Introducing the IBM MQ Appliance M2003
The IBM® MQ Appliance provides IBM MQ V9.4 on an easy-to-deploy appliance.
The IBM MQ Appliance has the model number M2003, and the MTM 8496-54X.
Hardware specifications
The following tables summarize the specifications for the chassis.
| Dimensions | |
|---|---|
| Height | 3.46 in. (88 mm) |
| Width | 18.98 in. (482 mm) |
| Depth | 26.77 in. (680 mm) |
| Appliance weight | 66.14 lb. (30 kg) |
| Shipping weight | 88.18 lb. (40 kg) |
| Dimensions | |
|---|---|
| Power Supply | Two, 1300 Watt power supply modules |
| Sine-wave | 50/60 Hz (single-phase) required |
| 110 Voltage AC | 100 to 127 Volt (nominal) at 12.0 Amperes |
| 220 Voltage AC | 200 to 240 Volt (nominal) at 7.0 Amperes |
| Dimensions | |
|---|---|
| Idle | 378.0 watts (1289.78 Btu) per hour |
| Maximum | Maximum: 549.0 watts (1873.26 Btu) per hour |
| Airflow direction | Front to back |
| Dimensions | |
|---|---|
| Shipping | -40° to 140° F (-40° to 60° C) |
| Power off | -4° to 140° F (-20° to 60° C) |
| Power on | 50° to 95° F (10° to 25° C) |
| Maximum altitude | Operating: 6998 ft. (2133m) Storage: 39,370 ft. (12,000m) |
| Humidity | 40° C (104° F) at 95% relative humidity (operating) |
Intrusion detection
The appliance has an internal intrusion detection switch.
The intrusion switch and intrusion detection are enabled by default. An administrator can configure the appliance to ignore signals from the intrusion detection switch or to reset intrusion detection.
If intrusion detection is enabled and the appliance detects an intrusion during normal operation, a warning message is displayed in the GUI for newly connected sessions and the appliance restarts in failsafe mode.
An administrator can reset the intrusion detection with the clear intrusion-detected command, see clear intrusion-detected.