223
Db2 restart detected. Interval processing terminated
FPEM229
Not all data displayed. Limited support for: <V1>.
FPEM250
Invalid date. Required format is: <V1>
FPEM251
Invalid time. Required format is: HH:MM:SS
FPEM252
History Date/Time is in the future
FPEM253
History is not active
FPEM254
History time is invalid. Required format is: HH:MM:SS
FPEM255
History date is invalid. Required format is: <V1>
FPEM256
Syntax error in HISTORY command. Valid formats are: HISTORY, HISTORY BACK, HISTORY FORWARD, HISTORY OFF, HISTORY <V1> HH:MM:SS, HISTORY <V2>, and HISTORY HH:MM:SS
FPEM257
Error in HISTORY command. Date/Time entered is in the future
FPEM301
Group buffer pool <V1> has been deleted
FPEM302
DPMOUT record has not formatted successfully
FPEM303
ISPF variables have not formatted successfully
FPEM304
Insufficient storage available for DPMOUT record formatting
FPEM307
System Parameters internal error <V1>
FPEM308
Insufficient storage during System Parameters initialization
FPEM309
Buffer pool <V1> has been deleted
FPEM404
Monitor write function disabled
FPEM405
Monitor write function enabled
FPEM411
Enter valid subsystem ID
FPEM412
Enter valid data set name
FPEM413
Enter 1 or 2
FPEM414
Enter a valid Plan Name
FPEM415
Select only one server from the list
FPEM416
Enter 1, 2, or 3
FPEM420
Memory size must be numeric in the range 1 to 4 (in MB)
FPEM500
Subsystem <V1> is invalid. CAF RC <V2>, REASON <V3>
FPEM501
Db2 release is <V1>, Db2 loadlib (dsnload) release is <V2>
FPEM502
Db2 subsystem <V1> is not available. CAF RC <V2>, REASON <V3>
FPEM503
You are not authorized to access Db2 subsystem <V1>
FPEM504
The server subsystem <V1> is not present. OMEGAMON for Db2 PE may not be installed correctly
FPEM505
You are not authorized to execute plan <V1>
FPEM506
Currently allocated Db2 version not supported by OMEGAMON for Db2 PE
FPEM507
Only one task in this ISPF logical session can be connected to Db2
FPEM508
Db2 subsystem <V1> is stopping, please end your session
FPEM509
Db2 subsystem <V1> is abnormally terminating, please end your session
FPEM510
No Db2 subsystem ID (SSID) has been specified. Select the Options function to specify a subsystem
FPEM511
Nonzero CAF return code. RC <V1>, REASON <V2>
FPEM512
SQL error <V1> received
FPEM513
Internal error <V1> while adding a message to the DB2I queue
FPEM514
You cannot change the Db2 subsystem while trace is active
FPEM515
Abends have stopped the monitor trace. Restart the trace
FPEM516
MONITOR1, MONITOR2, or SYSADM authority is needed to use Db2 IFI
FPEM517
IFCID <V1> is not valid/available on this Db2 subsystem
FPEM518
Nonzero IFI return code. RC <V1>, REASON <V2>
FPEM519
The connection to Db2 was lost prior to CAF call. RC <V1>, REASON <V2>
FPEM520
UDA allocation failed. Connection to server failed. Connection will be made to Db2
FPEM521
SRB allocation failed. Connection to server failed. Connection will be made to Db2
FPEM522
Invalid request passed to the Data Movement PC routine
FPEM524
No connect or disconnect routine available
FPEM525
Server User Manager task has terminated due to errors. Connection and Exception functions are not available
FPEM526
Server internal error. CODE <V1>, REASON <V2>
FPEM527
Server DIV internal error. CODE <V1>
FPEM528
Server HISTORY internal error. CODE <V1>
FPEM529
TCB token storage could not be allocated. Connection to server failed. Connection will be made to Db2
FPEM530
UDA allocation failed
FPEM531
SRB allocation failed
FPEM532
You are not authorized to connect to the server
FPEM533
SQL reason code of <V1> was received
FPEM534
Invalid request passed to the Data Movement PC routine
FPEM535
You are not authorized to connect to the selected maintenance server
FPEM536
You are not authorized to connect to the server, possibly because the Monitor Trace is not active
FPEM538
TCB token storage could not be allocated
FPEM539
Unknown return code set by the server
FPEM540
Subsystem internal error. SSI return code <V1>
FPEM541
Subsystem internal error. SSI was able to pass the request to the subsystem but received SSOB return code <V1>
FPEM542
Subsystem internal error due to server not of matching type to swap subsystems
FPEM543
Subsystem internal error due to <V1> not attached to any server
FPEM544
Subsystem internal error. Unknown return code <V1>
FPEM545
Error during Disconnect from server PC routine. Return code <V1>
FPEM547
Nonzero IFI return code. RC 4, REASON 00E60802. The IFCID return area is not large enough to accommodate all records from READS
FPEM550
Function <V1> is not supported for subsystem <V2> Db2 <V3>.
