SNMP Light sensor

The SNMP Light sensor supports Level 1 discovery of SNMP network devices.

In Level 1 discovery profiles, use the SNMP Light sensor with the Stack Scan sensor to improve the accuracy of the discovery. In Level 2 or Level 3 discovery profiles, use the SNMP MIB2 sensor, which discovers additional data for building detailed Level 2 topologies.

The SNMP Light sensor gathers the data that is shown in the following tabs of the Details pane:

General
SNMP Info

The SNMP Light sensor and the SNMP MIB2 sensor gather generic information from the following object identifiers (OIDs):

snmpwalk -v 3 -u cmdbadmin -l authPriv -a MD5 -A "" -x DES -X "" 10.199.250.9 
   .1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-JK9SV-M), Version 12.2(17d)SXB11, 
   RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled T

snmpwalk -v 3 -u cmdbadmin -l authPriv -a MD5 -A "" -x DES -X "Y1UN9;4b/1tz9l#" 
   10.199.250.9 .1.3.6.1.2.1.1.2.0
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.400

snmpwalk -v 3 -u cmdbadmin -l authPriv -a MD5 -A "" -x DES -X "Y1UN9;4b/1tz9l#" 
   10.199.250.9 .1.3.6.1.2.1.1.4.0
SNMPv2-MIB::sysContact.0 = STRING: Network Support - CH

snmpwalk -v 3 -u cmdbadmin -l authPriv -a MD5 -A "" -x DES -X "" 10.199.250.9 
   .1.3.6.1.2.1.1.5.0
SNMPv2-MIB::sysName.0 = STRING: NC89ZNC01TSL302

snmpwalk -v 3 -u cmdbadmin -l authPriv -a MD5 -A “" -x DES -X "" 10.199.250.9 
   .1.3.6.1.2.1.1.6.0
SNMPv2-MIB::sysLocation.0 = STRING: NC89ACB01

Sensor name that is used in the GUI and logs

SnmpLightSensor

Model objects created

The sensor creates the following model objects:

sys.UnitaryComputerSystem
sys.OperatingSystem
sys.SnmpSystemGroup