Adding meter readings
Use the Locations application to specify meter readings for a location. A historical reading has a New Reading Date that is prior to the last reading date.
Before you begin
Procedure
- On the Meters tab of the Locations application, display the location for which you want to specify meter readings.
- Select the Enter Meter Readings action.
- In the New Reading field for that meter, specify a value. The Average Units/Day field value is calculated and displays.
- Optional: If you specify a delta reading, select the Delta check box. If the location of the meter was set up as a delta reading type, the check box is selected by default.
- Optional: If you specify an actual reading that is a rollover reading (the new reading value is less than the Last Reading value due to a rollover), select the Rollover check box.
- Click View Details.
- In the New Reading Date field, edit the date and time.
- In the Remarks field, type a comment about the reading.
- Click OK and click Save Location. If the location is associated with a preventive maintenance, the meter reading fields on the preventive maintenance record are updated.