FPEM600
The collect subtask "<V1>" has terminated
FPEM601
The exception processor subtask has terminated
FPEM602
The collect exception notification subtask has terminated
FPEM650
Insufficient storage
FPEM651
Diagnosis requires elapsed times for Db2 suspensions. These are not present or zero. Accounting or Monitor classes 2 and 3 may not be active or the thread may not have experienced suspensions
FPEM652
The thread must have performed some buffer activity before it can be diagnosed
FPEM654
Unrecognized command. Valid commands for this panel are REINIT, Db2, LOOK, EXPLAIN, COLLECT, and OPTIONS
FPEM655
No command allowed for this panel
FPEM680
Please wait. Invoking Explain ...
FPEM681
Valid selection characters are: <V1>
FPEM682
Valid choices are: 1 for yes, 2 for no
FPEM683
Only valid optional parameter for Explain is 'OPTIONS'
FPEM684
Only 1 SQL statement can be selected for Explain
FPEM685
Range commands incomplete or conflicting
FPEM686
No explainable SQL statements found in source code
FPEM687
No SQL statements eligible for Explain found in source
FPEM688
SQL statement found that is greater than the maximum size
FPEM691
Only valid command is 'OPTIONS'
FPEM692
Error <V1> during ISPF table initialization
FPEM693
Error <V1> during ISPF panel processing
FPEM694
SQL text not loaded. Problem reading text from ISPF table
FPEM700
Command <V1> is not valid here. Valid commands are Db2, LOOK, COLLECT, REINIT, OPTIONS, and HISTORY
FPEM701
Command <V1> is not recognized. Valid commands are Db2, LOOK, COLLECT, REINIT, OPTIONS, and HISTORY
FPEM702
Error connecting to <V1>. SQL CODE <V2>
FPEM703
Error resetting connection to <V1>. SQL CODE <V2>
FPEM704
Error setting current SQLID. SQL CODE <V1>
FPEM705
Error setting current degree. SQL CODE <V1>
FPEM706
Unexpected SQL error. SQL CODE <V1>
FPEM707
Error locating current degree value for DBRM/package. SQL CODE <V1>. Current degree setting will default to 1
FPEM708
Error setting Current Degree. SQL CODE <V1>. Processing to continue
FPEM710
Enter a selection from 1 to 4
FPEM711
There are no matching rows in table <V1>
FPEM712
The table <V1> could not be accessed
FPEM713
Select just one row from the list of plan table entries
FPEM714
The query number must be numeric or blank
FPEM715
Select just one package from the list
FPEM716
Select just one statement from the list
FPEM717
There are no matching packages
FPEM718
No SQL statements were found for this package
FPEM719
The plan table owner must be a valid name. Wildcard characters are not accepted
FPEM720
Select just one DBRM from the list
FPEM721
Select just one statement from the list
FPEM722
There are no matching DBRMs
FPEM723
No SQL statements were found for this DBRM
FPEM730
The SQL statement text has not changed. The statement will not be explained
FPEM731
The temporary data set <V1> is in use
FPEM732
A severe error occurred while editing data set <V1>
FPEM733
The SQL statement text is too long. The text has been truncated
FPEM740
There are remote packages in this plan. The count of SQL statements does not include the statements from the remote packages
FPEM741
Select just one table partition from the list
FPEM742
No partition information was found for this table space
FPEM743
Select just one index from the list
FPEM744
No index information was found for this table
FPEM745
Select just one index partition from the list
FPEM746
No partition information was found for this indexspace
FPEM747
Select just one column from the list
FPEM748
No key column information was found for this column
FPEM750
There is no key column distribution information available
FPEM751
The table <V1> could not be accessed
FPEM752
This statement has no host variables
FPEM753
Output truncated
FPEM754
There is no column group distribution information available
FPEM760
The SQL statement is not recognized or cannot be explained. Only SELECT, INSERT, UPDATE, and DELETE statements can be explained
FPEM761
An existing PLAN_TABLE entry for this statement was not found. The statement has been dynamically explained
FPEM762
This statement was explained at bind time
FPEM763
This statement was dynamically explained
FPEM764
Your plan table is no longer valid. Exit and reenter Explain to re-create the PLAN_TABLE
FPEM770
Your PLAN_TABLE has been successfully altered to Db2 <V1> format
FPEM771
A Db2 <V1> PLAN_TABLE has been created
FPEM772
Your PLAN_TABLE is invalid. Dynamic explains will not be performed
FPEM773
