Status resources

The following URIs give access to the status resources on the appliance.

/mgmt/status/
You can use the HTTP GET method with the /mgmt/status/ resource to list all available status providers on the appliance.
/mgmt/status/default/ActiveUsers
You can use the HTTP GET method with the /mgmt/status/default/ActiveUsers resource to list the currently active appliance users.
/mgmt/status/default/CryptoModeStatus
You can use the HTTP GET method with the /mgmt/status/default/CryptoModeStatus resource to view the current crypto mode of the appliance (the crypto mode controls the encryption used for system management aspects of the appliance).
/mgmt/status/default/CurrentSensors
You can use the HTTP GET method with the /mgmt/status/default/CurrentSensors resource to view status information about the power supply to the appliance. The status is derived from sensors that read electrical currents, from the power supplies and other components of the appliance.
/mgmt/status/default/DateTimeStatus
You can use the HTTP GET method with the /mgmt/status/default/DateTimeStatus resource to request date and time settings and information from the appliance.
/mgmt/status/default/DateTimeStatus2
You can use the HTTP GET method with the /mgmt/status/default/DateTimeStatus2 resource to request date and time settings and information from the appliance. (This call returns the same information as /mgmt/status/default/DateTimeStatus, but some of the returned information is formatted differently.)
/mgmt/status/default/DNSCacheHostStatus4
You can use the HTTP GET method with the /mgmt/status/default/DNSCacheHostStatus4 resource to request information about the host name/IP address pairs that are currently stored in the DNS cache. A new entry is stored each time the appliance successfully looks up a host name on a DNS server. The name can be either fully qualified (for example, servername.uk.ibm.com) or a partial host name (for example, servername).
/mgmt/status/default/DNSNameServerStatus2
You can use the HTTP GET method with the /mgmt/status/default/DNSNameServerStatus2 resource to request a list of configured and acquired name servers.
/mgmt/status/default/DNSSearchDomainStatus
You can use the HTTP GET method with the /mgmt/status/default/DNSSearchDomainStatus resource to request a list of configured and acquired search domains.
/mgmt/status/default/DNSStaticHostStatus
You can use the HTTP GET method with the /mgmt/status/default/DNSStaticHostStatus resource to request a list of configured static hosts.
/mgmt/status/default/DomainStatus
You can use the HTTP GET method with the /mgmt/status/default/DomainStatus resource to request the status of the default domain.
/mgmt/status/default/EnvironmentalFanSensors
You can use the HTTP GET method with the /mgmt/status/default/EnvironmentalFanSensors resource to request information from fan sensors on the appliance.
/mgmt/status/default/EnvironmentalSensors
You can use the HTTP GET method with the /mgmt/status/default/EnvironmentalSensors resource to request information from various sensors on the appliance.
/mgmt/status/default/EthernetCountersStatus
You can use the HTTP GET method with the /mgmt/status/default/EthernetCountersStatus resource to request detailed statistics for each Ethernet device on the appliance.
/mgmt/status/default/EthernetMAUStatus
You can use the HTTP GET method with the /mgmt/status/default/EthernetMAUStatus resource to request the device-specific status of Ethernet MAUs on the system..
/mgmt/status/default/EthernetMIIStatus
You can use the HTTP GET method with the /mgmt/status/default/EthernetMIIStatus resource to request detailed statistics available for each Ethernet MII registers on the appliance.
/mgmt/status/default/FailureNotificationStatus2
You can use the HTTP GET method with the /mgmt/status/default/FailureNotificationStatus2 resource to request a history of recently generated error reports.
/mgmt/status/default/FilesystemStatus
You can use the HTTP GET method with the /mgmt/status/default/FilesystemStatus resource to request the current usage of storage capacity on the appliance.
/mgmt/status/default/FirmwareStatus2
You can use the HTTP GET method with the /mgmt/status/default/FirmwareStatus2 resource to request information about the current firmware installation.
/mgmt/status/default/FirmwareStatus
You can use the HTTP GET method with the /mgmt/status/default/FirmwareStatus resource to request information about the current firmware installation.
/mgmt/status/default/FirmwareVersion3
You can use the HTTP GET method with the /mgmt/status/default/FirmwareVersion3 resource to list the version of the firmware and its components as well as the machine and model type for the appliance. You need this information to report problems.
/mgmt/status/default/IGMPStatus
You can use the HTTP GET method with the /mgmt/status/default/IGMPStatus resource to request status information about Internet Group Management Protocol (IGMP) on interfaces on the appliance.
/mgmt/status/default/IPAddressStatus
You can use the HTTP GET method with the /mgmt/status/default/IPAddressStatus resource to request status information about interfaces on the appliance.
/mgmt/status/default/IPMISelEvents
You can use the HTTP GET method with the /mgmt/status/default/IPMISelEvents resource to request a list of the Intelligent Platform Management Interface (IPMI) System Event Log (SEL) events that the Baseboard Management Controller (BMC) collected.
/mgmt/status/default/LicenseStatus
You can use the HTTP GET method with the /mgmt/status/default/LicenseStatus resource to request information about available and enabled features.
/mgmt/status/default/LinkAggregationStatus
You can use the HTTP GET method with the /mgmt/status/default/LinkAggregationStatus resource to request statistics for aggregate interfaces.
/mgmt/status/default/LinkAggregationMemberStatus
You can use the HTTP GET method with the /mgmt/status/default/LinkAggregationMemberStatus resource to request a mapping of links to aggregates on the system.
/mgmt/status/default/LinkStatus
You can use the HTTP GET method with the /mgmt/status/default/LinkStatus resource to request status for the interfaces on the appliance.
/mgmt/status/default/LoadBalancerStatus2
