List of APARs resolved for drivers
Use this information to understand the APARs that have been resolved in Drivers 20.
| APAR | Decription |
|---|---|
| IV83598 | Unable to Import T4000 golden config using file based |
| IV83538 | NCM config modelling problem on Cisco 29xx |
| IV82977 | UPDATED VERSION SCRIPTS REQUIRED FOR JUNIPER / CISCO SMARTMODEL |
| IV82801 | Device support for Cisco C6400 NRP in TNCM |
| IV82934 | Import failed for ME-3600 Device |
| IV82865 | Riverbed Driver returning Array out of bounds |
| IV79869 | IDT synchronization Disconnect Action fails when ssh |
| IV81986 | Nexus 6x Commands not modeled 100% |
| IV81355 | CISCO ASR 901 UNMODELLED COMMANDS |
| IV81471 | Cisco|Router|1921|*15.4* - XML conversion is not 100% |
| IV81856 | CISCO C2960X-UNIVERSALK9-M-15.2(2)E3 CONVERSION ISSUE |
| IV81104 | customer is trying to import a Cisco C2960 device |
| IV78826 | MTAS native config diff too slow |
| IV80977 | Cached authentication not working. |
| IV80391 | Discovery of tellabs devices fails |
| IV81048 | VTMOS Cisco|Switch|3850|3.x - Could not convert CLI |
| IV80826 | ASR 901 driver Command conversion errors |
| IV79361 | Device smartmodel problem on Cisco switch 3750 |
| IV79672 | Some interfaces types and other commads not modelled |
| IV78998 | Autodiscovery 2 ssh ports |
| IV78752 | ITNCM641- Cfg import fail "Divide error" |
| IV75365 | CISCO NEXUS 7000 NX-OS VERSION 5 COMMAND ISSUES. |
| IV77496 | OLT aggregated CommandSets not generating config |
| IV78621 | Device smartmodel problem on Cisco switch 3750 |
| IV78170 | ALCATEL DSLAM 7330 4.3.10D MODELING |
| IV77574 | After upgrading to FixPack3 unable to use up arrow |
| IV76960 | Inline commands for native command sets |
| IV74703 | Native Command Set Failure |
| IV77050 | 76xx unmodeled commands |
| IV77091 | Firewall error |
| IV75210 | Unable to sync config of Juniper SRX |
| IV76761 | Alcatel SR 7750 OS V11. Rejected Commands during |
| IV76335 | Cisco IOS XE devices Config Sync Error - Could not convert to CLI to XML |
| IV76330 | ALU OLT driver update for VOIP xml v20 |
| IV75986 | ALCATEL SR 7750 REJECTED CMMANDS DURING IMPORT |
| IV75514 | Cisco|Switch|N5K - XML conversion rate is not 100% |
| IV75733 | Cisco|Router|2951|*15.4* - XML conversion is not 100% |
| IV73759 | TNCM Discovery of FirewallIV70965Sync operation not saving Actual OS to database |
| IV75285 | AVAYA_SWITCH_56XX_6.X CONVERSION RATE IS 98.67% |
| IV73539 | see pmr:73943,999,616 (IDT CONFIGURE ISSUE) |
| IV70474 | Cisco|Router|C3900e-UNIVERSALK9-M|C3900e-UNIVERSALK9- |
| IV75190 | Discovery of Extreme switches |
| IV75037 | Looking for ITNcM driver for Cisco 3650 switch IOS XE |
| IV74550 | CISCO|ROUTER|1921|*15.4* - XML CONVERSION IS NOT 100% |
| IV74452 | Firewall error |
| IV74434 | MRV-906G xml v4_3_2C conversion rate not 100% |
| IV74032 | Device Config Synch failed on selective device in |
| IV74163 | ITNCM Autodiscovery cannot discover 4-digit Juniper |
| IV74410 | zuochao5729:netcool:config manager presales case |
| IV74216 | TWO REMAINING UNMODELED COMMANDS FOR AVAYA_SWITCH_48XX_5.X |
| IV74059 | Cisco|Router|3945-CHASSIS|C3900e-UNIVERSALK9-M-15.4(3)M2 :Not 100% modeled. |
| IV73964 | Alcatel OLT OutboundURIsuffix tag issue |
| IV72535 | OS Manager VTMOS filter is case sensitive |
| IV71822 | Fortinet drivers UPdate |
| IV73360 | UOW cannot be executed. |
| IV73454 | Cisco|Router|SWR2008|1.3.7.18- modeling issue |
| IV73456 | Cisco|Router |CISCO1921/K9 | C1900-UNIVERSALK9-M-15.2IV73532avaya switch 48xx 5.x conversion rate is 75% |
| IV73533 | MRV-906G xml conversion rate not 100%. |
| IV73354 | Cisco|Router|C892FSP-K9|C800-UNIVERSALK9-M-15.4(3)M1 |
| IV72865 | Cisco|Router|SAP3702I-A-K9|AP3G2-K9W7-M-15.3(3)JAB |
| IV72731 | Cisco|Router|C892FSP-K9|C800-UNIVERSALK9-M-15.4(3)M1 |
| IV72728 | Cisco|Router|SRW2048|1.3.7.18 : Configuration not |
| IV72876 | MRV-906G xml conversion rate not 100% |
| IV72726 | alcatel router 7750-xx 11.x conversion rate is 77.96% |
| IV72795 | Unable to do OS upgradeIV70471Cisco|Router|CISCO2951/K9|C2951-UNIVERSALK9-M-15.4(3) |
| IV72475 | TNCM Auto Discovery Issue |
| IV72247 | Cisco 7206 device not modelling properly |