Enter a valid database and table space name. Leave blank to use default names
FPEM774
The database or table space does not exist
FPEM775
<V1> not authorized to access <V2>.plan_table
FPEM776
<V1> not authorized to create table in <V2>
FPEM777
<V1> not authorized to access <V2>.PLAN_TABLE. Statement dynamically explained
FPEM780
Subsystem <V1> is invalid. CAF RC <V2>, REASON <V3>
FPEM781
Db2 subsystem <V1> is not available. CAF RC <V2>, REASON <V3>
FPEM782
You are not authorized to access Db2 subsystem <V1>
FPEM783
You are not authorized to execute plan <V1>
FPEM784
Only one task in this ISPF logical session can be connected to Db2
FPEM785
Db2 PE has been disconnected from Db2 prior to CAF call. RC <V1>, REASON <V2>
FPEM786
Db2 release is not compatible with the Db2 loadlib (dsnload) release
FPEM787
Nonzero CAF return code. RC <V1>, REASON <V2>
FPEM790
An unexpected error has occurred in module <V1>. The error code is <V2>
FPEM791
An ISPF <V1> service in module <V2> has returned code <V3>
FPEM792
Storage allocation failed for the Explain module
FPEM793
The explain connection to Db2 subsystem <V1> failed. CAF return code <V2>, reason code <V3>
FPEM794
No entry found for <V1>.<V2> in SYSIBM.SYSTABLES catalog
FPEM800
Please wait. Invoking Collect Report Data ...
FPEM802
The DB2T storage area has not yet been allocated by the Collect subtask "<V1>"
FPEM803
Destination <V1> has become inactive
FPEM804
Enter 1 (select), 2 (repeat), 3 (delete), or 4 (insert)
FPEM806
Collect Facility failed to save the user selections ISPF profile table. ISPF service <V1> returned code <V2> with message <V3>
FPEM809
Collect Report Data stopped because of an error and cannot be restarted. Exit the application, then restart.
FPEM810
Trace destination <V1> is unavailable to you. RC <V2>, REASON <V3>. Either this OP destination is owned by another task, or you do not have the appropriate Monitor Class Authority
FPEM811
You cannot leave Collect Report Data while trace is active
FPEM812
The DB2T storage area for Stop Trace commands has not yet been allocated by the Collect subtask "<V1>"
FPEM820
Command <V1> is not recognized. Valid commands are Db2, LOOK, REINIT, OPTIONS, and HISTORY
FPEM822
Valid selections are 1, 2, 3, and 4
FPEM823
Valid selections are 1, 2, and 3
FPEM824
Enter a Task Description
FPEM825
Select at least one report set
FPEM826
Generics are not allowed
FPEM827
The cursor must be on the 'For ifcid ...' field to use the PROMPT command
FPEM828
Enter a valid data set name
FPEM829
Enter the time in 24-hour clock notation
FPEM831
The cursor must be on either the 'Field...' or 'For ifcid...' field to use the PROMPT command
FPEM832
Enter a field name
FPEM833
Select at least one starting exception event
FPEM834
Select at least one of the stop conditions 'Elapsed time' or 'Number of records collected' to ensure the Collect task will stop
FPEM835
A valid IFCID is required when 'Number of IFCIDs collected' is selected
FPEM836
Command <V1> is not recognized. Valid commands are END and CANCEL
FPEM837
Valid selections are 1 and 2
FPEM840
Collect Report Data is already active on this screen
FPEM841
Collect task '<V1>' must be configured before the status and messages can be displayed
FPEM842
Collect task '<V1>' has terminated, so cannot be restarted
FPEM843
Collect task '<V1>' is in error, so cannot be restarted
FPEM844
Collect task '<V1>' must be configured before it can be started
FPEM845
Collect task '<V1>' has already been started
FPEM846
Collect task '<V1>' has not yet been configured
FPEM847
Collect task '<V1>' must be started before it can be stopped
FPEM848
Collect task '<V1>' must be stopped before it can be reconfigured
FPEM850
Select at least one Report Class
FPEM851
Select at least one IFCID
FPEM852
Enter at least one identifier in this panel
FPEM853
Only one set of Db2 qualifiers may have more than one qualifying value entered
FPEM854
Elapsed time is invalid
FPEM855
Number of records is invalid
FPEM856
Number of IFCIDs collected is invalid
FPEM857
IFCID number is invalid
FPEM858
<V1> command not valid in this panel. Valid commands are Db2, LOOK, REINIT, OPTIONS, and HISTORY
FPEM859
You will not receive information about asynchronous I/Os
FPEM860
Select one item only
FPEM861
The IFCID value '<V1>' is invalid - use the PROMPT command for a list
FPEM862
The IFCID value '<V1>' is not available. It has been excluded in Collect Configuration
FPEM863
Select one report set
FPEM864
Select one report class