You can use the HTTP GET method with the /mgmt/status/default/LoadBalancerStatus2 resource to request status for any configured load balancer groups that the appliance is a member of.
/mgmt/status/default/LogTargetStatus
You can use the HTTP GET method with the /mgmt/status/default/LogTargetStatus resource to view the status for each log target on the appliance.
/mgmt/status/default/MQSystemResources
You can use the HTTP GET method with the /mgmt/status/default/MQSystemResources resource to request status for information for IBM® MQ resources on the appliance. This information does not includes whether file systems are encrypted or not and so this resource is deprecated. Use /mgmt/status/default/MQSystemResources2 instead.
/mgmt/status/default/MQSystemResources2
You can use the HTTP GET method with the /mgmt/status/default/MQSystemResources2 resource to request status for information for IBM MQ resources on the appliance. This includes whether file systems are encrypted or not.
/mgmt/status/default/NDCacheStatus2
You can use the HTTP GET method with the /mgmt/status/default/NDCacheStatus2 resource to request status information about IPv6 Neighbor Discovery (ND) translations on all interfaces.
/mgmt/status/default/NetworkInterfaceStatus
You can use the HTTP GET method with the /mgmt/status/default/NetworkInterfaceStatus resource to request status information about the network interfaces on the appliance.
/mgmt/status/default/NTPRefreshStatus
You can use the HTTP GET method with the /mgmt/status/default/NTPRefreshStatus resource to request status information about the most recent NTP refresh.
/mgmt/status/default/ObjectStatus
You can use the HTTP GET method with the /mgmt/status/default/ObjectStatus resource to request information about the status of configuration objects on the appliance.
/mgmt/status/default/OtherSensors
You can use the HTTP GET method with the /mgmt/status/default/OtherSensors resource to request status information about the sensors on the appliance that have true or false values.
/mgmt/status/default/PCIbus
You can use the HTTP GET method with the /mgmt/status/default/PCIbus resource to retrieve a list of the PCI functions on the system. The functions are identified by domain, bus, device, and function.
/mgmt/status/default/QueueManagersStatus
You can use the HTTP GET method with the /mgmt/status/default/QueueManagersStatus resource to retrieve detailed status of available queue managers.
/mgmt/status/default/RaidArrayStatus
You can use the HTTP GET method with the /mgmt/status/default/RaidArrayStatus resource to retrieve details about the status of the RAID array.
/mgmt/status/default/RaidBatteryModuleStatus
You can use the HTTP GET method with the /mgmt/status/default/RaidBatteryModuleStatus resource to retrieve details about the battery backup unit (BBU) of the RAID controller. The BBU protects against the loss of cached data in the event of a power failure.
/mgmt/status/default/RaidControllerStatus
You can use the HTTP GET method with the /mgmt/status/default/RaidControllerStatus resource to retrieve details about the RAID controller.
/mgmt/status/default/RaidPhysicalDriveStatus
You can use the HTTP GET method with the /mgmt/status/default/RaidPhysicalDriveStatus resource to retrieve details about the RAID physical drives.
/mgmt/status/default/RaidSsdStatus
You can use the HTTP GET method with the /mgmt/status/default/RaidSsdStatus resource to retrieve details about the status of the SSD disks on the appliance.
/mgmt/status/default/RoutingStatus3
You can use the HTTP GET method with the /mgmt/status/default/RoutingStatus3 resource to retrieve routing table details. This table describes the IP routes on the appliance. The table includes static and default routes from interface configuration and dynamic routes from discovery protocols.
/mgmt/status/default/ServicesMemoryStatus2
You can use the HTTP GET method with the /mgmt/status/default/ServicesMemoryStatus2 resource to view information about memory usage by services on the appliance.
/mgmt/status/default/ServicesStatus
You can use the HTTP GET method with the /mgmt/status/default/ServicesStatus resource to view information about active services on the appliance.
/mgmt/status/default/SNMPStatus
You can use the HTTP GET method with the /mgmt/status/default/SNMPStatus resource to view the SNMP status on the appliance.
/mgmt/status/default/SSHTrustedHostStatus
You can use the HTTP GET method with the /mgmt/status/default/SSHTrustedHostStatus resource to view the SSH known host table on the appliance.
/mgmt/status/default/SystemCpuStatus
You can use the HTTP GET method with the /mgmt/status/default/SystemCpuStatus resource to request information about CPU usage on the appliance.
/mgmt/status/default/SystemMemoryStatus
You can use the HTTP GET method with the /mgmt/status/default/SystemMemoryStatus resource to request information about memory usage on the appliance.
/mgmt/status/default/TCPSummary
You can use the HTTP GET method with the /mgmt/status/default/TCPSummary resource to list the number of TCP connections on this appliance in each of the states defined in the TCP specification, RFC 793.
/mgmt/status/default/TCPTable
You can use the HTTP GET method with the /mgmt/status/default/TCPTable resource to list all TCP connections on the system. Active connections and listeners are included. For listeners that are related to router configuration objects, the table indicates with what object the listener is associated.
/mgmt/status/default/TemperatureSensors
You can use the HTTP GET method with the /mgmt/status/default/TemperatureSensors resource to get information from sensors that read temperatures, both of the air flowing through the appliance and of key components in the appliance.
/mgmt/status/default/VlanInterfaceStatus2
You can use the HTTP GET method with the /mgmt/status/default/VlanInterfaceStatus2 resource to retrieve status for VLAN interfaces on the appliance.
/mgmt/status/default/VoltageSensors
You can use the HTTP GET method with the /mgmt/status/default/VoltageSensors resource to get information from sensors that read voltages, from the power supplies and other components of the appliance.

Parent topic: REST API resources