| IV71897 | Firewall error |
| IV71060 | Cisco ASR 9001 BGP Modelling errors |
| IV71183 | TCK-658 ITNCM doesn't model properly the subtree |
| IV71826 | Cisco ASR 903 configuration modelling errors |
| IV71742 | TCK-000 SSets don't show the information required |
| IV71502 | CUSTOMER WOULD LIKE A DRIVER FOR CISCO SWITCH NEXUS 7K 6.* |
| IV71453 | JUNIPER M320 DIFF OF MODELED CONFIG FAILED ON 6.4.1.1 |
| IV71765 | alu7342_add_LANXVLAN commandset issue |
| IV70865 | Extreme|X460-48t|15.3.2.11 modelling issue |
| IV70818 | Driver update for Juniper MX480 V14.x |
| IV70866 | SR 775 device modelling error |
| IV71093 | Order of the used protocol affects the devices |
| IV70579 | Cisco|SRW2008-K9|1.4.0.88 modeling rate and Import |
| IV70677 | ASA Getting Error when trying to use the config sync |
| IV70386 | Cisco|Router|C892FSP-K9|C800-UNIVERSALK9-M-15.4(3)M1 |
| IV70137 | Uows remain in "Executing " or "Waiting" status |
| IV70397 | ITNCM 6.4.0.3 : MRV 940 431 SSH ISSUE |
| IV66095 | scp transfer resource can not get devices images from |
| IV69822 | ALU 7342 *48.* Change VOIP command set issue |
| IV68921 | ITNCM can not import network devices from ITNM |
| IV69283 | CISCO_ROUTER_8XX_15.X XML CONVERSION ISSUE |
| IV69401 | C2951-UNIVERSALK9-M-15.4(3)M1 xml coversion issue |
| IV68164 | ALCATEL OLT IMPORT FAILURE WITH COULD NOT CONVERT TO XML (NULL) |
| IV67218/ IV68012 | Config not modelled completely on Cisco 2960 switches |
| IV67029 | Conversion in Native Commands doesn't work properly |
| IV63770/ IV65953 | Unable to push version config to Netscreen |
| IV67037 | Cisco ASR 9922 modelling error |
| IV59988 | PON - Auto IDT issue in 6.4.0.2 |
| IV66656 | ALU 7750 V11 Driver - Xml Conversion Rate issue |
| IV66659 | PTX5000- XML CONVERSION RATE ISSUE. |
| IV64033 | H3C reload script, optional "Continue?" prompt |
| IV66274 | CE- Provisioining - ALU OLT VLAN commandsets issue |
| IV65575 | Cisco Nexus Switch 1010 TNCM Device Support |
| IV45173 | H3C RAD Issue - Native Command Set Encoding |
| IV65158 | driver availability to support the Cisco 4948E device |
| IV63326 | ALU OLT VLAN commandsets issue |
| IV54941 | Cisco ASR9K Import failure in PROD |
| IV63528 | IDT ssh connection issues |
| IV63091 | The import of configuration of some Tellabs 8630 fails |
| IV63053 | Some UOWs fail on import part |
| IV58742 | ASR 900/1000 new driver 18 support |
| IV62513 | Autodiscovery fails to discover Cisco Nexus 7K |
| IV62822 | Cisco IOS switch - dot1x host-mode multi-host not modelled |
| IV62365 | Avaya Switch 8* - Binary Config not working. |
| IV61968 | Unable to import for the Switch model EN4093R |
| IV61047 | TCK-000 interface loopback|no ipv4 address |
| IV61579 | TCK-000 IOX4.0 doesn't work properly "ipv4 accest-list" |
| IV61134 | Cannot conver to XML for Cisco ACE Load Balancers |
| IV61259 | ALU OLT - VOIP command set issue |
| IV60943 | UNMODELED COMMAND FOR CISCO_ROUTER_ISRG2_15.X |
| IV60165 | CISCO/SWITCH/C4500X/IOS-XE 3.05 - C4500X DEVICE HAS UNMODELLED COMMANDS |
| IV60124 | problem creating Nexus encrypt config password |
| IV60241 | Compliance - Cisco NexusIV60242Compliance - Cisco Nexus - various storm control |
| IV59399 | TCK-000 Cluster-id not modeled properly |
| IV60082 | TCK-000 IOX 4.0 subtree snmp-server|enable not modeled properly |
| IV59528 | JUNIPER 1440 INTERFACE CONFIG IS NOT MODELLED 100% |
| IV56897 | unable to import initial configuraiotn for a Cisco |
| IV56611 | Model for Cisco ASR 903 contains multiple errors |
| IV55750 | Unable to import initial configuration from Cisco ASR |
| IV53689 | ITNM DRIVER IGNORES AUTHENTICATION DETAILS SUPPLIED IN THE ITNM DEVICE RAD |
| IV54860 | ITNM-ITNCM INTEGRATION DRIVER RAD HAS WRONG SCRIPT NAME AT COMMAND LINE / SCRIPT |
| IV55372 | Reopen PMR 53048 - Chassies devices are not filtered |
| IV56218 | import with java problem |
| IV52398 | Unable to connect via IDT to any F5 vs 10 or 11 |
| IV54706 | Cisco 7200 and 7300 - ISIS related configs are not modelled |
| IV55429 | Cisco 12410 seems to completemoddeling then fails |
| IV44555 | Command address-family/ipv4/_g-number/vrf is not modeled properly |
| IV53817 | Cisco ASR 172.25.205.235 not modeled completely |