FPEM865
Select one IFCID
FPEM866
This is the only IFCID available. Others were excluded in Collect Configuration
FPEM867
The field identifier '<V1>' is invalid - use the PROMPT command for a list
FPEM868
No messages have been written for the Collect subtask '<V1>'
FPEM869
The message list has not been created for the Collect subtask '<V1>'
FPEM870
Interval time must be in range of 1 through 1440 minutes
FPEM871
Active time must be in range of 1 through 3600 seconds
FPEM872
File format must be 1, 2 or 3
FPEM873
Size of OP buffer must be between 8 KB and 1024 KB
FPEM874
<V1> command not valid in this panel. Valid commands are END and CANCEL
FPEM880
Buffer size incorrect
FPEM881
The data type is incorrect, use 1, 2, or 3
FPEM882
The start type is incorrect, use 1 or 2
FPEM884
Interval time must be between 0 and 1440 minutes
FPEM885
Active time must be between 0 and 3600 seconds
FPEM886
Interval time is less than active time
FPEM900
Changes have been accepted
FPEM901
<V1> command not valid in this panel. Valid commands are Db2, LOOK, COLLECT, OPTIONS, and HISTORY
FPEM902
Unrecognized command. Valid commands for this panel are Db2, LOOK, COLLECT, OPTIONS, and HISTORY
FPEM903
Exception log data set names must be different
FPEM904
Exception file data set names must be different
FPEM905
Display exceptions found. <V1> total <V2> problem
FPEM907
Periodic interval must be numeric in the range 1 to 7200 seconds
FPEM908
Periodic interval must be numeric in the range 1 to 120 minutes
FPEM909
The Exception Processor has terminated normally
FPEM910
<V1> periodic warning exceptions found
FPEM911
Display exceptions found. <V1> total, <V2> problem
FPEM912
Error attempting to close the Exception log
FPEM913
Error attempting to close the Exception File
FPEM914
Error attempting to write to the Exception log
FPEM915
Invalid data set name
FPEM917
Unable to open vlist <V1>. RC <V2>
FPEM918
Event name <V1> is invalid
FPEM919
Field name <V1> is supported only by Db2 PE batch
FPEM920
Field name <V1> is invalid for Db2 PE or Db2
FPEM921
Field name <V1> is invalid for Db2 <V2>
FPEM922
Field name <V1> invalid for this event
FPEM923
Field value <V1> is not numeric
FPEM924
Comparison operator <V1> is invalid
FPEM925
Field name <V1> cannot be qualified
FPEM926
Field qualifier <V1> is invalid
FPEM927
<V1> is an invalid time value
FPEM928
A time value is not valid for field <V1>
FPEM929
Exception Processor initialized with errors
FPEM930
Exception Processor has been initialized
FPEM931
Comparison basis <V1> is invalid
FPEM932
Both problem value and warning value are blank
FPEM933
Invalid compare basis for a package field
FPEM934
Per occur compare basis is valid for batch only
FPEM935
No valid threshold records
FPEM936
Exception event notification started
FPEM937
Exception event notification stopped
FPEM938
Error attempting to write to the Exception file
FPEM939
The Periodic Exception Processor has terminated and cannot be restarted. Exit from the Online Monitor before restarting
FPEM940
The Periodic Exception Processor has terminated
FPEM941
Environment <V1> is invalid
FPEM942
Internal error building exception tables
FPEM943
The exception threshold data set is empty
FPEM944
Periodic Exception Processor started at <V1>
FPEM945
Periodic Exception Processor stopped at <V1>
FPEM946
Threshold data set from previous release is used
FPEM947
REINIT command not executed, Exception Processor not active
FPEM948
<V1> display problems. <V2> periodic problems
FPEM949
The Threshold data set contains records only valid for Batch
FPEM950
<V1> periodic warning exceptions found
FPEM951
Exception event details are not supported
FPEM952
REINIT command not allowed until previous command is completed
FPEM953
Exception Event processor started at <V1>
FPEM954
Exception Event processor stopped at <V1>
FPEM955
Log or File error occurred. Check Periodic Message List
FPEM956
Authorization failure details not found
FPEM957
No exception events have occurred
FPEM958
No authorization failures have occurred
FPEM959
Exception event details not found
FPEM995
One or more online application subtasks could not be attached
FPEM996
No data returned, so unable to process the request
FPEM997
The program is already active for this logical screen
FPEM998
The application cannot continue because Db2 interface module <V1> cannot be loaded
FPEM999
The application cannot continue because of insufficient storage

Parent topic: Messages