show sensors-temperature

This command displays the values for sensors that read temperatures.

Syntax

show sensors-temperature

Availability

Physical appliances only.

Guidelines

The show sensors-temperature command provides values for sensors that read temperatures. These sensors provide the temperature of the air that flows through the appliance and key components of the appliance.
  • Temperature of each internal CPU components

    For Type 8436 appliances, the sensors also read the temperature for each DIMM of the CPU components.

  • Temperature of the internal inlet and outlet air temperatures

    For Type 8436 appliances, the System 1 sensor reads the inlet air temperature that is located in the front of the appliance. The System 2 sensor reads the outlet air temperature that is located in the rear of the appliance.

The output for the show sensors-temperature command includes the following data.
  • The name of the temperature sensor.
  • The most recent reading of the temperature sensor in degree Celsius. There are only three significant digits.
  • The temperature at which a warning of high temperature occurs. If the temperature is above this value, investigate the cause and correct the problem.
  • The temperature at which a critical error of high temperature occurs. If the temperature is above this value, correct the problem immediately.
  • The temperature at which a risk of permanent damage to the appliance exists. If the temperature is above this threshold, correct the problem immediately. Otherwise, turn off the power supply of the appliance.
  • Whether the current temperature is OK or exceeds the warning, critical, or danger threshold.