tape_34xxEdit online Messages with a prefix tape_34xx are issued by the channel-attached tape device driver and relate to an IBM® 3480 or IBM 3490 magnetic tape subsystem. tape_34xx.01b705<bus ID of the tape device>: The tape unit is not readytape_34xx.0a2df0<bus ID of the tape device>: The tape information states an incorrect lengthtape_34xx.0dcb6e<bus ID of the tape device>: A parity error occurred on the tape bustape_34xx.1438e6<bus ID of the tape device>: A channel interface error cannot be recoveredtape_34xx.150bb7<bus ID of the tape device>: The tape unit does not support tape format 3480-2 XFtape_34xx.15d49e<bus ID of the tape device>: The maximum block size for buffered mode is exceededtape_34xx.1e4d72<bus ID of the tape device>: Opening the tape failed because of missing end-of-file markstape_34xx.257c56<bus ID of the tape device>: A path equipment check occurred for the tape devicetape_34xx.2caadc<bus ID of the tape device>: I/O error recovery failed on the tape control unittape_34xx.33278e<bus ID of the tape device>: A write error on the tape cannot be recoveredtape_34xx.3be0ed<bus ID of the tape device>: Reading the tape beyond the end of the recorded area failedtape_34xx.3f2d36<bus ID of the tape device>: The tape unit does not support format 3480 XFtape_34xx.3f38f7<bus ID of the tape device>: A data overrun occurred between the control unit and tape unittape_34xx.442701<bus ID of the tape device>: The tape unit does not support the tape lengthtape_34xx.553e40<bus ID of the tape device>: Writing the ID-mark failedtape_34xx.633cc6<bus ID of the tape device>: The tape unit requires a firmware updatetape_34xx.64dd87<bus ID of the tape device>: The tape medium has been rewound or unloaded manuallytape_34xx.696dc8<bus ID of the tape device>: The tape medium is write-protectedtape_34xx.69f60e<bus ID of the tape device>: The tape unit does not support the current tape lengthtape_34xx.6bcece<bus ID of the tape device>: The tape unit is already assignedtape_34xx.6e320b<bus ID of the tape device>: The size of the recorded area is <number of blocks> blockstape_34xx.7f9ae4<bus ID of the tape device>: A channel protocol error occurredtape_34xx.85efa7<bus ID of the tape device>: The block ID sequence on the tape is incorrecttape_34xx.8ce1c3<bus ID of the tape device>: The tape cartridge has been successfully unloadedtape_34xx.956e53<bus ID of the tape device>: The tape does not have the required tape tensiontape_34xx.a6fc3e<bus ID of the tape device>: Determining the size of the recorded area...tape_34xx.aaef3e<bus ID of the tape device>: A tape unit was detached while in usetape_34xx.b334e9<bus ID of the tape device>: The tape unit is not onlinetape_34xx.bedee0Tape device <bus ID of the tape device> is busy, refusing to suspendtape_34xx.c5ee4a<bus ID of the tape device>: Automatic unloading of the tape cartridge failedtape_34xx.c7fc10<bus ID of the tape device>: The tape unit does not support the compaction algorithmtape_34xx.ccc5ad<bus ID of the tape device>: The tape unit failed to load the cartridgetape_34xx.cfc6c4<bus ID of the tape device>: An equipment check has occurred on the tape unittape_34xx.d10f9dA cartridge is loaded in tape device <bus ID of the tape device>, refusing to suspendtape_34xx.d2b071<bus ID of the tape device>: A read error occurred that cannot be recoveredtape_34xx.d56330<bus ID of the tape device>: The tape contains an incorrect block ID sequencetape_34xx.d608a6<bus ID of the tape device>: The control unit has fenced access to the tape volumetape_34xx.e473c9<bus ID of the tape device>: The tape subsystem is running in degraded modetape_34xx.e96040<bus ID of the tape device>: The tape unit cannot process the tape formattape_34xx.f06a05<bus ID of the tape device>: An unexpected condition <number> occurred in tape error recoverytape_34xx.fbea0c<bus ID of the tape device>: A tape cartridge has been mountedParent topic: Linux on Z and LinuxONE kernel messages